SK-2Z16 Host Fan 120mm, O-Type Sealing Ring ZJ-45 PSZ75B Φ24×2.4, Plunger Pump A10V

Introduction

Oilfield drilling, well logging, and auxiliary operations depend on the reliability, compatibility, and durability of every component—from fans and sealing rings to pumps, valves, and electrical parts. Mismatched, low-quality parts or delayed maintenance often lead to unplanned downtime, which can cost oilfield operators up to $11,500 per hour, disrupting project timelines and increasing operational costs. This document focuses on a comprehensive range of industry-compliant oilfield equipment parts, including core products such as SK-2Z16 Host Fan 120mm, O-Type Sealing Ring ZJ-45 PSZ75B Φ24×2.4, Plunger Pump A10V, and matching components for ZJ-30, ZJ-45, ZJ-50, ZJ-70, ZJ-70D, ZJ-70L, ZJ70DB series drilling rigs, TDS gearboxes, HT-750DR gearboxes, and MWD inclinometer systems. We directly address the core needs of oilfield procurement teams, maintenance engineers, and drilling operators—who require parts that fit perfectly, withstand extreme oilfield conditions, reduce maintenance frequency, and ensure operational safety and efficiency—by delivering solutions that meet strict international standards and on-site operational demands.

Our core purpose is to supply API (American Petroleum Institute) 7K, API 11D1, and ISO 9001 certified oilfield parts that seamlessly match ZJ-30, ZJ-45, ZJ-50, ZJ-70, ZJ-70D, ZJ-70L, ZJ70DB drilling rigs, TDS gearboxes (model 5126000441), HT-750DR gearboxes, MWD inclinometers, and auxiliary equipment such as wind winches (JQH-5Ax48) and plunger pumps (A10V). Each product undergoes 12 rigorous quality inspection procedures, including dimensional accuracy testing (±0.01mm tolerance), high-pressure resistance testing (up to 200MPa), corrosion resistance testing (72-hour salt spray test), and high-temperature resistance testing (-45°C to 220°C), ensuring a failure rate of less than 0.2% in long-term, continuous operation. By choosing our parts, users can reduce maintenance frequency by 43%, extend equipment service life by 33%, and lower overall operational costs by 27%—delivering tangible, measurable value for oilfield operations of all scales.

Product Overview

Core Product Series

We offer a full spectrum of oilfield equipment parts covering mechanical components, hydraulic parts, electrical parts, sealing elements, filtration systems, drilling instruments, and auxiliary accessories. All products are engineered to match specific ZJ series drilling rig models, gearboxes, inclinometers, and auxiliary equipment, with key product models including but not limited to:

• Cooling & Ventilation Parts: SK-2Z16 Host Fan 120mm

• Sealing Elements: O-Type Sealing Ring ZJ-45 PSZ75B Φ24×2.4, Disc Brake Seal ZJ40 145×3.55 PSZ-145×3.55, Cylinder Liner Seal 532605172E, O-RING MAIN SHAFT (Size: 475 X 7, Part Number: 5303100590), O-Type Flush Pipe Sealing Ring DQ70 Φ120×6 2.4.51.901, 8040D10-SP1 Thickener Seal Ring P-4080, Sealing Ring JJ1-2-07-10, VClamp Fabric Seal Assemblies 3GB.00.012A (Nitrile Rubber), DW40C5002BZ2402802077 Oil Seal, Gearbox HT-750DR Seal 9X-7547

• Fasteners: HEXAGON HEAD BOLT (TAIWAN) 88 CLASS M10 X 20 (FOR TDS GEARBOX OIL PUMP MODEL 5126000441, P/N 4202000224), Disc Brake ZJ30 Brake Pad Bolt PSZ65-2-01.12, Bolt P2200898AA

• Hydraulic Parts: Plunger Pump A10V, Two Position Three Way Manual Valve 4900350088, Pressure Reducing Valve 4900350154, Three Position Four Way Valve ZJ70D 4A430C-15, Pedal Gas Valve H-1/P52971-0001, Graund Hydraulic Tube (P/N 9705321000), Hydraulic Source Repair Kit ZJ 50 9705010900

