TPQ330-04-00, 30123290-1000, 3NB-1000F and More

Introduction

This document focuses on a full range of high-performance oilfield equipment parts, including key models such as Air separator tank TPQ330-04-00 30″, HIGH PRESSURE WASH PIPE ASSY 30123290-1000, Hydraulic Box (for Mud Pump) 3NB-1000F NB800G.05.01.00, and FRONT STEEL PLATE SPRING ASSEMBLY 5001200001 for XJ350 WORKOVER RIG. These parts are specifically designed to fit well-known oilfield equipment models, including XJ350 workover rigs, 3NB-1000F mud pumps, 2FZ85M blowout preventers, and CM252A mud recorders. Our target users cover oilfield operation companies, drilling and workover teams, equipment maintenance departments, and spare parts procurement units. The core purpose of these parts is to solve common pain points in oilfield operations—such as frequent equipment failures, short service life, poor compatibility, and high maintenance costs—by providing precise-matching, durable, and high-reliability components that ensure the stable, safe, and efficient operation of oilfield equipment. All parts comply with international standards such as API Spec 7HU2 and ISO9001, and have passed strict quality testing with exclusive performance data to support their reliability in harsh oilfield environments.

Product Overview

Core Product Portfolio

Our product range covers key components for oilfield drilling, workover, mud circulation, and hydraulic control systems, including air separator tanks, steel plate spring assemblies, high-pressure wash pipe assemblies, hydraulic boxes, solenoid valves, seals, and fasteners. Each part is manufactured with precision to match the original equipment specifications, ensuring seamless replacement and long-term stable operation. We focus on solving practical problems for users: the TPQ330-04-00 30″ air separator tank effectively removes moisture and impurities from compressed air, preventing corrosion of pneumatic components; the 30123290-1000 high-pressure wash pipe assembly resists high pressure up to 15000psi, avoiding leakage and damage in mud circulation systems; the 3NB-1000F hydraulic box ensures stable hydraulic pressure supply for mud pumps, reducing downtime caused by hydraulic failures.

Key Function Description

Each part is engineered to perform specific critical functions, directly affecting the overall efficiency and safety of oilfield equipment:

• Air separator tank TPQ330-04-00 30″: Separates moisture, oil droplets, and solid impurities from compressed air, with a separation efficiency of 99.2%, ensuring clean air supply to pneumatic tools and preventing component corrosion. It has a maximum working pressure of 1.6MPa and a capacity of 500L, suitable for large-scale oilfield air supply systems.

• FRONT STEEL PLATE SPRING ASSEMBLY 5001200001 (for XJ350 WORKOVER RIG): Absorbs vibration and impact during workover operations, with a load-bearing capacity of 12000kg and a fatigue life of 8000 working hours, reducing equipment wear and improving operational stability.

• 30123290-1000 WASH PIPE ASSY (HIGH PRESSURE): Withstands high pressure up to 15000psi and high temperature up to 120℃, ensuring smooth mud circulation and preventing pipe blockage or leakage. It takes less than 10 minutes to replace the seal rings, improving maintenance efficiency.

• Hydraulic Box (for Mud Pump) 3NB-1000F NB800G.05.01.00: Provides stable hydraulic pressure (0-35MPa) for mud pumps, with a pressure fluctuation range of less than ±0.5MPa, ensuring consistent pump displacement and reducing hydraulic component failures.

Structural Features

Our parts adopt advanced structural design and high-quality materials to adapt to harsh oilfield conditions, with the following key features:

• Durable Materials: High-strength carbon steel, stainless steel, and composite ceramic materials are used, with corrosion resistance meeting NACE MR0175 standards. For example, the 30123290-1000 wash pipe assembly uses patented composite ceramic seals, which extend the service life to 2000 working hours, 5 times longer than traditional seals.

• Precision Manufacturing: Machining accuracy reaches ±0.01mm, ensuring perfect compatibility with original equipment. The Retaining Ring (GB894.1-86 TQ340-235) is manufactured with precision stamping technology, with a dimensional error of less than 0.02mm, avoiding installation difficulties.

• Sealing Performance: Advanced sealing structures (such as O-Ring GH3161-22.06(G) and Sleeve seal AN33001-05.04) are adopted, with a leakage rate of less than 0.01ml/min, preventing fluid leakage and ensuring operational safety.

• Easy Maintenance: The design is optimized for easy disassembly and replacement. For example, the Link angling cylinder assy (2.3.02.001) has a modular structure, allowing maintenance personnel to replace damaged parts in 30 minutes or less.

Applicable Working Conditions

Our oilfield equipment parts are designed to adapt to various harsh oilfield working environments, including:

• High-Temperature and High-Pressure Environments: Suitable for oil wells with downhole temperature up to 150℃ and pressure up to 15000psi, such as the CM252A mud recorder (standard configuration 10000~15000psi) and high-pressure wash pipe assembly.

• Corrosive Environments: Resistant to acid-base mud, saltwater, and other corrosive media, suitable for offshore and onshore oilfields with high salinity, such as the SOLENOID VALVE 127908-D2 and ROD SEALS 108894-G20.

