Packer Y211-168-120/35, F-1600 Passive Shaft Clamp (AH36001-05.24.00)

Product Introduction

We specialize in the production and supply of high-precision, OE-compatible spare parts for onshore drilling rigs, mud pumps, wellhead equipment, and supporting power, hydraulic, and air control systems. Our product range covers core components such as Packer Y211-168-120/35, Passive shaft F-1600 clamp assembly AH36001-05.24.00, Power system XJ-350 angle drive assembly HC-27835, Cylinder piston F1600 mud pump piston seal ring AH33001-05.20A, and more than 45 other key parts listed. All our products are precision-engineered to match specific equipment models, including XJ series (XJ-350, XJ-40, XJ-65, XJ-80, XJ450, XJ650, XJ60-120), ZJ series (ZJ30/1700CZ), F-series (F-1300, F-1600, F-1600HL), 3NB-1300C hydraulic boxes, S-1650 plungers, and FKQ series remote control systems—directly addressing the core operational needs of target users for reliable, compatible, and durable drilling equipment spare parts.

Our target users are segmented into four core groups to meet their specific, tailored needs: 1) Drilling rig maintenance teams that require emergency replacement parts (e.g., piston seal rings, oil seals, brake valves) to repair rig systems, minimizing unplanned downtime; 2) Oilfield operation companies that need full-set spare parts (e.g., cannula repair kits, packers, turbochargers) to maintain daily drilling, well completion, and well control operations; 3) Drilling equipment rental companies that prioritize long-service-life components (e.g., angle gearboxes, clutches, bearings) to reduce replacement costs and enhance fleet availability; 4) Wellhead and mud pump operators that need compatible parts (e.g., stuffing boxes, filter elements, safety valves) to ensure equipment efficiency and operational safety. We solve the industry’s common pain points of low-quality, mismatched replacement parts—such as poor fit, sealing failure, power transmission loss, hydraulic leakage, and component premature wear—which often lead to increased operational costs, drilling project delays, and safety hazards.

Core Purpose

The core purpose of our full range of drilling equipment spare parts (including Y211-168-120/35 Packer, AH36001-05.24.00 F-1600 Passive Shaft Clamp, HC-27835 XJ-350 Angle Drive Assembly, and AH33001-05.20A F1600 Mud Pump Piston Seal Ring) is to provide 100% OE-compatible, high-performance replacements that ensure the safe, stable, and efficient operation of drilling rigs, mud pumps, wellhead equipment, and supporting power/hydraulic/air control systems. Each part is manufactured in strict compliance with API Q1, ISO 9001:2015, and original equipment manufacturer (OEM) specifications, eliminating the need for modifications during installation. Our parts support the normal operation of key drilling functions—including wellbore isolation (packer), power transmission (clutches, angle drives), fluid sealing (piston seal rings, oil seals), filtration (oil filters), and well control (valves, remote control components)—helping users reduce maintenance time, lower replacement costs, avoid unplanned downtime, and ensure compliance with oilfield operational safety standards.

Function Description

Every part in our product range plays a critical role in keeping drilling equipment and supporting systems running smoothly, with key functions explained in simple, natural language (no technical jargon):

• Packer Y211-168-120/35: A key well completion component used to isolate different formations in the wellbore. It seals the annular space between the casing and drill pipe, preventing fluid communication between formations and ensuring safe well production or stimulation operations.

• Passive shaft F-1600 clamp assembly AH36001-05.24.00: Secures the passive shaft of the F-1600 mud pump or transmission system, ensuring stable power transmission and preventing shaft displacement during high-load operation.

• Power system XJ-350 angle drive assembly HC-27835: Transmits power at a specific angle for the XJ-350 drilling rig’s power system, adjusting the direction of power transfer to match the rig’s mechanical layout and ensure efficient operation of auxiliary components.

• Cylinder piston F1600 mud pump piston seal ring AH33001-05.20A: Seals the piston of the F1600 mud pump, preventing drilling mud leakage from the cylinder and maintaining stable pump pressure for efficient mud circulation during drilling.

