NOV TDS-10SH & RS-F1600/1300 Pump: 5126000670 Solenoid Valve Series

Introduction & Core Purpose Statement

This full line of heavy-duty oilfield replacement components is precision engineered and manufactured for NOV TDS-10SH top drive system, RS-F1600/1300 triplex mud pump, F-800/F1300 mud pump, ZQ203 series drill pipe tong, and Mission centrifugal sand pumps, covering hydraulic solenoid valves, clamping jaws, sealing kits, pump shafts, bearings, fasteners and hydraulic filtration parts. Target users include on-site top drive maintenance crews, mud pump repair technicians, drill pipe tong service teams, oilfield equipment procurement managers, and offshore wellsite operation specialists, fully addressing their refined operational needs: direct OEM-compatible fit, stable performance under extreme high pressure and heavy vibration, long-lasting wear and corrosion resistance, full compliance with API oilfield safety standards, and minimal unplanned downtime caused by sudden part failure.

The core purpose of these parts is to resolve persistent, costly oilfield operational pain points: unstable hydraulic control from solenoid valve failure, mud pump seal leakage leading to pressure loss, rapid wear of drill pipe tong jaws causing pipe slippage, and premature bearing failure halting drilling operations. Every product complies with API 7K, API 8C, API 6A and national mechanical sealing standards, backed by exclusive factory-verified test data: 5126000670 solenoid valve low-temperature operating stability up to 1120 hours, 30123290 7500 PSI flushing pipe service life of 980 operating hours, RS-F1600/1300 crosshead bearing radial load capacity reaching 43600N. Supported by decades of petroleum machinery manufacturing expertise and full-batch performance testing, these parts serve as both a standardized procurement benchmark and a hands-on technical guide for field fault resolution, ensuring safe, continuous operation of core drilling and fluid handling equipment.

Product Introduction

This comprehensive spare parts portfolio includes critical hydraulic control components, mud pump power transmission parts, drill pipe tong clamping accessories, high-pressure sealing kits, and precision fasteners, all machined to strict OEM dimensional tolerances within 0.02mm for perfect interface matching. Key components include the 5126000670 solenoid valve, TQ35-05 6 5/8″ jaw with roller, 30123290 high-pressure flushing pipe, RS-F1600/1300 mud pump crosshead bearing, and full-series mechanical seals and O-rings. Constructed from oilfield-grade alloy steel, high-pressure resistant fluororubber, and wear-resistant forged materials, each part undergoes 100% factory pressure and fatigue testing, requiring no on-site modification for direct installation.

Function & Structural Features

Core Functional Advantages

Hydraulic solenoid valves deliver precise, responsive fluid control, regulating hydraulic system pressure and flow for stable top drive and tong operation; drill pipe tong jaws and clamping parts provide secure, non-slip pipe gripping during makeup and breakout; mud pump shafts, bearings and crosshead components ensure stable power transmission, reducing friction and shaft runout; high-pressure mechanical seals and O-rings block mud and hydraulic fluid leakage, maintaining system pressure integrity; hydraulic filters and filter cores remove fluid impurities, protecting precision valve components from wear; clutch and bladder parts enable smooth power engagement for mud pump systems.

Structural Highlights

Load-bearing pump shafts and jaw components adopt integral forging and surface quenching treatment, delivering high tensile strength and exceptional wear resistance; sealing parts use high-density, H2S-resistant fluororubber, resisting swelling, hardening and cracking under extreme pressure; solenoid valves feature precision spool and low-temperature resistant coils, suitable for harsh climate operation; bearings use precision-ground rolling elements for stable load distribution; all fasteners and locking tabs feature anti-vibration design, preventing loosening under continuous rig vibration.

Applicable Working Conditions

These parts are rated for onshore drilling pads, desert oilfields, and offshore drilling platforms, with an operating temperature range of -45℃ to 140℃. They perform reliably under high-pressure continuous operation, heavy cyclic vibration, and exposure to corrosive drilling fluids and H2S-containing well environments. All hydraulic and electrical components meet Class I, Zone 1 hazardous area explosion-proof safety requirements, exclusively fitting NOV TDS-10SH top drive, RS-F1600/1300 & F-800/F1300 mud pumps, ZQ203 drill pipe tongs, and Mission centrifugal pumps.

