Rotary Table & Control Components Supply (ZP-375, ZP275)

Product Introduction

We specialize in the production and supply of high-precision, fully compatible components for industrial rotary tables (ZP-375, ZP275) and supporting control systems, covering a comprehensive range of parts including control components, sensors, seals, bearings, fasteners, and structural parts. Our core product lineup includes key models such as ADJUSTABLE PRESSURE SWİCH 232P43C6HN, BEARING, ROTARY TABLE ZP-375, HH 2687/1049, BOWL, INSERT, 2-3/8″-8-5/8″,ROTARY TABLE ZP001.20.00, and BEARING, 1681/800, ROTARY TABLE, ZP275 1681/800. All products comply with international industrial standards, including ISO 281 for bearings, ISO 3601 for O-rings/seals, IEC 61508 for control components, and GB/T 1182 for gaskets and shims. Each component undergoes a rigorous 21-point quality inspection process, with exclusive performance data: our 232P43C6HN adjustable pressure switch has an accuracy of ±0.5% FS and a service life of 200,000 cycles, 2687/1049 rotary bearing has a dynamic load capacity of 720kN and a wear rate of 0.0012mm per 1000 working hours, and ZP001.20.00 insert bowl has a load-bearing capacity of 600kg—exceeding industry standards by 17%—ensuring perfect compatibility with ZP-375 and ZP275 rotary tables, reliable performance in harsh industrial environments, and long-term operational stability.

The core purpose of our products is to provide precise, durable, and custom-fit components for ZP-375 and ZP275 rotary tables, as well as their supporting control and hydraulic systems—addressing the critical need to prevent control component failure, seal leakage, bearing wear, and structural misalignment, which often lead to unplanned downtime, reduced machining precision, equipment damage, and high maintenance costs. Our target users are segmented into rotary table manufacturers, industrial machining plants, MRO (Maintenance, Repair, Operations) providers, and precision engineering companies that rely on ZP-375/ZP275 rotary tables for machining, drilling, and positioning operations, as well as facilities needing control and monitoring components for industrial equipment. We focus on their key pain points: difficulty sourcing compatible components for ZP-375/ZP275 models, pressure switch inaccuracy causing hydraulic system malfunctions, seal leakage leading to internal component corrosion, and bearing wear reducing rotary table stability. We prioritize value delivery by using premium, industry-certified materials—such as stainless steel for fasteners and pins, high-carbon alloy steel for bearings, nitrile rubber (NBR) for O-rings/seals, and reinforced composite materials for control components—reducing equipment downtime by 58%, cutting maintenance costs by 45%, and ensuring 100% compatibility with ZP-375 and ZP275 rotary tables, while maintaining strict compliance with ISO and IEC standards for safety and performance.

Function Description

1. Control & Monitoring Components

These components ensure precise control, monitoring, and signal transmission for rotary tables and industrial equipment. ADJUSTABLE PRESSURE SWİCH 232P43C6HN is an adjustable pressure switch, monitoring hydraulic or pneumatic system pressure in rotary tables and industrial equipment, triggering alarms or shutdowns when pressure deviates from the set range. Aerospase Controls 122P82C6N540 is a precision control valve, regulating fluid flow and pressure to ensure stable operation of rotary table hydraulic systems. Oil pressure gauge AROFLEX EPDB6-315SD displays real-time oil pressure in rotary table hydraulic systems, allowing operators to monitor system health. Inductive sensor-NCB10-30GM40-N0-15M 106283 detects the position of rotating components in ZP-375/ZP275 rotary tables, ensuring precise positioning and triggering control signals. Relay 24VAC/DC 8NO/1NC PSR-SC is a 24V AC/DC relay, switching electrical circuits to control the operation of rotary table components and supporting equipment. Signal converter NewPwr NPEXA-C311P and Signal converter NPWD-CD55D convert analog or digital signals from sensors and control components, ensuring accurate signal transmission for rotary table control systems. EM-DR1-IS-5-RTB-28 60004-003 is a safety control module, providing overload and short-circuit protection for rotary table electrical systems. Monitor 2402969 BL PPC153000HH CN BLPP3000 displays real-time operational data of rotary tables, including pressure, temperature, and position, facilitating equipment monitoring and fault diagnosis. Consistometer main card 20-101-0456 is the main control card for consistometer equipment, working with rotary tables to ensure precise material consistency measurement.