• Other Key Parts: Components like Cannula Repair Kit MSS 9-5/8″ (for cannula maintenance), 18-22.5 tire for ZJ30/1700CZ crane assembly (for rig mobility), GJ100A turbocharger for XJ450 main engine (for power enhancement), and FKQ1280-7N High Pressure Ball Valve (for well control) work together to ensure the coordinated, safe operation of the entire drilling system.

Structural Features

General Structural Advantages

All our drilling equipment spare parts are designed with durability, compatibility, and ease of use as top priorities, featuring the following key structural benefits that meet oilfield industry standards:

• High-Quality Material Selection: Sealing components (AH33001-05.20A piston seal ring, XJ01.02.07.81.00 oil seal) use high-temperature, oil-resistant, and mud-resistant rubber/PTFE materials to ensure tight sealing and long service life. Structural parts (AH36001-05.24.00 clamp assembly, HC-27835 angle drive) are made of high-grade alloy steel with heat treatment to enhance hardness, wear resistance, and load-bearing capacity. Filtration components (IR1018 oil filter, ALLISON HT-750 oil filter) use high-efficiency filter media for impurity removal, while packers (Y211-168-120/35) use corrosion-resistant steel for wellbore compatibility.

• Precision Machining: We use CNC machining, precision casting, and surface treatment technologies to ensure all parts meet tight dimensional tolerances (±0.02mm for key dimensions), so they fit perfectly with OEM equipment. For example, P3200003AA XJ450 angle gearbox, IDA-120 telescopic cylinder piston assembly, and ZO2030900001AA XJ450 steering cylinder have precise dimensions to ensure seamless installation and stable operation.

• Wear & Corrosion Resistance: Critical components (packers, piston seal rings, clutches) are treated with carburizing, nitriding, or anti-corrosion coatings to enhance wear and corrosion resistance. This ensures they perform reliably in harsh oilfield environments with drilling mud, moisture, high temperatures (up to 120℃), and heavy vibration.

• Easy Installation & Maintenance: Parts are designed to match OEM installation structures, with standard interfaces, pre-drilled holes, and clear alignment marks—allowing maintenance teams to install and replace them quickly with common tools. For example, Cannula Repair Kit MSS 9-5/8″, EQ140 double chamber brake valve, and CA141 drain valve can be installed in minutes to hours without special equipment.

Key Part-Specific Structural Features

• Packer Y211-168-120/35: Hydraulic expansion design with high-pressure resistance (120MPa) and reliable sealing performance. It features a robust steel body with rubber sealing elements to adapt to wellbore irregularities and ensure long-term isolation.

• Passive shaft F-1600 clamp assembly AH36001-05.24.00: Heavy-duty clamp structure with adjustable tension to fit the F-1600 passive shaft perfectly. It uses high-strength bolts for secure fixation, preventing shaft movement during high-load operation.

• Cylinder piston F1600 mud pump piston seal ring AH33001-05.20A: Double-layer sealing structure with a flexible rubber outer layer and rigid inner core to withstand high mud pressure and prevent leakage. It has a wear-resistant surface to extend service life in abrasive drilling mud.

Applicable Working Conditions

Our spare parts are engineered to adapt to the harsh and complex working environments of onshore oilfield drilling, well completion, and well control operations, with clear applicability to the following scenarios:

• XJ Series Drilling Rigs: Suitable for XJ-350, XJ-40, XJ-65, XJ-80, XJ450, XJ650, and XJ60-120 drilling rigs, including parts like HC-27835 angle drive, GJ100A turbocharger, ZO2030900001AA steering cylinder, and XJ01.05.03.04.00 lift cylinder oil seal—optimized for the rigs’ power, hydraulic, and steering systems.

• ZJ Series & F-Series Equipment: Compatible with ZJ30/1700CZ crane assemblies (18-22.5 tire), F-1300 air systems (PJC1-L8 air bag exhaust valve), F-1600/F-1600HL mud pumps (AH33001-05.20A piston seal ring, GH3161-04.05 stuffing box), ensuring stable operation of key equipment.

• Wellhead & Well Completion Equipment: Suitable for Y211-168-120/35 packers, ZBTF10-16 DN25 PN16 angle valves, and 9-5/8″ Step Hoop Adapter BTC Female-TPCQ Male—ensuring wellbore isolation, fluid control, and wellhead safety during drilling and completion.