• High-Vibration Environments: With strong vibration resistance, suitable for drilling and workover rigs operating in desert, mountain, and other harsh areas, such as the FRONT STEEL PLATE SPRING ASSEMBLY 5001200001 and Right Roller 124539.

• Continuous Operation Scenarios: Designed for 24/7 continuous operation, with a failure rate of less than 0.3% per 1000 working hours, ensuring uninterrupted oilfield production.

Maintenance and Care Recommendations

To extend the service life of the parts and ensure optimal performance, our senior oilfield maintenance engineers provide the following practical suggestions (with pitfall warnings):

• Regular Inspection: Check seals (such as O-Ring 51300-277-B and 51300-273-B) every 300 working hours for wear or damage; replace them immediately if cracks or deformation are found. Pitfall Warning: Do not reuse worn seals, as this will cause fluid leakage and damage to hydraulic or pneumatic components.

• Lubrication Maintenance: Apply high-temperature resistant lubricating grease (model: 32# lithium-based grease) to moving parts such as the Right Roller 124539 and Jaw Roller 100107-001 every 500 working hours. The lubrication amount should be 2/3 of the bearing cavity, avoiding excessive lubrication which may cause overheating.

• Cleaning Requirements: Clean the air separator tank TPQ330-04-00 30″ every 1000 working hours to remove sediment and impurities; use neutral cleaning agents to avoid corrosion of the tank body. Engineer Tip: Clean the filter screen at the same time to ensure unobstructed air flow.

• Storage Conditions: Store spare parts in a dry, ventilated warehouse with a temperature of 5-30℃ and relative humidity less than 60%; avoid direct sunlight and contact with corrosive substances. For example, ASPHALT FELT WG34A.0-01 should be stored in a moisture-proof package to prevent moisture absorption and aging.

We supply the following spare parts:

On-Site Fault Maintenance Cases

The following are 4 real on-site maintenance cases, showing how our parts solve practical faults and gain customer recognition:

Case 1: Mud Pump Hydraulic Failure in Daqing Oilfield

Location: Daqing Oilfield No. 3 Oil Production Plant; Equipment Model: 3NB-1000F mud pump; Load: 8000kg; Fault: Hydraulic pressure fluctuation (fluctuation range ±2MPa), causing unstable pump displacement. Our solution: Replace the Hydraulic Box 3NB-1000F NB800G.05.01.00. After repair: Hydraulic pressure fluctuation is controlled within ±0.5MPa, pump displacement is stable at 120m³/h, and the equipment has been operating stably for 1200 working hours. Customer Feedback: "The hydraulic box fits perfectly, and the failure has not recurred, greatly improving production efficiency."

Case 2: Workover Rig Vibration Fault in Changqing Oilfield

Location: Changqing Oilfield No. 2 Oil Production Plant, Gansu Qingyang; Equipment Model: XJ350 workover rig; Load: 10000kg; Fault: Severe vibration during operation, leading to loosening of connecting bolts and shortened service life of components. Our solution: Replace the FRONT STEEL PLATE SPRING ASSEMBLY 5001200001. After repair: Vibration amplitude is reduced from 5mm to 1.2mm, bolt loosening is eliminated, and the service life of related components is extended by 6000 working hours. Customer Feedback: "The vibration problem is completely solved, and maintenance frequency is reduced by half."

Case 3: High-Pressure Wash Pipe Leakage in Shengli Oilfield

Location: Shengli Oilfield Offshore Oil Production Platform; Equipment Model: TDS top drive; Load: High pressure 12000psi; Fault: 30123290-1000 wash pipe assembly leakage, leading to mud loss and production suspension. Our solution: Replace the wash pipe assembly with our high-pressure resistant model. After repair: No leakage occurs under 15000psi high pressure, mud circulation is smooth, and the service life reaches 2000 working hours. Customer Feedback: "The product is durable and resistant to high pressure, which is very suitable for offshore harsh environments."

Case 4: Solenoid Valve Failure in Liaohe Oilfield

Location: Liaohe Oilfield Heavy Oil Production Area; Equipment Model: 2FZ85M blowout preventer; Load: 24V DC, 5A; Fault: SOLENOID VALVE 127908-D2 failure, unable to control the blowout preventer switch, posing safety risks. Our solution: Replace the solenoid valve with our 2-position, 24V DC model. After repair: The valve response time is 0.2s, switch is accurate and reliable, and it has passed 10000 switching tests without failure. Customer Feedback: "The solenoid valve is stable and reliable, ensuring the safety of well control operations."

FAQ (Frequently Asked Questions)

Procurement Guide

We provide a full range of high-quality oilfield equipment parts, including all models listed in this document (TPQ330-04-00, 30123290-1000, 3NB-1000F, 5001200001, etc.). All parts are manufactured with strict quality control, supported by exclusive performance data, on-site maintenance cases, and professional technical support. We adhere to the principle of "quality first, customer-oriented", providing you with cost-effective products that solve practical pain points in oilfield operations. Whether you need spare parts for daily maintenance, emergency replacement, or batch procurement, we can meet your personalized needs. Contact us to learn more about product specifications, pricing, and procurement details, and let us provide reliable support for your oilfield production.

contact us ：

Emeil: [email protected]  

whatsapp: +86 15275658619