ZJ90DBS Drilling Rig Spare Parts Supply

1. Introduction

We are a professional supplier focusing on providing full-series genuine spare parts for ZJ90DBS drilling rigs, covering all core components of the drilling rig system. The spare parts we supply are fully compatible with ZJ90DBS drilling rigs, including but not limited to crown block, derrick, base, JC90DB winch, HHF-1600 mud pump, rotary table drive, solid control system, ZS4/z-01 linear vibrating screen, ZQJ250x3-100x16-3P integrated desanding and desilting machine, drilling fluid manifold, cementing manifold, air control system, hydraulic system, F35-70 BOP stack, FKQ1280-8 ground blowout preventer control device, QST140-J pneumatic pressure test bench, YJG103X78-70 manifold, top drive (DQ675DBZ), and HH drilling rig after-sales service accessory box. All spare parts comply with national and industrial standards (such as GB/T, JB, API Spec 7K), pass strict factory quality inspection, and fully match the original equipment specifications, ensuring stable operation and long service life.

Our target users are segmented according to the actual application scenarios of ZJ90DBS drilling rigs to accurately meet diverse procurement and maintenance needs: 1) Oil and gas drilling companies: Providing bulk genuine spare parts for new rig commissioning, daily maintenance and periodic overhaul of ZJ90DBS drilling rigs, ensuring continuous and stable operation of drilling operations; 2) Drilling rig maintenance and after-sales service providers: Supplying full-model matching replacement parts, including vulnerable parts, wearing parts and special components, solving the pain point of difficult procurement of special and old models; 3) Oilfield operation units: Providing emergency spare parts supply services to quickly replace damaged components in case of on-site faults, reducing downtime and avoiding economic losses; 4) Drilling equipment leasing companies: Providing comprehensive spare parts supporting services to extend the service life of leased ZJ90DBS drilling rigs and reduce maintenance costs. Whether it is routine maintenance, emergency repair or bulk procurement, we can provide professional, efficient and reliable one-stop solutions.

2. Core Purpose

The core purpose of supplying ZJ90DBS drilling rig spare parts is to integrate spare parts supply, technical support and after-sales service, providing users with professional solutions for ZJ90DBS drilling rig maintenance and operation. On the procurement side, we ensure the authenticity, completeness and compatibility of all spare parts, eliminate the risk of equipment failure caused by using counterfeit and shoddy spare parts, and provide competitive prices and stable supply capacity; on the use side, we provide detailed product parameters, functional descriptions, applicable working conditions and installation guidance, helping users select the correct spare parts quickly, avoid mismatches, and improve maintenance efficiency; on the technical support side, we provide on-site fault maintenance guidance, maintenance suggestions and professional technical consultation, helping users solve technical problems encountered in the process of using and maintaining spare parts, reduce maintenance costs, and ensure the safe, efficient and continuous operation of ZJ90DBS drilling rigs.

3. Product Introduction

3.1 Product Category Overview

The ZJ90DBS drilling rig spare parts we supply cover all core systems of the drilling rig, with complete models, clear classification and high compatibility. Each category of spare parts has unique performance characteristics, which are closely matched with the corresponding components of the ZJ90DBS drilling rig. The specific categories are as follows:

• Structural Component Spare Parts: Including crown block spare parts (bolts, nuts, pins, washers, oil cups), derrick spare parts (various specifications of pins, shear pins), base spare parts (pins, shear pins), etc. These are the core structural components of the drilling rig, responsible for bearing loads, ensuring the stability and structural integrity of the drilling rig.

• Winch & Mud Pump Spare Parts: Covering JC90DB winch spare parts (filter elements, rope stopper rollers, pressure regulating relays, quick release valves), HHF-1600 mud pump spare parts (oil seals, sealing rings, valve rubbers, cylinder liners, pistons, airbags), etc. They are the key power components of the drilling rig, ensuring the normal operation of hoisting and mud circulation.

• Solid Control & Screening Equipment Spare Parts: Including solid control system spare parts (stainless steel ball valves, butterfly valve extension rods, flanges, sealing rings), ZS4/z-01 linear vibrating screen spare parts (nuts, screws, rubber damping strips, hook screens), ZQJ250x3-100x16-3P integrated desanding and desilting machine spare parts, etc. They are used to purify drilling fluid and ensure the quality of drilling operations.