2. Sealing Components

Sealing components prevent fluid leakage and dust ingress, protecting internal components of ZP-375/ZP275 rotary tables. SEAL RING SPRING D7-1-67,180x220x15 is a spring-loaded seal ring (180x220x15mm), providing leak-proof sealing for rotary table hydraulic systems. O-RING,O TYPE,P/N D4-5-73,420×8.6, O-RING,O TYPE,P/N 105.06.20,1000×8.6, O-RING,O TYPE,P/N 105.06.15,800×8.6 are O-type O-rings with different dimensions (420×8.6mm, 1000×8.6mm, 800×8.6mm), sealing gaps between moving components. O-SEAL, DIA 800X8.6, ROTARY TABLE, ZP275 ZP275-23, O-SEAL, DIA 1000X8.6, ROTARY TABLE,ZP275 ZP275-29, O-SEAL, DIA 404X8.6, ROTARY TABLE,ZP275 ZP275-20.03, and O-SEAL, DIA 409X8.6, ROTARY TABLE, ZP275 ZP275-20.13 are O-seals for ZP275 rotary tables, with diameters ranging from 404mm to 1000mm, ensuring leak-proof sealing for hydraulic and mechanical components.

3. Bearing & Rotating Components

These components support the rotating mechanism of ZP-375 and ZP275 rotary tables, ensuring smooth and stable operation. BEARING, ROTARY TABLE ZP-375, HH 2687/1049 is a high-load rotary bearing for ZP-375 rotary tables, supporting the main rotating shaft and accommodating radial and axial loads. BEARING, 91682/800, ROTARY TABLE, ZP275 91682/800 and BEARING, 1681/800, ROTARY TABLE, ZP275 1681/800 are rotary bearings for ZP275 rotary tables, with high wear resistance and load-bearing capacity.BUSHING, MASTER, ROTARY TABLE, ZP 375 ZP001.19.00 and BUSHING, MASTER, ROTARY TABLE, ZP 275 ZP275-18D.00 are master bushings for ZP-375 and ZP275 rotary tables, reducing friction between rotating components and ensuring precise rotation. COUPLING, UNIVERSAL SHAFT, ROTARY TABLE ZP001.22 is a universal shaft coupling, transmitting torque between the motor and ZP-375 rotary table, accommodating misalignment and ensuring smooth power transmission.

4. Structural & Auxiliary Components

These components provide structural support, alignment, and operational control for ZP-375 and ZP275 rotary tables. DETENT, LEFT, ROTARY TABLE, ZP-375 ZP001.03 and DETENT, RIGHT, ROTARY TABLE, ZP-375 ZP001.04 are left and right detents for ZP-375 rotary tables, securing the rotary table in fixed positions during operation or maintenance. PIN, OPERATING LEVER,ROTARY TABLE,ZP-375 ZP001.05, PIN, HANDLE,OPERATION,ROTARY TABLE,ZP275 ZP275-03, PIN, CATCHER , ROTARY TABLE, ZP 275, HH ZP275-04, PIN, ROTARY TABLE, ZP 375, HH ZP001.10, and PIN, DETENT, ROTARY TABLE, ZP 375, HH ZP001.15 are pins for operating levers, handles, and detents, enabling smooth movement and secure retention. BOWL, INSERT, 2-3/8″-8-5/8″,ROTARY TABLE ZP001.20.00 is a 2-3/8″-8-5/8″ insert bowl for ZP-375 rotary tables, supporting workpieces during machining. WIPER, MUD, ROTARY TABLE, ZB098-TC, HH ZP001.17 is a mud wiper, removing debris and mud from rotary table components to prevent wear.

5. Gaskets, Shims & Sleeves

These components ensure precise alignment, sealing, and spacing for ZP-375 and ZP275 rotary tables. GASKET, 1265/1205, ROTARY TABLE, ZB098 ZP001.24, GASKET, 0.5, ROTARY TABLE, ZB098-TC, HH ZP001.18.05, GASKET, 0.1, ROTARY TABLE, ZB098-TC, HH ZP001.18.06, GASKET, 0.05, ROTARY TABLE, ZB098-TC, HH ZP001.18.07, GASKET, ROTARY TABLE, ZB098-TC, HH ZP001.21.05, and GASKET, ROTARY TABLE, ZB098-TC, HH ZP001.21.06 are gaskets of different thicknesses, sealing gaps between structural components to prevent leakage. SHIM, ROTARY TABLE, ZP275, SICHUAN LEJU ZP275-25, SHIM, ROTARY TABLE, ZP275, SICHUAN LEJU ZP275-26, and SHIM, DIA 426 X 520 X 0.5, ROTARY TABLE ZP275-20.06 are shims for ZP275 rotary tables, adjusting component gaps to ensure precise alignment and machining accuracy.SLEEVE, SPACER, ROTARY TABLE, ZB098-TC ZP001.21.03,SLEEVE, BEARING, ROTARY TABLE, ZB098-TC ZP001.21.04.00, and SLEEVE, SHAFT, ROTARY TABLE, ZB098-TC,HH ZP001.21.08 are sleeves for spacers, bearings, and shafts, ensuring proper spacing and alignment of components.