• Harsh Oilfield Environments: Resistant to drilling mud, dust, moisture, high temperatures, and heavy vibration. Parts like IR1018 oil filter, GH3161-04.05 stuffing box, and G301.52.10 rotary clutch passive disc perform reliably in these conditions for long periods.

Maintenance and Care Recommendations

Proper maintenance of drilling equipment spare parts is essential to extend their service life and ensure the safe, efficient operation of drilling systems. Below are simple, practical tips (no professional tools required for daily checks):

Routine Inspection (Daily/Weekly)

• Check sealing components (AH33001-05.20A piston seal ring, XJ01.02.07.81.00 oil seal) daily for leakage. If mud or hydraulic fluid leakage is found, replace the seal immediately to prevent system pressure loss and equipment damage.

• Inspect power transmission components (AH36001-05.24.00 clamp assembly, HC-27835 angle drive) weekly for loose connections or abnormal noise. Tighten bolts if needed and replace worn parts to ensure stable power transfer.

• Check filter elements (IR1018 oil filter, ALLISON HT-750 oil filter) weekly for clogging. Clean or replace the filter element to ensure efficient filtration and prevent impurities from damaging the system.

Cleaning and Lubrication (Monthly)

• Clean packers (Y211-168-120/35), scrapers (ZGX 178mm, GX 178mm), and cannula repair kits monthly to remove drilling mud and debris. Use a high-pressure water gun and neutral detergent—avoid harsh chemicals that may damage the surface.

• Lubricate angle gearboxes (P3200003AA), clutch components (G301.52.10 passive disc, AVB700*135 friction plate), and bushings with high-temperature, anti-wear lubricating grease. Apply grease evenly to all moving surfaces to reduce friction and wear.

• Clean valves (ZBTF10-16 angle valve, IA-250 check valve) monthly to remove deposits and ensure smooth operation. Inspect valve seats for wear and replace if needed to maintain tight sealing.

Storage Requirements (Long-Term Storage)

• Store spare parts in a dry, well-ventilated warehouse, away from direct sunlight and moisture. Use waterproof covers for metal components (clamp assemblies, angle drives, packers) to prevent rust or corrosion.

• Store sealing components (oil seals, piston seal rings) and rubber parts in sealed plastic bags at room temperature (15-25℃) to avoid aging. Do not store them near high-temperature or ozone-generating equipment.

• Store repair kits (Cannula Repair Kit MSS 9-5/8″), filters, and small parts (valves, gauges) in labeled boxes to ensure easy retrieval. Keep packers and scrapers in clean, dry packaging to prevent contamination.

We supply the following spare parts:

On-Site Fault Repair Cases (Real Scenarios)

Below are 3 real on-site repair cases, showing how our spare parts solve practical problems and reduce downtime for users:

Case 1: Piston Seal Ring (AH33001-05.20A) Replacement for F1600 Mud Pump

Fault Description: An oilfield’s F1600 mud pump experienced severe drilling mud leakage from the cylinder, causing pump pressure to drop and mud circulation to fail. The maintenance team identified that the original AH33001-05.20A piston seal ring was worn and damaged.

Repair Process: The team replaced the worn seal ring with our AH33001-05.20A Piston Seal Ring. They disassembled the mud pump cylinder, removed the old seal, cleaned the piston and cylinder wall, and installed the new seal. The entire process took 2 hours.

Result: The mud leakage stopped completely, and the pump pressure returned to normal. Mud circulation resumed, and the drilling rig was back to work within 3 hours. Our seal ring’s durable design has withstood abrasive drilling mud for 7 months, eliminating unplanned downtime and mud pump damage.

Case 2: Angle Drive Assembly (HC-27835) Replacement for XJ-350 Drilling Rig

Fault Description: An XJ-350 drilling rig’s power system failed to transmit power to auxiliary components, causing the winch and crane to stop working. The maintenance team found that the original HC-27835 angle drive assembly was worn, with damaged gears that prevented power transfer.