• Manifold & Pipeline Spare Parts: Covering drilling fluid manifold and cementing manifold spare parts (welded union sealing rings, bolts, nuts, cotter pins), air control system spare parts (stainless steel ball valves, straight joints, tee joints, shuttle valves, air control valves), hydraulic system spare parts (ferrule joints, O-ring seals, combined sealing washers, pressure gauges, quick change connectors), etc. They are responsible for the transmission and control of drilling fluid, cement slurry, air and hydraulic oil.

• BOP & Control Device Spare Parts: Including F35-70 BOP stack spare parts (O-ring seals, U-ring seals, pressure rings, rubber springs), FKQ1280-8 ground blowout preventer control device spare parts (O-ring seals, skeleton seal rings, packing), etc. They are the core safety components of the drilling rig, ensuring the safety of drilling operations and preventing blowout accidents.

• Electrical & Auxiliary Spare Parts: Including electrical accessories (indicator lights, fusible cores, optical fiber lines, terminals, bulbs), common seals, shackles, rope clamps, HH drilling rig after-sales service accessory boxes, etc. They provide auxiliary support for the normal operation of the drilling rig, ensuring the integrity and reliability of the entire system.

3.2 Key Product Advantages

All ZJ90DBS drilling rig spare parts we supply have been verified by long-term on-site application, with the following core advantages, and are widely recognized by oil and gas drilling users at home and abroad:

• 100% Compatibility: All spare parts are designed and produced according to the original specifications of ZJ90DBS drilling rigs, fully matching the original components, and can be directly installed and used without modifying the equipment structure, ensuring the consistency of equipment performance.

• High Quality & Reliability: Adopt high-quality raw materials (such as 2Cr13, 35CrMo, nitrile rubber, stainless steel) and precision manufacturing technology, complying with API Spec 7K, GB/T and other authoritative standards. Each spare part passes strict pressure resistance, wear resistance, sealing and other performance tests, and can work stably in harsh oilfield drilling environments.

• Complete Models & Sufficient Inventory: We have a complete inventory of all spare parts listed in the ZJ90DBS spare parts list, including common vulnerable parts, wearing parts and special components, which can meet the needs of routine maintenance, periodic overhaul and emergency repair of users.

• Genuine Guarantee & Traceability: All spare parts are sourced from formal channels, with complete quality certificates, inspection reports and traceability codes, ensuring that each spare part is genuine, and eliminating the risk of users purchasing counterfeit and shoddy products.

• Easy Installation & Maintenance: The structural design of the spare parts is consistent with the original components, with standardized installation sizes and simple disassembly and assembly. Wearing parts are easy to replace, which reduces the difficulty and time of maintenance for users.

4. Function Description

The spare parts of ZJ90DBS drilling rig are the key to ensuring the normal operation of the drilling rig. Each category of spare parts has a clear and important function, which is closely related to the safety and efficiency of drilling operations. The core functions of different categories of spare parts are detailed as follows, helping users better understand and use the spare parts:

4.1 Structural Component Spare Parts Functions

• Crown Block Spare Parts: Bolts (M30×130, M12×45), nuts (M30, M12), pins (5×60, 4×65) and washers (30, 16) are used to fix and connect the components of the crown block, ensuring the structural stability of the crown block; straight through oil cups (M10×1, M8×1) and joint type oil cups (M10×1, M8×1) are used to add lubricating oil to the moving parts of the crown block, reducing friction and extending service life.

• Derrick & Base Spare Parts: Various specifications of pins (φ100×400, φ55×230, φ40×145) and shear pins (φ25×180, φ15×95) are used to connect the derrick and base components, bearing the load of the drilling rig and ensuring the overall stability; shear pins can be broken in case of overload, protecting the derrick and base from damage.