6. Fasteners & Retaining Components

These components secure ZP-375 and ZP275 rotary table components together, ensuring structural stability. BOLT, ROTARY TABLE, ZP 375, HH ZP001.12 and NUT, ROTARY TABLE, ZP 375, HH ZP001.13 are bolts and nuts for ZP-375 rotary tables, providing strong fastening for heavy components. RING, RETAINER, ROTARY TABLE, ZB098-TC ZP001.25 and RING, RETAINER, ROTARY TABLE, ZB098-TC ZP001.21.10 are retainer rings, securing bearings and other components in place to prevent displacement. PLUG, R1 1/2, ROTARY TABLE, ZP 375, HH ZP001.16 is an R1 1/2 plug, sealing fluid ports to prevent hydraulic or lubricating oil leakage.

Structural Features

1. Control & Monitoring Components

ADJUSTABLE PRESSURE SWİCH 232P43C6HN is made of high-strength engineering plastic and stainless steel, with an exclusive pressure adjustment range of 0.1-10MPa, accuracy of ±0.5% FS, and a service life of 200,000 cycles, suitable for harsh industrial environments. Aerospase Controls 122P82C6N540 is a precision control valve, with a flow rate of 50L/min and a pressure rating of 35MPa, ensuring stable fluid regulation. Oil pressure gauge AROFLEX EPDB6-315SD has a measuring range of 0-315bar, accuracy of ±1.6%, and a shock-resistant design to withstand industrial vibrations. Inductive sensor-NCB10-30GM40-N0-15M 106283 has a detection distance of 10-30mm, response time of ≤0.1ms, and IP67 protection level, ensuring reliable detection in dusty environments. Relay 24VAC/DC 8NO/1NC PSR-SC has a contact current of 10A, insulation resistance of ≥100MΩ, and a service life of 100,000 cycles. Signal converter NewPwr NPEXA-C311P converts 4-20mA analog signals to digital signals, with conversion accuracy of ±0.1%, ensuring precise signal transmission. Monitor 2402969 BL PPC153000HH CN BLPP3000 has a 15-inch display, resolution of 1920×1080, and real-time data refresh rate of 10Hz, facilitating clear monitoring of rotary table operations.

2. Sealing Components

SEAL RING SPRING D7-1-67,180x220x15 is made of nitrile rubber (NBR) with a stainless steel spring, shore hardness of 75±5 durometer, and a leak rate ≤0.002ml/min, ensuring effective sealing for hydraulic systems. O-rings (D4-5-73, 105.06.20, 105.06.15) are made of NBR, with excellent oil resistance and temperature resistance (-40℃ to 120℃), service life of 12,000 working hours. O-seals (ZP275-23, ZP275-29, ZP275-20.03, ZP275-20.13) are made of fluororubber (FKM), with high temperature resistance (up to 200℃) and chemical resistance, suitable for harsh hydraulic environments, and a leak rate ≤0.001ml/min.

3. Bearing & Rotating Components

BEARING, ROTARY TABLE ZP-375, HH 2687/1049 is made of 20CrMnTi alloy steel, carburized and quenched to Rockwell C 58-62, exclusive dynamic load capacity of 720kN, static load capacity of 1050kN, and a wear rate of 0.0012mm per 1000 working hours. BEARING, 1681/800, ROTARY TABLE, ZP275 1681/800 has a dynamic load capacity of 680kN, made of high-carbon alloy steel, with a sealed design to prevent dust ingress. BUSHING, MASTER, ZP001.19.00 & ZP275-18D.00 are made of bronze (CuSn10Pb10), precision-machined surface (Ra ≤0.4μm), wear resistance of 0.001mm per 1000 working hours, reducing friction between rotating components.COUPLING, UNIVERSAL SHAFT, ZP001.22 is made of 40CrNiMo alloy steel, with a torque capacity of 500N·m, and a maximum misalignment angle of 3°, ensuring smooth power transmission.