Repair Process: Our HC-27835 Angle Drive Assembly was used to replace the worn one. The team removed the old angle drive, aligned the new assembly with the power system, and secured it with bolts. They tested the power transmission to ensure smooth operation.

Result: The power system resumed normal power transmission, and the winch and crane were back in operation. The drilling rig was back to work within 4 hours. Our angle drive’s precision gear design has maintained stable performance for 8 months, ensuring efficient operation of auxiliary components.

Case 3: Packer (Y211-168-120/35) Installation for Well Completion

Fault Description: A well completion project required isolating two formations in a 168.28mm wellbore. The original packer failed to seal properly, causing fluid communication between formations and delaying the project.

Repair Process: Our Y211-168-120/35 Packer was installed in the wellbore. The team lowered the packer to the target depth, activated it via hydraulic pressure to expand the sealing elements, and tested the isolation performance.

Result: The packer achieved tight isolation between the formations, with no fluid communication detected. The well completion project resumed and was completed on schedule. Our packer’s high-pressure resistance and reliable sealing have maintained stable performance for 6 months, ensuring safe well production.

FAQ (Frequently Asked Questions)

Procurement & Technical Reference Standards

Procurement Reference Standards (For Easy Purchasing)

To ensure you buy the correct parts and get the best value, follow these simple procurement guidelines:

• Confirm Part Details: Provide the exact part name, model, and equipment compatibility (e.g., Y211-168-120/35 packer, AH36001-05.24.00 clamp for F-1600) when placing an order. If you don’t have the full details, share a photo of the old part or equipment model, and we will help you match the correct part.

• Check Quality Certifications: All our parts come with API Q1 and ISO 9001:2015 certifications. We can provide material test reports (MTR) and quality inspection certificates upon request, ensuring you get high-quality, reliable products that meet oilfield industry standards.

• Bulk Order Benefits: For regular customers or large orders (e.g., bulk seals, filters, valves), we offer competitive pricing and customized stock solutions to meet your long-term operational needs, reducing your overall procurement costs.

Technical Problem Reference Standards (For Troubleshooting)

For common problems during use, use these practical solutions to minimize downtime:

• Mud Pump Leakage: If the F1600 mud pump leaks, check the AH33001-05.20A piston seal ring or GH3161-04.05 stuffing box for wear. Replace the faulty component to stop leakage and restore pump pressure.

• Power Transmission Failure: If the XJ-350 rig’s auxiliary components fail to receive power, check the HC-27835 angle drive or AH36001-05.24.00 clamp assembly. Replace worn parts to ensure stable power transfer.

• Wellbore Isolation Issues: If the Y211-168-120/35 packer fails to seal, inspect the sealing elements for damage or contamination. Replace the packer or clean the sealing surface to ensure tight isolation.

Conclusion & Procurement Guidance

Our full range of drilling equipment spare parts—including Y211-168-120/35 Packer, AH36001-05.24.00 F-1600 Passive Shaft Clamp, HC-27835 XJ-350 Angle Drive Assembly, and AH33001-05.20A F1600 Mud Pump Piston Seal Ring—are designed to solve your core operational challenges: unplanned downtime, high replacement costs, and incompatible parts. With strict quality control, precision manufacturing, and 100% OEM compatibility, our parts ensure your XJ/ZJ series drilling rigs, F-series mud pumps, and supporting systems run safely, stably, and efficiently in even the harshest oilfield environments.

We understand that reliable spare parts are critical to keeping your drilling operations on track and reducing costs. Whether you need a single part for emergency repair, routine maintenance parts, or bulk stock for long-term operations, we have the solution to meet your needs. Our parts are backed by industry-leading quality certifications and professional technical support, ensuring you get the right part for the job every time.

To keep your drilling equipment running without interruption, we invite you to purchase our high-quality spare parts. Simply provide the part details you need (e.g., Y211-168-120/35, AH36001-05.24.00, HC-27835) or your equipment specifications, and we will provide you with competitive pricing and reliable supply solutions. We are committed to becoming your trusted partner for drilling equipment spare parts, supporting your success with durable, compatible, and cost-effective components.

contact us ：

Emeil: [email protected]   whatsapp: +86 15275658619

Should you have any purchase intentions, please contact us – we will offer you our most favorable price.