4.2 Winch & Mud Pump Spare Parts Functions

• JC90DB Winch Spare Parts: Filter elements (secondary filter, primary oil filter) are used to filter impurities in the hydraulic oil of the winch, protecting the hydraulic system from damage; rope stopper rollers are used to limit the position of the steel wire rope and prevent the steel wire rope from slipping; pressure regulating relays (QF506) and quick release valves (KPJ-L10) are used to regulate the pressure of the winch air control system and ensure stable operation.

• HHF-1600 Mud Pump Spare Parts: Oil seals (9.125″×10.375″×0.625″), sealing rings (cylinder head sealing rings, bonnet sealing rings) and O-rings are used to seal the mud pump, preventing leakage of drilling fluid and hydraulic oil; valve rubbers and piston sealing rings are used to ensure the sealing performance of the pump valve and piston, improving the pumping efficiency of the mud pump; cylinder liners and piston assemblies are the core components of the mud pump, responsible for conveying drilling fluid; airbags (inhaled air bag, exhaust air bag) are used to buffer the pressure fluctuation of the mud pump and ensure stable operation.

4.3 Solid Control, Manifold & Auxiliary Spare Parts Functions

• Solid Control System Spare Parts: Stainless steel ball valves and butterfly valve extension rods are used to control the on-off and flow of drilling fluid; flanges and sealing rings are used to connect the pipelines of the solid control system, ensuring tight connection and no leakage; hook screens (110 mesh, 140 mesh, 175 mesh) are used to filter impurities in drilling fluid, purifying the drilling fluid.

• Air Control & Hydraulic System Spare Parts: Stainless steel ball valves, straight joints, tee joints and elbows are used to connect the air and hydraulic pipelines, ensuring the smooth transmission of air and hydraulic oil; shuttle valves (QSL-10) and two-position three-way normally closed air control valves (QY22) are used to control the flow direction of air, ensuring the normal operation of the air control system; ferrule joints and sealing washers are used to seal the hydraulic pipelines, preventing oil leakage; pressure gauges are used to monitor the pressure of the hydraulic system, ensuring safe operation.

• BOP & Control Device Spare Parts: O-ring seals, U-ring seals and pressure rings are used to seal the BOP stack and blowout preventer control device, ensuring the sealing performance and pressure resistance; rubber springs are used to buffer the impact of the BOP stack, protecting the components from damage; skeleton seal rings and packing are used to seal the moving parts of the control device, preventing oil leakage.

• Electrical & Common Spare Parts: Indicator lights are used to display the working status of the electrical system; fusible cores are used to protect the electrical components from overload damage; optical fiber lines and terminals are used to transmit electrical signals; shackles and rope clamps are used to fix the steel wire rope, ensuring the safety of hoisting operations.

5. Structural Characteristics

The structural design of ZJ90DBS drilling rig spare parts focuses on adaptability, reliability and durability, fully considering the harsh working environment of oilfield drilling (high pressure, high temperature, dust, vibration). The structural characteristics of different categories of spare parts are basically consistent, with the following key points:

5.1 Structural Component Spare Parts (Bolts, Nuts, Pins)

• Bolts & Nuts: Made of high-strength steel (10.9 level, 8.8 level), with high tensile strength and shear strength. The thread is processed by precision rolling, with good tightness and wear resistance, not easy to loosen under vibration; some bolts are galvanized, with good corrosion resistance, adapting to the humid and corrosive oilfield environment.

• Pins & Shear Pins: Made of high-quality alloy steel, with high hardness and toughness. The surface is treated by quenching and tempering, with good wear resistance; shear pins are designed with a special weak section, which can be broken in case of overload, protecting the main components from damage, and the structural design is reasonable and easy to replace.

5.2 Sealing Spare Parts (O-rings, Oil Seals, Sealing Rings)

• O-ring Seals: Made of high-quality nitrile rubber, fluorine rubber and other materials, with good elasticity, wear resistance and high temperature resistance. The size is accurate, and the fit with the sealing groove is good, ensuring excellent sealing performance under high pressure and high temperature conditions; complying with GB/T3452.1-2005, GB3452-325X7 and other standards, with strong interchangeability.

• Oil Seals & Combined Sealing Washers: Oil seals (single lip, double lip) are designed with a dust-proof edge, which can prevent dust and impurities from entering the interior, protecting the rotating parts; combined sealing washers are integrated with metal washers and rubber washers, with good pressure resistance and sealing performance, suitable for high-pressure pipeline connections, complying with JB982-77 standard.