Maintenance & On-Site Care Recommendations

1. Inspect all mechanical seals, O-rings and high-pressure flushing pipes every 65 operating hours; replace worn or damaged parts immediately to prevent high-pressure leakage. 2. Lubricate tong jaw rollers, mud pump bearings and crosshead components every 3 months with high-pressure extreme-pressure grease, checking for abnormal noise or radial runout. 3. Clean or replace hydraulic filter cores every 50 operating hours to prevent valve blockage and control failure. 4. Check solenoid valve wiring and sealing every 4 months to ensure stable low-temperature and moisture-resistant operation. 5. Torque all hex bolts and fasteners to specified API standards regularly to counteract vibration-induced loosening. 6. Store precision seals and solenoid valves in a dry, dust-free environment to avoid premature material degradation.

We supply the following spare parts:

Field Fault Repair Cases

Case 1: Changqing Oilfield, Shaanxi - NOV TDS-10SH Solenoid Valve Failure

Location: Changqing Oilfield Onshore Drilling Platform; Fault Model: 5126000670 Solenoid Valve; Load: TDS-10SH top drive hydraulic system rated pressure 68MPa; Field Data: Valve control failure, hydraulic flow instability, top drive action lag; Repair Action: Replace 5126000670 dedicated solenoid valve; Post-repair Indexes: Instant response, stable hydraulic pressure, continuous operation for 1120 hours without fault; Customer Feedback: Fixed control lag issues perfectly, valve performs reliably in low-temperature field conditions.

Case 2: Bohai Offshore Platform - RS-F1600/1300 Mud Pump Bearing Failure

Location: Bohai Offshore Drilling Platform; Fault Model: RS 11309.02.017 Crosshead Bearing; Load: Mud pump 5000 PSI rated working pressure; Field Data: Bearing severe wear, pump shaft runout 0.38mm, abnormal operational noise; Repair Action: Replace crosshead bearing and matching lubrication parts; Post-repair Indexes: Shaft runout reduced to 0.03mm, noise eliminated, stable 5000 PSI pressure operation; Customer Feedback: Resolved offshore high-load bearing failure, extended pump maintenance intervals significantly.

Case 3: Xinjiang Tarim Oilfield - ZQ203 Tong Jaw Wear Failure

Location: Tarim Oilfield Desert Drilling Area; Fault Model: TQ35-05 6 5/8″ Jaw with Roller; Load: ZQ203 tong clamping torque 38KN·m; Field Data: Jaw surface severe wear, drill pipe slipping during operation; Repair Action: Replace TQ35-05 integrated jaw assembly; Post-repair Indexes: Secure pipe gripping, no slipping, jaw wear life extended by 65%; Customer Feedback: Perfect fit for ZQ203 tong, handles desert heavy-load operation flawlessly, reduces frequent replacement costs.

Frequently Asked Questions

Purchase Guidance & Closing Statement

This complete series of oilfield spare parts provides a unified, reliable procurement reference standard for daily equipment maintenance, emergency fault repair, and regular overhauls, with complete model matching, clear technical parameters, and full compliance with global petroleum industry safety and quality standards. It effectively eliminates equipment downtime, operational safety risks, and inflated maintenance costs caused by inferior or mismatched parts, while also serving as a practical technical reference for on-site fault diagnosis, targeted repair, and standardized equipment upkeep.

We specialize in the production and stable supply of these professional oilfield-specific spare parts, maintaining full model inventory and providing professional technical support for model verification, parameter matching, and field installation guidance. Whether you need single emergency replacement parts, complete repair kits for system overhaul, or bulk procurement for long-term rig stocking, we can meet your precise operational needs. Feel free to consult detailed product specifications, confirm equipment compatibility, and submit targeted orders to secure high-quality, durable spare parts that keep your top drive, mud pumps, and drill pipe tongs operating safely and efficiently in even the harshest oilfield environments.

contact us ：

Emeil: [email protected]  

whatsapp: +86 15275658619