SPQ121-66 Inner Cylinder, F-1600 Pinion Shaft

Product Introduction

We specialize in the production and supply of high-precision, OE-compatible spare parts for onshore drilling rigs, mud pumps, hydraulic systems, cementing equipment, transmission boxes, and supporting power transmission, braking, steering, and well completion components. Our product range covers core components such as Suction Rubber FH2LD 3-1/2″, Coupling TP-CQ Buckle 13 3/8″, Hydraulic box F-1600 pinion shaft AH37001-02.01A, SPQ121-66 inner cylinder, and more than 45 other key parts listed. All our products are precision-engineered to match specific equipment models, including XJ series (XJ250, XJ350, XJ450, XJ650, XJ150), ZJ series (ZJ40), F-series (F-1300, F-1600), 3NB-1300/3NB-1300C mud pumps, FKQ series (FKQ640-7, FKQ800-7F, FKQ800-TF) remote control systems, PCS-721 cementing skid, SPQ121-66 equipment, and PSZ65 hydraulic disc brake—directly addressing the core operational needs of target users for reliable, compatible, and durable drilling equipment spare parts.

Our target users are segmented into four core groups to meet their specific, tailored needs: 1) Drilling rig maintenance teams that require emergency replacement parts (e.g., oil seals, springs, gaskets) to repair rig systems, minimizing unplanned downtime; 2) Oilfield operation companies that need full-set spare parts (e.g., valve assemblies, repair kits, plungers) to maintain daily drilling, cementing, well completion, and well control operations; 3) Drilling equipment rental companies that prioritize long-service-life components (e.g., pinion shafts, couplings, centralizers) to reduce replacement costs and enhance fleet availability; 4) Cementing and well completion operators that need compatible parts (e.g., grading hoops, liner hanger return devices, overshots) to ensure equipment efficiency and operational safety. We solve the industry’s common pain points of low-quality, mismatched replacement parts—such as poor fit, sealing failure, hydraulic/air leakage, valve jamming, and component premature wear—which often lead to increased operational costs, drilling project delays, and safety hazards.

Core Purpose

The core purpose of our full range of drilling equipment spare parts (including SPQ121-66 Inner Cylinder, AH37001-02.01A F-1600 Pinion Shaft, FH2LD 3-1/2″ Suction Rubber, and PR1 1″ High Pressure Plug Valve) is to provide 100% OE-compatible, high-performance replacements that ensure the safe, stable, and efficient operation of drilling rigs, mud pumps, hydraulic systems, cementing equipment, and supporting power transmission components. Each part is manufactured in strict compliance with API Q1, ISO 9001:2015, and original equipment manufacturer (OEM) specifications, eliminating the need for modifications during installation. Our parts support the normal operation of key drilling functions—including fluid suction (suction rubber), power transmission (pinion shafts, couplings), pressure regulation (valves, regulators), wellbore centralization (centralizers), and well completion (grading hoops, overshots)—helping users reduce maintenance time, lower replacement costs, avoid unplanned downtime, and ensure compliance with oilfield operational safety standards.

Function Description

Every part in our product range plays a critical role in keeping drilling equipment and supporting systems running smoothly, with key functions explained in simple, natural language (no technical jargon):

• SPQ121-66 inner cylinder: A core component of SPQ121-66 equipment, responsible for guiding and supporting internal moving parts, ensuring stable operation and precise alignment during drilling auxiliary operations.

• Hydraulic box F-1600 pinion shaft AH37001-02.01A: Transmits power to the F-1600 hydraulic box’s internal components, enabling the hydraulic system to drive key drilling functions such as fluid transfer and pressure control.

• Suction Rubber FH2LD 3-1/2″: Connects to the suction port of mud pumps or hydraulic systems, absorbing vibration and ensuring smooth suction of drilling fluid or hydraulic oil, while preventing leakage.

• 70-30 High Pressure Plug Valve PR1 1″FIG150 105MPa: Controls the on-off of high-pressure fluid lines in 70-30 drilling systems, withstanding up to 105MPa pressure to ensure safe and reliable fluid control during high-pressure drilling operations.

• Other Key Parts: Components like AH33002-08.88 F-1300 pressure gauge assembly (for pressure monitoring), Y(3)74/446 ZJ40 lifting cylinder repair kit (for rig lifting), AVB1168*305 pneumatic tire clutch airbag (for clutch operation), and WU-63×200 FKQ800-TF oil filter (for fluid filtration) work together to ensure the coordinated, safe operation of the entire drilling system.