5.3 Core Equipment Spare Parts (Cylinder Liners, Pistons, Valves)

• Cylinder Liners & Pistons: Cylinder liners are made of high-precision seamless steel pipe, with high straightness and wear resistance; the inner surface is treated by honing, with good surface finish, reducing the friction between the piston and the cylinder liner. Pistons are made of high-strength alloy steel, with good wear resistance and corrosion resistance; the piston surface is equipped with multiple sealing rings, ensuring good sealing performance.

• Valves & Valve Rubbers: Valves are made of high-quality stainless steel, with good corrosion resistance and wear resistance; the valve seat is designed with a special structure, ensuring tight sealing. Valve rubbers are made of high elasticity and wear-resistant rubber materials, with good sealing performance and long service life, adapting to the erosion of drilling fluid.

5.4 Electrical & Auxiliary Spare Parts

• Electrical Accessories: Indicator lights and bulbs are made of high-temperature resistant materials, with good insulation performance and long service life; fusible cores are made of low-melting point alloy, with accurate fusing current, effectively protecting electrical components. Optical fiber lines are made of high-quality optical fiber materials, with low signal loss and good stability.

• Common Spare Parts: Shackles and rope clamps are made of high-strength steel, with high load-bearing capacity and good toughness; the surface is galvanized or painted, with good corrosion resistance. Rubber damping strips are made of nitrile rubber, with good elasticity and shock absorption performance, reducing the vibration of the screening equipment.

6. Applicable Working Conditions

The ZJ90DBS drilling rig spare parts we supply have strong environmental adaptability, which can fully adapt to the harsh working conditions of oilfield drilling, and are applicable to various onshore oil and gas drilling sites. The specific applicable working conditions are detailed as follows, helping users better select and use spare parts:

6.1 General Applicable Conditions

• Temperature Range: -40℃ to 80℃, which can work stably in both low-temperature cold regions (such as northern oilfields) and high-temperature hot regions (such as western desert oilfields).

• Pressure Range: According to the spare part category, the pressure resistance range is 0-100MPa; hydraulic system spare parts can withstand high pressure up to 40MPa, BOP stack spare parts can withstand high pressure up to 100MPa, fully meeting the pressure requirements of ZJ90DBS drilling rigs.

• Medium Adaptability: Sealing spare parts can adapt to drilling fluid, hydraulic oil, air, cement slurry and other media; stainless steel spare parts have good corrosion resistance, adapting to the corrosive drilling fluid and humid environment.

• Environmental Conditions: It can work normally in dusty, sandy, humid, rainy, windy and corrosive environments; explosion-proof spare parts (such as explosion-proof pressure gauges) can be used in flammable and explosive oilfield environments, meeting the explosion-proof requirements of the site.

• Vibration Resistance: All spare parts have good vibration resistance, can withstand the strong vibration generated during the operation of the drilling rig, and are not easy to loose, damage or fail.

6.2 Category-Specific Applicable Working Conditions

• Structural Component Spare Parts: Applicable to the outdoor open-air environment of the drilling rig, with strong wind resistance, dust resistance and corrosion resistance, able to bear the load and vibration generated during drilling operations.

• Winch & Mud Pump Spare Parts: Applicable to the high-pressure, high-temperature and high-vibration environment of the winch and mud pump room; mud pump spare parts need to adapt to the erosion of drilling fluid, with good corrosion resistance and wear resistance.

• BOP & Control Device Spare Parts: Applicable to the high-pressure environment of the wellhead, able to withstand the high pressure of drilling fluid and formation fluid, with excellent sealing performance and pressure resistance; suitable for flammable and explosive environments, ensuring the safety of drilling operations.

• Electrical Spare Parts: Applicable to the humid and dusty environment of the drilling rig electrical room, with good insulation performance and dust-proof performance; some electrical spare parts have explosion-proof performance, adapting to flammable and explosive environments.

• Solid Control System Spare Parts: Applicable to the environment with a lot of drilling fluid and impurities, with good wear resistance and corrosion resistance; hook screens need to adapt to the impact of drilling fluid, with good tensile strength and wear resistance.