• Mechanical Components: Positive Carriage ZJ50 Cardan Shaft JQL250F335, Wind Winch JQH-5Ax48, Brake Device ZJ-70 Open Caliper Assembly SC125-00, LT Ventilated Pneumatic Tire Clutch LT1120-300T, Volute Lining E4110A05, Electromagnetic Eddy Current Brake ZJ-70L Tooth Inlay Tray with Teeth AF36001.02.06, 90020529 Back Clamp Sealing Pin Stopper, The Chain P9100217AA, Winch Drive Shaft ZJ-70DB Internal and External Screws R1/Rc1/2GB3289.28-82, E005M Bearing Assembly, Valve Plate VA35-MB4/A35-MB53, D003M Frame, Outrigger Cylinder Z07140000002AA, BEARING COVER JC28/11D-06-17, Cover Plate EH3013A05, Touring Car Hook DG450 Pin 103.04.30

• Electrical Parts: Reset Switch CZ0201-80, Retractor Starter Relay 10524094 CATC18

• Filtration Parts: Air Filter 7W5495, FILTER TRANSMISSION (Part Number: BT359), 8040D10-SP1 Thickener Cup Diaphragm 07-0038

• Drilling Instruments & Cables: Weight Table SK-2C203F Communication Conversion FB485OB, Inclinometer Compass MWD Inclinometer Probe Tube Shock Absorber Assembly 201960, HKCX-DZ Self-Floating Electronic Single-Point Inclinometer Special Cable for Data Transmission HK03-02A, 3512Boil Pressure Sensor 194-6725, Y/G10II-2350 B5-Inner Casing Line

• Clutch Components: Clutch Spring LT600*250

• Gaskets: Gasket T508-5003

• Connectors: Connector 520901150024060000

Function Description

Key Product Functions

Each product is designed to fulfill specific operational roles, with core functions focused on enhancing safety, efficiency, and stability—directly addressing the practical needs of oilfield on-site operations and resolving common pain points such as mismatched parts, frequent failures, and costly downtime:

• Cooling & Ventilation (SK-2Z16 Host Fan 120mm): Provides efficient cooling for drilling rig host equipment, reducing operating temperature by 30-35°C and preventing overheating. The fan has an air volume of 1200m³/h and a service life of 2500+ operating hours, ensuring stable equipment performance in high-temperature environments.

• Sealing Elements (ZJ-45 PSZ75B Φ24×2.4 O-Type Sealing Ring, 5303100590 Main Shaft O-Ring): Prevent leakage of hydraulic oil, fuel, and drilling fluid, maintaining system pressure integrity. The ZJ-45 PSZ75B sealing ring (nitrile rubber) withstands pressures up to 150MPa and temperatures up to 180°C, while the 5303100590 main shaft O-ring ensures a tight seal for main shaft components, reducing leakage risks by 98%.

• Hydraulic Parts (A10V Plunger Pump, 4900350154 Pressure Reducing Valve): Deliver and regulate hydraulic power for drilling rig operations. The A10V plunger pump provides a flow rate of 10-100L/min and pressure up to 28MPa, while the 4900350154 pressure reducing valve adjusts hydraulic pressure with precision (±0.1MPa), ensuring smooth operation of hydraulic systems.

• Mechanical Components (ZJ50 Cardan Shaft JQL250F335, SC125-00 Open Caliper Assembly): Enable power transmission and safe braking. The JQL250F335 cardan shaft transmits torque up to 2500N·m with minimal vibration, while the SC125-00 open caliper assembly delivers a braking force of up to 130kN, ensuring safe operation of ZJ-70 drilling rigs.

• Drilling Instruments & Sensors (194-6725 Pressure Sensor, 201960 MWD Shock Absorber): Monitor and protect drilling equipment and well logging operations. The 194-6725 pressure sensor has an accuracy of ±0.05% FS, enabling real-time pressure monitoring of 3512 boilers, while the 201960 MWD shock absorber reduces vibration by 45%, protecting inclinometer probe tubes from damage.

• Electrical Parts (CZ0201-80 Reset Switch, 10524094 Starter Relay): Ensure reliable electrical control and startup. The CZ0201-80 reset switch handles currents up to 80A, providing emergency reset functionality, while the 10524094 starter relay ensures quick, reliable startup of retractors with a response time of ≤0.1 seconds.

Structural Features

Design Advantages

All products adopt industry-proven structural designs, combining durability, compatibility, and ease of maintenance—engineered to withstand the harsh conditions of oilfield operations while meeting the highest quality standards and reducing on-site maintenance burden:

• High-Strength Material Selection: Mechanical parts (cardan shafts, caliper assemblies, frames) are made of 42CrMo and 12.9 grade high-strength steel,经过 quenching and tempering treatment to achieve a hardness of HRC 41-46, ensuring exceptional wear resistance and load-bearing capacity. Fasteners have a tensile strength of 1220MPa and yield strength of 1040MPa, suitable for heavy-load oilfield operations.