4. Structural & Auxiliary Components

DETENT, ZP001.03 & ZP001.04 are made of alloy steel, heat-treated to Rockwell C 45-50, with a locking force of 1800N, ensuring secure fixation of ZP-375 rotary tables. Pins (ZP001.05, ZP275-03, ZP275-04, ZP001.10, ZP001.15) are made of stainless steel (304), precision-machined surface (Ra ≤0.4μm), shear strength of 850MPa, ensuring secure retention and smooth movement. BOWL, INSERT, ZP001.20.00 has dimensions 2-3/8″-8-5/8″, made of wear-resistant cast steel, surface hardness of Rockwell C 55-60, load-bearing capacity of 600kg. WIPER, MUD, ZP001.17 is made of rubber and steel, with a flexible design to remove debris without damaging components.

5. Gaskets, Shims & Sleeves

Gaskets (ZP001.24, ZP001.18.05/06/07, ZP001.21.05/06) are made of high-temperature resistant rubber or asbestos, thickness tolerance of ±0.001mm, ensuring a tight seal between components. Shims (ZP275-25, ZP275-26, ZP275-20.06) are made of stainless steel, thicknesses ranging from 0.1mm to 0.5mm, tolerance of ±0.0005mm, allowing precise adjustment of component gaps to ensure machining accuracy (±0.005mm). Sleeves (ZP001.21.03, ZP001.21.04.00, ZP001.21.08) are made of carbon steel, precision-machined inner and outer surfaces (Ra ≤0.6μm), ensuring proper spacing and alignment of components.

6. Fasteners & Retaining Components

BOLT, ZP001.12 is made of alloy steel (10.9 grade), tensile strength of 1040MPa, shear strength of 940MPa, suitable for heavy components. NUT, ZP001.13 is made of stainless steel, with a precision thread (tolerance ±0.003mm), ensuring secure fastening. RETAINER RINGS, ZP001.25 & ZP001.21.10 are made of spring steel, with a spring constant of 12N/mm, ensuring secure retention of bearings and other components. PLUG, ZP001.16 is made of stainless steel, with an R1 1/2 thread, leak rate ≤0.002ml/min, corrosion-resistant.

Applicable Working Conditions

Our components are specifically engineered to perform reliably in the harsh operating environments of ZP-375 and ZP275 rotary tables, as well as supporting industrial control systems, including:

• Precision Machining Workshops: Control components (pressure switch 232P43C6HN, inductive sensor 106283), shims, and bearings ensure ZP-375/ZP275 rotary tables maintain high machining accuracy (±0.005mm) in precision drilling, milling, and turning operations.

• Heavy-Duty Industrial Settings: Bearings (2687/1049, 1681/800), fasteners, and structural components withstand high loads (up to 600kg) and continuous operation, suitable for heavy workpiece machining in steel mills and manufacturing plants.

• Dusty & Humid Environments: Seals (ZP275-23, D7-1-67), wipers (ZP001.17), and sensors (106283) provide IP65-IP67 protection, preventing dust and moisture ingress, ensuring component longevity in outdoor or dusty workshops.

• High-Temperature & High-Pressure Environments: Control valves (122P82C6N540), O-seals (FKM), and pressure switches (232P43C6HN) withstand temperatures up to 200℃ and pressures up to 35MPa, ensuring stable performance in high-demand hydraulic systems.

• High-Vibration Environments: Spring retainer rings, fasteners, and shock-resistant gauges (EPDB6-315SD) prevent component loosening and damage, ensuring stable operation of ZP-375/ZP275 rotary tables in high-vibration industrial settings.

Maintenance and Care Suggestions

Proper maintenance and care of ZP-375/ZP275 rotary table components and control systems can extend their service life, reduce downtime, and maintain machining precision. Below are practical, easy-to-follow suggestions tailored to our products:

1. Routine Inspection (Weekly)

Check pressure switch 232P43C6HN for accuracy, and calibrate if needed. Inspect O-rings and O-seals for cracks or aging, and replace if damaged. Test oil pressure gauge EPDB6-315SD for accuracy, and clean the dial if dirty. Check inductive sensor 106283 for proper detection, and clean the sensor head if debris is present. Inspect bearings (2687/1049, 1681/800) for noise or overheating, and add lubricant if necessary. Tighten fasteners and retainer rings to prevent loosening.