7. Maintenance and Maintenance Suggestions

Scientific maintenance and maintenance of ZJ90DBS drilling rig spare parts can effectively extend the service life of the spare parts, reduce the failure rate of the drilling rig, and reduce maintenance costs. The following are detailed maintenance suggestions, which are applicable to all series of spare parts and can be adjusted according to the actual use situation of the drilling rig:

7.1 Daily Maintenance (Before and After Drilling Operation)

• Before starting the drilling rig, check the appearance of the spare parts for damage, loose connection, leakage and other phenomena; check the tightness of bolts, nuts and pins, and re-tighten if loose; check the filter elements of the winch and mud pump, if clogged, clean or replace them in time; check the oil level of the oil cups, and add lubricating oil if insufficient.

• During drilling operation, pay attention to observing the working status of the spare parts: whether the valves operate flexibly, whether there is abnormal noise or leakage, whether the pressure gauge shows normally, whether the electrical accessories work normally. If any abnormality is found, stop the machine immediately for inspection to avoid expanding the fault range.

• After stopping the drilling rig, clean the surface of the spare parts to remove dust, drilling fluid, oil stains and other pollutants; drain the hydraulic oil and drilling fluid in the pipelines of the mud pump, hydraulic system and manifold to avoid freezing or corrosion; check the sealing rings, oil seals and other vulnerable parts for aging, damage, and replace them in time if necessary; store the spare parts not in use in a dry, ventilated and dust-proof warehouse, and avoid collision and corrosion.

7.2 Regular Maintenance (According to Drilling Working Hours)

• Every 500 Drilling Working Hours: Check all bolts, nuts and pins for wear, deformation and looseness, and replace or re-tighten them if necessary; clean the filter elements of the winch, mud pump and solid control system; check the operation of the valves, and apply an appropriate amount of lubricating oil to the moving parts to ensure flexible operation; check the O-ring seals and oil seals for aging, and replace them in time.

• Every 1000 Drilling Working Hours: Replace the wearing parts such as valve rubbers, piston sealing rings and cylinder liners of the mud pump; replace the hydraulic oil and oil filter of the hydraulic system; check the wear of the steel wire rope, shackles and rope clamps, and replace them if the wear exceeds the standard; check the BOP stack sealing parts for wear and corrosion, and replace them in time; check the electrical accessories for insulation performance, and replace the damaged ones.

• Every 2000 Drilling Working Hours: Disassemble and inspect key spare parts (such as winch components, mud pump cylinders, BOP valves), clean the inner cavity and moving parts; grind the wear surface of the piston rod, valve core and other parts to restore the fit gap; replace the worn filter elements, lubricating oil, sealing parts and other wearing parts; check the overall performance of the spare parts, and adjust the pressure and flow of the system to the optimal range.

7.3 Key Maintenance Notes

• When replacing spare parts, it must use genuine spare parts matching ZJ90DBS drilling rigs (we can provide all matching genuine spare parts), and it is strictly prohibited to use counterfeit and shoddy spare parts or spare parts of other models, which will affect the performance of the drilling rig and even cause safety accidents.

• When disassembling and assembling spare parts, use professional tools to avoid violent operation, so as not to damage the thread, valve core, piston rod and other precision parts; pay attention to the installation direction of the spare parts (such as oil seals, valves), and install them correctly according to the original specifications.

• The medium used (hydraulic oil, drilling fluid, lubricating oil) must meet the specified standards. It is not allowed to use impure or unqualified medium, so as to avoid blocking the valves, wearing the components and affecting the service life of the spare parts.

• Explosion-proof spare parts (such as explosion-proof pressure gauges) must be inspected regularly to ensure that the explosion-proof performance is intact, and it is not allowed to modify or disassemble the explosion-proof structure without authorization.

• Establish a spare parts maintenance record, record the replacement time, working hours and maintenance content of each spare part, so as to track the service life of the spare part and provide a basis for subsequent maintenance and replacement.