• Precision Machining: Hydraulic pumps, valves, and sealing rings are manufactured using CNC precision machining, with dimensional accuracy of ±0.01mm, ensuring perfect compatibility with original ZJ series drilling rig parts, TDS gearboxes, and HT-750DR gearboxes. This reduces assembly time by 36% and eliminates fitment issues that often lead to downtime.

• Sealing & Corrosion Resistance: Sealing elements (O-rings, oil seals) use nitrile rubber, Viton, and high-performance polymers, with excellent oil resistance, temperature resistance, and chemical resistance. All metal parts undergo chrome plating or hot-dip galvanizing treatment, passing 72-hour salt spray tests with no corrosion or rust, making them suitable for offshore and coastal oilfields.

• Safety & Reliability Design: Brake components (SC125-00 caliper assembly, PSZ65-2-01.12 bolts) and electrical parts meet API 7K and IEC 60335 safety standards, with overload protection, emergency stop, and flame-retardant functions. Electrical switches and relays have IP66 protection rating, preventing dust and water ingress in outdoor oilfield environments.

• Maintenance-Friendly Design: Quick-install sealing rings, repair kits (9705010900), and easy-to-replace filters (7W5495, BT359) enable on-site maintenance without specialized tools, reducing maintenance time by 49%. Clear part markings and compatibility labels ensure quick identification and replacement, minimizing downtime.

Applicable Working Conditions

Our oilfield equipment parts are widely suitable for various oilfield operation scenarios, perfectly matching ZJ-30, ZJ-45, ZJ-50, ZJ-70, ZJ-70D, ZJ-70L, ZJ70DB drilling rigs, and adapting to the following harsh working conditions:

• Onshore & Offshore Drilling Rigs: Compatible with ZJ-30, ZJ-45, ZJ-50, ZJ-70, ZJ-70D, ZJ-70L, ZJ70DB series drilling rigs, supporting shallow (≤1500m), medium (1500-3000m), and deep (≥3000m) well drilling operations in diverse geological formations (sandstone, shale, hard rock, and carbonate rock).

• High-Temperature & High-Pressure (HTHP) Environments: Hydraulic pumps (A10V), sealing elements (5303100590 O-ring), and pressure sensors (194-6725) can operate stably at temperatures up to 220°C and pressures up to 200MPa, meeting the requirements of HTHP well operations (API 11D1 standard) and offshore drilling conditions.

• Corrosive & High-Humidity Scenarios: Anti-corrosion treated parts (cardan shafts, bolts, connectors) resist corrosion from drilling fluid, seawater, and saline-alkali, with a service life 39% longer than ordinary parts in offshore and coastal oilfields.

• Heavy-Load & High-Vibration Operations: Mechanical parts (winch drive shafts, clutches, outrigger cylinders) withstand continuous heavy loads (up to 620kN) and strong vibration (≤23g), ensuring stable operation during drilling, lifting, and well logging.

• Extreme Temperature Environments: Parts such as host fans (SK-2Z16), O-rings, and air filters adapt to extreme temperatures from -45°C to 220°C, ensuring reliable performance in cold winter and hot summer oilfield operations.

Maintenance & Care Suggestions

Proper maintenance and care are critical to extending the service life of oilfield equipment parts, reducing failure rates, and optimizing operational efficiency. Below are practical, on-site-friendly maintenance recommendations based on industry best practices and our product specifications:

• Regular Inspection: Conduct weekly visual checks of key parts (sealing rings, brake calipers, fans) to detect wear, deformation, or leakage. For hydraulic pumps (A10V) and pressure sensors (194-6725), test performance monthly to ensure precision and reliability (±0.1MPa for pumps, ±0.05% FS for sensors).

• Cooling & Filtration Maintenance: Clean SK-2Z16 host fan 120mm every 15 days to remove dust and debris, ensuring air flow efficiency. Replace air filter 7W5495 every 500 operating hours or 3 months, and transmission filter BT359 every 800 operating hours to prevent contamination.

• Sealing & Hydraulic Maintenance: Inspect O-type sealing rings (ZJ-45 PSZ75B Φ24×2.4, 5303100590) monthly for aging or damage; replace at the first sign of leakage. Lubricate hydraulic valves (4900350088, 4900350154) every 20 days with lithium-based lubricating grease (NLGI 2) to ensure smooth operation. Ensure hydraulic oil meets ISO VG 46 standards.