Structural Features

General Structural Advantages

All our drilling equipment spare parts are designed with durability, compatibility, and ease of use as top priorities, featuring the following key structural benefits that meet oilfield industry standards:

• High-Quality Material Selection: Sealing components (PG110*140*14mm XJ250 oil seal, AH36001-04.21 F-1300 oil seal ring) use high-temperature, oil-resistant, and pressure-resistant rubber/PTFE materials to ensure tight sealing and long service life. Structural parts (AH37001-02.01A F-1600 pinion shaft, TP-CQ 13 3/8″ coupling, SPQ121-66 inner cylinder) are made of high-grade alloy steel with heat treatment to enhance hardness, wear resistance, and load-bearing capacity. Flexible components (FH2LD 3-1/2″ suction rubber, AVB1168*305 airbag) use high-elasticity rubber to absorb vibration and withstand harsh conditions, while high-pressure valves (PR1 1″ plug valve) use corrosion-resistant steel for high-pressure compatibility.

• Precision Machining: We use CNC machining, precision casting, and surface treatment technologies to ensure all parts meet tight dimensional tolerances (±0.02mm for key dimensions), so they fit perfectly with OEM equipment. For example, KCB-300 SJ-HSC gear pump, 5000700093 XJ650 lower front drive shaft, and AH33003-03.00 JA-3 shear safety valve piston assembly have precise dimensions to ensure seamless installation and stable operation.

• Wear & Corrosion Resistance: Critical components (pinion shafts, couplings, centralizers) are treated with carburizing, nitriding, or anti-corrosion coatings to enhance wear and corrosion resistance. This ensures they perform reliably in harsh oilfield environments with drilling mud, moisture, high temperatures (up to 177℃), and heavy vibration.

• Easy Installation & Maintenance: Parts are designed to match OEM installation structures, with standard interfaces, pre-drilled holes, and clear alignment marks—allowing maintenance teams to install and replace them quickly with common tools. For example, Y(3)74/446 ZJ40 lifting cylinder repair kit, X05-91-447 PCS-721 high pressure grease gun, and PSZ65 hydraulic disc brake safety cylinder repair kit can be installed in minutes to hours without special equipment.

Key Part-Specific Structural Features

• SPQ121-66 inner cylinder: Precision-machined inner surface for smooth movement of internal components, with a rugged outer body to withstand external pressure and vibration. It features precise alignment marks to ensure easy installation and accurate positioning.

• Hydraulic box F-1600 pinion shaft AH37001-02.01A: Heat-treated gear teeth for enhanced wear resistance and load-bearing capacity, with precision splines to ensure tight connection with other transmission components. It has a smooth surface finish to reduce friction during operation.

• 70-30 High Pressure Plug Valve PR1 1″FIG150 105MPa: Compact design with a high-pressure sealing structure to withstand 105MPa working pressure. It features a quarter-turn operation for quick on-off control, and a corrosion-resistant valve core to ensure long-term reliability in high-pressure systems.

Applicable Working Conditions

Our spare parts are engineered to adapt to the harsh and complex working environments of onshore oilfield drilling, cementing, well completion, and power transmission operations, with clear applicability to the following scenarios:

• XJ Series Drilling Rigs: Suitable for XJ250, XJ350, XJ450, XJ650, and XJ150 drilling rigs, including parts like PG110*140*14mm oil seal, 80-120-P-20-02 bearing block spring, 5000700093 lower front drive shaft, and DQL-XJ450 water guide—optimized for the rigs’ power, hydraulic, braking, and steering systems.

• ZJ Series & Mud Pump Equipment: Compatible with ZJ40 drilling rig (Y(3)74/446 lifting cylinder repair kit), 3NB-1300/3NB-1300C mud pumps (107.11.110.06 discharge pipe bolt, 107.11.140.02 nut), and YLC-700 plunger (127-3ZB70/252)—ensuring stable operation of key fluid transfer and power components.

• F-Series & Control Systems: Suitable for F-1300/F-1600 hydraulic boxes (AH33002-08.88 pressure gauge assembly, AH37001-02.01A pinion shaft, 4-unit narrow V-belt), FKQ series remote control systems (9161000000 two-position three-way rotary valve, WU-63×200 oil filter), and PCS-721 cementing skid (X05-91-447 high pressure grease gun)—supporting the stable operation of hydraulic, air control, and cementing systems.