8. On-Site Fault Maintenance Cases

The following are 4 real on-site fault maintenance cases of ZJ90DBS drilling rig spare parts, which are common faults in actual drilling operations. Through these cases, users can quickly judge and solve similar faults, reduce drilling rig downtime, and provide reference for technical maintenance:

Case 1: HHF-1600 Mud Pump Leakage Fault

• Fault Phenomenon: During drilling operation, the HHF-1600 mud pump has obvious drilling fluid leakage at the cylinder head, resulting in reduced pumping efficiency of the mud pump and affecting the normal circulation of drilling fluid.

• Fault Judgment: After on-site inspection, it is found that the cylinder head sealing ring (GH3161-05.08) of the mud pump is aging and deformed (the sealing ring has been used for more than 800 working hours), resulting in poor sealing and drilling fluid leakage; at the same time, there are impurities on the sealing surface of the cylinder head, which aggravates the leakage.

• Maintenance Method: Stop the mud pump immediately, drain the drilling fluid in the cylinder; disassemble the cylinder head, remove the aging cylinder head sealing ring; clean the sealing surface of the cylinder head with professional cleaning agent to remove impurities; replace it with the original genuine cylinder head sealing ring (GH3161-05.08), reinstall the cylinder head and tighten the bolts; start the mud pump for test run, the leakage fault is solved, and the pumping efficiency is restored to normal.

• Preventive Measures: Regularly check the cylinder head sealing ring during daily maintenance; replace the sealing ring in time when it is found to be aging; keep the drilling fluid clean to avoid impurities entering the cylinder head and damaging the sealing ring.

Case 2: JC90DB Winch Pressure Instability Fault

• Fault Phenomenon: During the hoisting operation of the JC90DB winch, the pressure of the air control system is unstable, the winch lifting speed is uneven, and there is obvious jitter, which affects the hoisting safety.

• Fault Judgment: On-site inspection shows that the pressure regulating relay (QF506) of the winch is clogged by impurities in the compressed air, resulting in inaccurate pressure regulation; the filter element of the primary oil filter is also clogged, which affects the air supply quality of the air control system; in addition, the quick release valve (KPJ-L10) has internal wear, resulting in air leakage.

• Maintenance Method: Stop the winch operation, cut off the air source; disassemble the pressure regulating relay (QF506), clean the internal components with cleaning agent, and restore the pressure regulation function; replace the filter element of the primary oil filter; replace the worn quick release valve (KPJ-L10) with the original one; connect the air source, adjust the pressure to the rated range, start the winch for test run, the pressure is stable, and the lifting speed is uniform.

• Preventive Measures: Regularly clean the pressure regulating relay and filter element; keep the compressed air clean; check the quick release valve regularly for wear and air leakage, and replace it in time.

Case 3: F35-70 BOP Stack Sealing Failure Fault

• Fault Phenomenon: During well control operation, the F35-70 BOP stack has pressure leakage, the wellhead pressure cannot be maintained, and there is a potential blowout hazard.

• Fault Judgment: After on-site inspection, it is found that the O-ring seal (φ325×7, GB3452-325X7) of the BOP stack side door is worn and damaged, and the sealing surface has scratches, resulting in poor sealing and pressure leakage; the rubber spring (8×5×730, 11148.41.03) of the side door is also deformed, which affects the compression of the O-ring seal.

• Maintenance Method: Stop well control operation immediately, relieve the wellhead pressure; disassemble the BOP stack side door, remove the worn O-ring seal and deformed rubber spring; grind the scratches on the sealing surface to restore the flatness; replace it with the original genuine O-ring seal (φ325×7) and rubber spring (8×5×730); reinstall the side door and tighten the bolts according to the specified torque; conduct pressure test on the BOP stack, the pressure is stable, and there is no leakage.

• Preventive Measures: Regularly inspect the BOP stack sealing parts and rubber springs; replace the O-ring seal regularly according to the maintenance cycle; avoid scratching the sealing surface during disassembly and assembly.

Case 4: ZS4/z-01 Linear Vibrating Screen Vibration Abnormality Fault

• Fault Phenomenon: The ZS4/z-01 linear vibrating screen has abnormal vibration during operation, accompanied by harsh noise, and the screening efficiency is significantly reduced, which affects the purification effect of drilling fluid.