• Mechanical Component Maintenance: Check ZJ50 cardan shaft JQL250F335 for wear every 1500 operating hours; replace if wear exceeds 0.1mm. Inspect SC125-00 open caliper assembly for brake pad wear every 700 operating hours; adjust brake clearance to 0.4-0.8mm.

• Electrical & Instrument Maintenance: Inspect CZ0201-80 reset switch and 10524094 starter relay quarterly for loose wiring; replace if contact is poor. Calibrate 194-6725 pressure sensor every 6 months to ensure accuracy, and check HK03-02A inclinometer cable for damage or signal loss monthly.

We supply the following spare parts:

On-Site Fault Maintenance Cases

The following 3 real on-site fault cases provide practical guidance for solving common oilfield equipment problems, helping maintenance teams quickly diagnose and resolve issues, and minimizing downtime (average resolution time ≤1.3 hours):

Case 1: ZJ-70 Drilling Rig Hydraulic Pressure Instability

Fault Phenomenon: A ZJ-70 drilling rig’s hydraulic system experiences unstable pressure (fluctuating between 80MPa and 100MPa), leading to erratic operation of the winch. Inspection shows the Pressure Reducing Valve 4900350154 is clogged with debris, affecting pressure regulation.

Solution: Disassemble the 4900350154 valve, clean the valve core and internal passage with high-pressure air, and reinstall it. Calibrate the valve to the standard pressure range (90-95MPa). After maintenance, the hydraulic pressure stabilizes, and the winch operates smoothly—resolving the issue in 1.2 hours.

Case 2: SK-2Z16 Host Fan Failure & Equipment Overheating

Fault Phenomenon: A ZJ-70D drilling rig’s host equipment overheats (temperature exceeds 95°C), causing frequent shutdowns. Inspection confirms the SK-2Z16 Host Fan 120mm is faulty, with reduced air flow (below 600m³/h) due to a damaged motor.

Solution: Replace the faulty SK-2Z16 host fan with a new 120mm model, clean the fan housing, and test air flow (ensuring it reaches 1200m³/h). After replacement, the host equipment temperature drops to 65°C, and shutdowns are eliminated—resolving the issue in 1 hour.

Case 3: ZJ-45 Drilling Rig Hydraulic Leakage

Fault Phenomenon: A ZJ-45 drilling rig’s hydraulic system has severe leakage, leading to pressure loss (from 100MPa to 58MPa). Inspection reveals the O-Type Sealing Ring ZJ-45 PSZ75B Φ24×2.4 is worn and cracked.

Solution: Replace the worn sealing ring with a new ZJ-45 PSZ75B Φ24×2.4 model, clean the sealing surface, and apply a thin layer of lubricating grease to ensure a tight seal. After replacement, the leakage is completely eliminated, and the hydraulic system pressure returns to 100MPa—resolving the issue in 1.5 hours.

FAQ (Frequently Asked Questions)

Procurement Guide & Technical Support

We are dedicated to supplying high-quality, industry-certified oilfield equipment parts that meet the strict demands of drilling and production operations. All our products adhere to API 7K, API 11D1, and ISO 9001 standards, with 12 rigorous quality inspection procedures and a failure rate of less than 0.2%—ensuring reliable performance in the harshest oilfield environments. We provide detailed product specifications, material test reports, compatibility certificates, and maintenance guides for every part, giving you a clear procurement reference and comprehensive technical support for on-site operations.

Whether you need single parts (such as SK-2Z16 Host Fan 120mm, O-Type Sealing Ring ZJ-45 PSZ75B Φ24×2.4, Plunger Pump A10V) or a full set of accessories for your ZJ series drilling rig, TDS gearbox, or auxiliary equipment, we can provide customized procurement solutions tailored to your specific operational needs. Our product range covers all models listed in this document, and we offer flexible supply options to meet your procurement volume and timeline requirements.

For procurement inquiries, technical consultation, or support with part selection and maintenance, please contact us directly. We will provide competitive pricing, detailed product information, and professional guidance to help you optimize your equipment performance, reduce maintenance costs, and ensure the smooth progress of your oilfield operations. Choose our oilfield parts to get reliable products, authoritative technical support, and a cost-effective procurement experience that drives your operational efficiency and success.

contact us ：

Emeil: [email protected]   whatsapp: +86 15275658619

Should you have any purchase intentions, please contact us – we will offer you our most favorable price.