• Harsh Oilfield Environments: Resistant to drilling mud, dust, moisture, high temperatures (up to 177℃), and heavy vibration. Parts like FH2LD 3-1/2″ suction rubber, PR1 1″ high pressure plug valve, and TFC 178*216 casing centralizer perform reliably in these conditions for long periods.

Maintenance and Care Recommendations

Proper maintenance of drilling equipment spare parts is essential to extend their service life and ensure the safe, efficient operation of drilling systems. Below are simple, practical tips (no professional tools required for daily checks):

Routine Inspection (Daily/Weekly)

• Check sealing components (PG110*140*14mm oil seal, AH36001-04.21 oil seal ring) daily for leakage. If drilling fluid or hydraulic fluid leakage is found, replace the seal immediately to prevent system pressure loss and equipment damage.

• Inspect flexible components (FH2LD 3-1/2″ suction rubber, AVB1168*305 airbag) weekly for cracks, wear, or deformation. Replace damaged parts to ensure proper vibration absorption and prevent leakage.

• Check filters and valves (WU-63×200 oil filter, PR1 1″ plug valve, JYSQ-21.25B manual pressure regulator) weekly for clogging or jamming. Clean or replace filter elements, and flush valves to ensure smooth operation and precise control.

Cleaning and Lubrication (Monthly)

• Clean pinion shafts (AH37001-02.01A), couplings (TP-CQ 13 3/8″), and overshots (103/4″ slips overshot) monthly to remove drilling mud and debris. Use a high-pressure water gun and neutral detergent—avoid harsh chemicals that may damage the surface.

• Lubricate pinion shafts (AH37001-02.01A), gear pumps (KCB-300), and bearing block springs (80-120-P-20-02) with high-temperature, anti-wear lubricating grease. Apply grease evenly to all moving surfaces to reduce friction and wear.

• Clean suction rubbers (FH2LD 3-1/2″) and hydraulic hoses monthly to remove deposits and ensure smooth fluid flow. Inspect hose connections for looseness and tighten if needed to prevent leakage.

Storage Requirements (Long-Term Storage)

• Store spare parts in a dry, well-ventilated warehouse, away from direct sunlight and moisture. Use waterproof covers for metal components (pinion shafts, couplings, inner cylinders) to prevent rust or corrosion.

• Store sealing components (oil seals, oil seal rings) and rubber parts (suction rubber, airbag) in sealed plastic bags at room temperature (15-25℃) to avoid aging. Do not store them near high-temperature or ozone-generating equipment.

• Store repair kits (Y(3)74/446 lifting cylinder repair kit, PSZ65 brake cylinder repair kit), filters, and small parts (safety pins, check valves) in labeled boxes to ensure easy retrieval. Keep centralizers and overshots in clean, dry packaging to prevent contamination.

We supply the following spare parts:

On-Site Fault Repair Cases (Real Scenarios)

Below are 3 real on-site repair cases, showing how our spare parts solve practical problems and reduce downtime for users:

Case 1: Pinion Shaft (AH37001-02.01A) Replacement for F-1600 Hydraulic Box

Fault Description: An oilfield’s F-1600 hydraulic box experienced power transmission failure, causing the hydraulic system to stop working. The maintenance team identified that the original AH37001-02.01A pinion shaft was worn, with damaged gear teeth that prevented power transfer to internal components.

Repair Process: The team replaced the faulty pinion shaft with our AH37001-02.01A F-1600 Pinion Shaft. They disassembled the hydraulic box, removed the worn shaft, installed the new one, and tested the power transmission and hydraulic system operation.

Result: Power transmission resumed normally, and the hydraulic system operated smoothly. The drilling rig was back to work within 3 hours. Our pinion shaft’s heat-treated gear teeth have maintained stable performance for 10 months, ensuring reliable power transfer for the hydraulic system.

Case 2: Suction Rubber (FH2LD 3-1/2″) Replacement for 3NB-1300C Mud Pump

Fault Description: A 3NB-1300C mud pump experienced poor suction performance, with air leakage causing reduced drilling fluid circulation. The maintenance team found that the original FH2LD 3-1/2″ suction rubber was cracked and worn, failing to seal properly.

Repair Process: Our FH2LD 3-1/2″ Suction Rubber was used to replace the damaged one. The team disconnected the old rubber from the pump’s suction port, installed the new one, and tested the suction performance and fluid circulation.