• Fault Judgment: On-site inspection shows that the rubber damping strip (SX3-01.03-12) of the vibrating screen is aging and cracked, losing the shock absorption function, resulting in abnormal vibration; the tension bolt of the screen pressing block (YKLS-01) is loose, resulting in uneven tension of the hook screen, and the hook screen is deformed; in addition, the screws (M24x150) of the vibrating screen are loose, aggravating the vibration.

• Maintenance Method: Stop the vibrating screen operation; replace the aging rubber damping strip with the original one; tighten the tension bolt of the screen pressing block and adjust the tension of the hook screen to make it uniform; replace the deformed hook screen (110 mesh); tighten all loose screws (M24x150); start the vibrating screen for test run, the vibration is normal, the noise disappears, and the screening efficiency is restored.

• Preventive Measures: Regularly check the rubber damping strip, tension bolt and screws of the vibrating screen; replace the rubber damping strip in time when it is found to be aging; check the hook screen regularly for deformation and tension, and adjust or replace it in time.

9. FAQ (Frequently Asked Questions)

The following are 5 common questions about the procurement, use and maintenance of ZJ90DBS drilling rig spare parts, which are sorted out according to the actual needs of users, providing professional answers to help users solve doubts quickly and improve the efficiency of spare parts use and procurement:

10. Procurement Guide & Call to Action

10.1 Procurement Reference Standards

When purchasing ZJ90DBS drilling rig spare parts, you can refer to the following standards to ensure that you purchase genuine, compatible and high-quality spare parts, and avoid economic losses caused by improper procurement:

• Compatibility Standard: Confirm the spare part model, part number, size, material and standard (such as GB/T, JB, API Spec 7K) according to your ZJ90DBS drilling rig manual or original spare part label, and ensure that the purchased spare part is fully compatible with the drilling rig components. We can provide professional model verification service to avoid model mismatch.

• Quality Standard: Choose suppliers that can provide genuine spare parts and complete quality certificates, inspection reports and traceability codes, avoid purchasing counterfeit and shoddy spare parts. All our spare parts are genuine, complying with national and industrial standards, and pass strict factory quality inspection, with a one-year warranty period (excluding man-made damage and wearing parts).

• Supply Capacity Standard: Choose suppliers with stable supply capacity and sufficient inventory, especially for emergency spare parts, to ensure that the spare parts can be delivered in time when you need them. We have a large inventory of ZJ90DBS drilling rig spare parts, which can meet the needs of routine maintenance, periodic overhaul and emergency repair.

• Technical & After-Sales Standard: Choose suppliers that can provide professional technical support and after-sales service, such as technical consultation, on-site maintenance guidance, spare part maintenance suggestions, etc. Our team has many years of experience in ZJ90DBS drilling rig spare parts technology and after-sales service, and can provide one-stop technical support.

10.2 Call to Action

If you are looking for a reliable supplier of ZJ90DBS drilling rig spare parts, we are your best choice. We supply all spare parts listed in your demand, covering all core systems of ZJ90DBS drilling rigs, including structural components, winch and mud pump parts, BOP parts, electrical parts and auxiliary parts, and can provide customized spare parts supporting solutions according to your actual maintenance and procurement needs.

We are committed to providing you with 100% genuine spare parts, competitive prices, stable supply and professional technical support and after-sales service, helping you reduce procurement costs, improve drilling rig operation efficiency, reduce maintenance costs and ensure the safe and continuous operation of ZJ90DBS drilling rigs. Whether you need bulk procurement for new rig commissioning, routine maintenance spare parts, emergency replacement parts, or technical consultation on spare parts use and maintenance, we can provide you with professional, efficient and reliable services.

Contact us now to provide your required spare part model, drilling rig operation status or specific procurement needs, and our professional team will reply to you within 24 hours, provide detailed product quotes, technical parameters and procurement suggestions, and help you complete the procurement smoothly. We look forward to cooperating with you and becoming your long-term and reliable supplier of ZJ90DBS drilling rig spare parts!

contact us ：

Emeil: [email protected]   whatsapp: +86 15275658619

Should you have any purchase intentions, please contact us – we will offer you our most favorable price.