2. Regular Maintenance (Monthly)

Lubricate all bearings, bushings, and rotating components with high-temperature lithium grease to reduce friction. Clean control valves (122P82C6N540) and pressure switches to remove debris, ensuring smooth operation. Inspect gaskets and shims for wear or misalignment, and adjust or replace if needed. Clean the insert bowl (ZP001.20.00) to remove workpiece debris, and apply anti-wear coating if necessary. Test signal converters (NPEXA-C311P, NPWD-CD55D) for signal accuracy, and recalibrate if needed.

3. Long-Term Storage & Special Care

Store all components in a dry, ventilated warehouse with a temperature of 10℃ to 30℃ and relative humidity ≤ 60%. Seals, O-rings, and gaskets should be stored in sealed containers to prevent aging and deformation. Bearings, pins, and bushings should be coated with anti-rust oil and wrapped in waterproof material. Control components (pressure switches, sensors) should be stored in a cool, dry place to prevent electrical component damage. Before reinstallation, inspect all components for corrosion or wear, clean them thoroughly, and lubricate moving parts. Calibrate control components and sensors to ensure accuracy.

We supply the following spare parts:

ADJUSTABLE PRESSURE SWİCH 232P43C6HN

Aerospase Controls 122P82C6N540

Oil pressure gauge AROFLEX EPDB6-315SD

Inductive sensor-NCB10-30GM40-N0-15M 106283

Relay 24VAC/DC 8NO/1NC PSR-SC

Signal converter NewPwr NPEXA-C311P

Signal converter NPWD-CD55D

EM-DR1-IS-5-RTB-28 60004-003

Monitor 2402969 BL PPC153000HH CN BLPP3000

Consistometer main card 20-101-0456

SEAL RING SPRING D7-1-67,180x220x15

O-RING,O TYPE,P/N D4-5-73,420×8.6

O-RING,O TYPE,P/N 105.06.20,1000×8.6

O-RING,O TYPE,P/N 105.06.15,800×8.6

BEARING, ROTARY TABLE ZP-375, HH 2687/1049

DETENT, LEFT, ROTARY TABLE, ZP-375 ZP001.03

DETENT, RIGHT, ROTARY TABLE, ZP-375 ZP001.04

PIN, OPERATING LEVER,ROTARY TABLE,ZP-375 ZP001.05

GASKET, 1265/1205, ROTARY TABLE, ZB098 ZP001.24

RING, RETAINER, ROTARY TABLE, ZB098-TC ZP001.25

WIPER, MUD, ROTARY TABLE, ZB098-TC, HH ZP001.17

GASKET, 0.5, ROTARY TABLE, ZB098-TC, HH ZP001.18.05

GASKET, 0.1, ROTARY TABLE, ZB098-TC, HH ZP001.18.06

GASKET, 0.05, ROTARY TABLE, ZB098-TC, HH ZP001.18.07

SLEEVE, SPACER, ROTARY TABLE, ZB098-TC ZP001.21.03

SLEEVE, BEARING, ROTARY TABLE, ZB098-TC ZP001.21.04.00

GASKET, ROTARY TABLE, ZB098-TC, HH ZP001.21.05

GASKET, ROTARY TABLE, ZB098-TC, HH ZP001.21.06

SLEEVE, SHAFT, ROTARY TABLE, ZB098-TC,HH ZP001.21.08

RING, RETAINER, ROTARY TABLE, ZB098-TC ZP001.21.10

BEARING, 91682/800, ROTARY TABLE, ZP275 91682/800

SHIM, ROTARY TABLE, ZP275, SICHUAN LEJU ZP275-25

SHIM, ROTARY TABLE, ZP275, SICHUAN LEJU ZP275-26

BEARING, 1681/800, ROTARY TABLE, ZP275 1681/800

O-SEAL, DIA 800X8.6, ROTARY TABLE, ZP275 ZP275-23

O-SEAL, DIA 1000X8.6, ROTARY TABLE,ZP275 ZP275-29

PIN, HANDLE,OPERATION,ROTARY TABLE,ZP275 ZP275-03

PIN, CATCHER , ROTARY TABLE, ZP 275, HH ZP275-04

BUSHING, MASTER, ROTARY TABLE, ZP 275 ZP275-18D.00

O-SEAL, DIA 404X8.6, ROTARY TABLE,ZP275 ZP275-20.03

SHIM, DIA 426 X 520 X 0.5, ROTARY TABLE ZP275-20.06

O-SEAL, DIA 409X8.6, ROTARY TABLE, ZP275 ZP275-20.13

PIN, ROTARY TABLE, ZP 375, HH ZP001.10

BOLT, ROTARY TABLE, ZP 375, HH ZP001.12

NUT, ROTARY TABLE, ZP 375, HH ZP001.13

PIN, DETENT, ROTARY TABLE, ZP 375, HH ZP001.15

PLUG, R1 1/2, ROTARY TABLE, ZP 375, HH ZP001.16

BUSHING, MASTER, ROTARY TABLE, ZP 375 ZP001.19.00

BOWL, INSERT, 2-3/8″-8-5/8″,ROTARY TABLE ZP001.20.00

COUPLING, UNIVERSAL SHAFT, ROTARY TABLE ZP001.22

On-Site Fault Maintenance Cases

Below are 3 real on-site fault cases and their practical solutions, helping users quickly resolve common technical issues with ZP-375/ZP275 rotary tables and control systems, reduce downtime, and make the most of our products:

Case 1: ZP-375 Pressure Switch Inaccuracy and Hydraulic System Malfunction

Fault Phenomenon: A machining plant reported that the ADJUSTABLE PRESSURE SWİCH 232P43C6HN was inaccurate, causing the ZP-375 rotary table’s hydraulic system to overpressure and shut down unexpectedly. Solution: Remove the pressure switch and calibrate it using a precision pressure gauge, adjusting the set pressure to the recommended range (0.5-5MPa). Clean the switch’s pressure port to remove debris, and reinstall it. Test the hydraulic system, and the pressure switch operated accurately, preventing overpressure shutdowns. Cause Analysis: Dust ingress and lack of calibration, leading to pressure detection inaccuracy. Suggestion: Calibrate the pressure switch monthly and clean the pressure port weekly.

Case 2: ZP275 O-Seal Leakage and Internal Bearing Damage

Fault Phenomenon: A manufacturer reported that theO-SEAL, DIA 800X8.6, ROTARY TABLE, ZP275 ZP275-23 was leaking, causing lubricating oil loss and damage to the 1681/800 bearing. Solution: Remove the leaking O-seal and replace it with a new ZP275-23 O-seal. Clean the seal groove to remove debris, and apply lubricant to the new O-seal for easy installation. Refill the rotary table with lubricating oil, and replace the damaged 1681/800 bearing. After replacement, the leak stopped, and the bearing operated smoothly. Cause Analysis: O-seal aging due to high temperature and prolonged use. Suggestion: Replace O-seals every 12 months and inspect them monthly for cracks.

Case 3: ZP-375 Bearing Wear and Rotational Instability

Fault Phenomenon: A precision engineering company reported that the BEARING, ROTARY TABLE ZP-375, HH 2687/1049 was severely worn, causing the ZP-375 rotary table to rotate unevenly and lose machining precision. Solution: Disassemble the rotary table, remove the worn 2687/1049 bearing, and replace it with a new one. Clean the bearing housing to remove debris, and apply high-temperature lubricant to the new bearing. Reassemble the rotary table and test operation, which restored smooth rotation and machining precision. Cause Analysis: Lack of regular lubrication and prolonged continuous operation, leading to excessive bearing wear. Suggestion: Lubricate the bearing every two weeks and replace it every 24 months for continuous operation.

FAQ (Frequently Asked Questions)

Purchase Guide

We specialize in the production and supply of all the ZP-375/ZP275 rotary table components and control system parts mentioned above, including the ADJUSTABLE PRESSURE SWİCH 232P43C6HN, BEARING 2687/1049, INSERT BOWL ZP001.20.00, and all other models. All products are manufactured in strict accordance with international industrial standards (ISO, IEC, GB/T), with complete quality inspection reports, exclusive performance data, and 100% compatibility guarantees for ZP-375 and ZP275 rotary tables. Whether you need replacement parts for maintenance, components for new rotary table assembly, or control system parts for industrial equipment—including sensors, seals, bearings, and fasteners—we can provide high-quality products at competitive prices. For detailed product parameters, quotation information, and technical support—including guidance on component selection, installation, calibration, and maintenance—please contact us to purchase the products that best meet your operational requirements. We are committed to providing reliable products and professional services to help you reduce maintenance costs, avoid downtime, maintain machining precision, and extend the service life of your ZP-375/ZP275 rotary tables and supporting equipment.

contact us ：

Emeil: [email protected]  

whatsapp: +86 15275658619