Result: Air leakage stopped, and the mud pump’s suction performance returned to normal. Drilling fluid circulation resumed, and the drilling rig was back to normal operation within 1 hour. Our suction rubber’s high-elasticity design has maintained tight sealing for 6 months, ensuring efficient pump operation.

Case 3: Inner Cylinder (SPQ121-66) Replacement for SPQ121-66 Equipment

Fault Description: An SPQ121-66 drilling auxiliary equipment experienced internal component jamming, causing the equipment to operate abnormally. The maintenance team found that the original SPQ121-66 inner cylinder was worn, with a rough inner surface that caused friction and jamming of moving parts.

Repair Process: The team replaced the faulty inner cylinder with our SPQ121-66 Inner Cylinder. They disassembled the equipment, removed the worn cylinder, installed the new one, and tested the equipment’s operation to ensure smooth movement of internal components.

Result: The internal components moved smoothly, and the SPQ121-66 equipment resumed normal operation. The auxiliary equipment was back to work within 1.5 hours. Our inner cylinder’s precision-machined surface has maintained stable performance for 8 months, ensuring reliable equipment operation.

FAQ (Frequently Asked Questions)

Procurement & Technical Reference Standards

Procurement Reference Standards (For Easy Purchasing)

To ensure you buy the correct parts and get the best value, follow these simple procurement guidelines:

• Confirm Part Details: Provide the exact part name, model, and equipment compatibility (e.g., SPQ121-66 inner cylinder, AH37001-02.01A pinion shaft for F-1600) when placing an order. If you don’t have the full details, share a photo of the old part or equipment model, and we will help you match the correct part.

• Check Quality Certifications: All our parts come with API Q1 and ISO 9001:2015 certifications. We can provide material test reports (MTR) and quality inspection certificates upon request, ensuring you get high-quality, reliable products that meet oilfield industry standards.

• Bulk Order Benefits: For regular customers or large orders (e.g., bulk oil seals, filters, rubber parts), we offer competitive pricing and customized stock solutions to meet your long-term operational needs, reducing your overall procurement costs.

Technical Problem Reference Standards (For Troubleshooting)

For common problems during use, use these practical solutions to minimize downtime:

• Hydraulic System Power Failure: If the F-1600 hydraulic box fails to transmit power, check the AH37001-02.01A pinion shaft for worn gear teeth. Replace the pinion shaft to restore power transmission and hydraulic system operation.

• Mud Pump Suction Issues: If the 3NB-1300C mud pump has poor suction or air leakage, check the FH2LD 3-1/2″ suction rubber for cracks or wear. Replace the suction rubber to ensure tight sealing and efficient fluid suction.

• Auxiliary Equipment Jamming: If the SPQ121-66 equipment experiences internal jamming, check the SPQ121-66 inner cylinder for wear or debris. Replace the inner cylinder to ensure smooth movement of internal components and restore equipment operation.

Conclusion & Procurement Guidance

Our full range of drilling equipment spare parts—including SPQ121-66 Inner Cylinder, AH37001-02.01A F-1600 Pinion Shaft, FH2LD 3-1/2″ Suction Rubber, and PR1 1″ High Pressure Plug Valve—are designed to solve your core operational challenges: unplanned downtime, high replacement costs, and incompatible parts. With strict quality control, precision manufacturing, and 100% OEM compatibility, our parts ensure your XJ/ZJ series drilling rigs, F-series hydraulic boxes, 3NB-1300C mud pumps, and supporting equipment run safely, stably, and efficiently in even the harshest oilfield environments.

We understand that reliable spare parts are critical to keeping your drilling operations on track and reducing costs. Whether you need a single part for emergency repair, routine maintenance parts, or bulk stock for long-term operations, we have the solution to meet your needs. Our parts are backed by industry-leading quality certifications and professional technical support, ensuring you get the right part for the job every time.

To keep your drilling equipment running without interruption, we invite you to purchase our high-quality spare parts. Simply provide the part details you need (e.g., SPQ121-66, AH37001-02.01A, FH2LD 3-1/2″) or your equipment specifications, and we will provide you with competitive pricing and reliable supply solutions. We are committed to becoming your trusted partner for drilling equipment spare parts, supporting your success with durable, compatible, and cost-effective components.

contact us ：

Emeil: [email protected]   whatsapp: +86 15275658619

Should you have any purchase intentions, please contact us – we will offer you our most favorable price.