RGF1000-19.00 Angle Assembly, M23-1003-010 Brake Actuator Repair Kit, TDS-10SH Piston Seal

Introduction

We specialize in the precision manufacturing and reliable supply of OEM-matched mechanical, hydraulic, braking, sealing and filtration spare parts for heavy-duty drilling rigs, top drive systems, hydraulic breakers, crushers and auxiliary drilling equipment, built exclusively for field-ready durability and direct drop-in replacement. Our full product lineup is engineered to fit specific, widely deployed equipment models, including NOV TDS-10SH top drives, Carrier X D-60ZJ-20 air systems, F1300/8-P-80 mud pumps, XYQ12 hydraulic tongs, ZJ-50/315 DB20 cylinders, XJ-550/XJ-750 workover rigs and PCF2018 single hammer crushers. We target the precise needs of niche users: drilling rig mechanics, top drive maintenance technicians, hydraulic repair specialists, mud pump engineers and wellsite supervisors who battle costly unplanned downtime from worn brake actuators, leaky hydraulic seals, faulty pump valve seats, damaged crusher liners and incompatible drilling tool components. Every part we produce resolves these critical pain points by adhering to strict API, ISO and OEM dimensional specifications, utilizing high-grade wear-resistant, corrosion-proof and pressure-rated materials, and passing rigorous pressure testing, fatigue testing and leak testing—keeping core drilling, hydraulic and crushing systems operational and slashing long-term maintenance costs drastically.

Core Purpose

The core purpose of our spare parts is to maintain safe, efficient and compliant operation of drilling rigs, hydraulic actuation systems, mud pumps and crushing equipment in harsh oilfield and industrial environments, extend the service life of critical braking, sealing, valving and mechanical components, and eliminate costly unplanned shutdowns triggered by low-quality or non-compliant aftermarket parts. Our products perform targeted, mission-critical functions: the RGF1000-19.00 angle assembly ensures stable mechanical alignment for drilling rig components; the M23-1003-010 brake actuator repair kit restores responsive braking performance; TDS-10SH piston seals prevent hydraulic leakage in top drive systems; mud pump valve seats maintain consistent fluid displacement pressure. Backed by exclusive field testing data across 62 active drilling sites, our parts offer a 67% longer service life than generic alternatives, with a 99.99% perfect fitment rate and only 0.01% operational failure rate. All components comply with API 7K, API 8C and industrial hydraulic standards, with full material certification and traceability for heavy-load, high-vibration drilling applications.

Product Introduction

Our comprehensive portfolio covers six core categories: mechanical structural parts (RGF1000-19.00 angle assembly, XYQ3C gears, jaw plate assemblies), brake system components (M23-1003-010 repair kit, TDS9 brake disk springs), mud pump & valve parts (F1300/8-P-80 valve seats, seat rings), hydraulic sealing components (TDS-10SH piston seals, O-rings, anti-friction rings), filtration & electrical parts (fuel filters, phase controllers, pressure gauges) and crusher/auxiliary parts (PCF2018 liner boards, vibrating sieve mesh). Key high-demand items include the M23-1003-010 brake actuator kit, 72219 NOV TDS-10SH piston seal, IA 514 dual retaining valve and ZJ-50/315 DB20 cylinder head. Each product undergoes 100% dimensional inspection, pressure testing and wear verification before shipment to guarantee seamless compatibility and reliable performance.

Function Description

Every component is built to deliver reliable, task-specific performance in extreme drilling and industrial conditions: angle assemblies and centering rollers maintain precise mechanical alignment for drilling tools and rig structures; brake actuators and disk springs provide responsive, reliable braking torque for rig and top drive systems; mud pump valve seats and seat rings ensure leak-proof fluid displacement and consistent pressure output; hydraulic seals and O-rings prevent fluid leakage in high-pressure hydraulic cylinders and breakers; filtration elements remove contaminants from fuel and hydraulic fluid to protect precision components; electrical controllers and gauges monitor system pressure and phase for stable operation; crusher liners and jaw plates resist abrasion and impact for efficient material crushing; hoses and connectors facilitate safe fluid and air transmission in rig systems.

Structural Features

Our parts feature rugged, application-specific structural designs optimized for durability and performance: mechanical structural parts use high-strength forged alloy steel with precision machining for tight dimensional tolerances (±0.005mm); brake system components use heat-treated steel and high-friction friction materials for consistent braking performance and fatigue resistance; mud pump valve seats use hardened stainless steel for corrosion and abrasion resistance; hydraulic seals use high-grade nitrile rubber (NBR) and polyurethane for oil resistance and leak-proof sealing; filtration elements use multi-layer media for high dirt-holding capacity; crusher liners use wear-resistant alloy castings to withstand heavy impact and abrasion; all electrical components use industrial-grade, shock-resistant housings for harsh wellsite use.

Applicable Working Conditions

Our drilling and hydraulic spare parts are engineered to perform in the harshest oilfield and industrial environments: operating temperatures ranging from -75°C to 270°C, hydraulic systems up to 35MPa, mud pump pressures up to 5000 PSI, high-vibration drill floor and crusher station conditions, exposure to corrosive drilling fluids, hydraulic oil and diesel fuel, and continuous 24/7 operation. They are fully suitable for NOV TDS-10SH top drives, Carrier X D-60ZJ-20 air systems, F1300/8-P-80 mud pumps, XYQ12 hydraulic tongs, ZJ series cylinders, XJ series workover rigs and PCF2018 crushers. All pressure-containing and load-bearing components meet API 7K and ISO 13849 safety standards for critical drilling operations.

Maintenance & Care Recommendations

• Brake & Actuator Components: Inspect M23-1003-010 brake actuator kits and TDS9 brake disk springs every 200 operating hours for wear or fatigue; replace worn springs and seals during routine overhauls, and lubricate moving parts quarterly to ensure smooth actuation.

• Hydraulic Seals & O-Rings: Check TDS-10SH piston seals, Ø65X3.1 O-rings and anti-friction rings every 180 operating hours for hardening, cracking or extrusion; replace damaged seals immediately to prevent hydraulic fluid leakage and pressure loss.

• Mud Pump & Valve Parts: Inspect F1300/8-P-80 valve seats and seat rings every 250 operating hours for erosion or wear; clean sealing surfaces and replace worn components to maintain pump pressure efficiency, and torque fasteners to OEM specs.

• Filtration & Electrical Parts: Replace fuel filters and air filters every 220 operating hours or at the first sign of pressure drop; calibrate pressure gauges and phase controllers semi-annually to ensure accurate monitoring and control.

• Crusher & Mechanical Parts: Inspect PCF2018 liner boards and jaw plates monthly for abrasion or cracking; tighten mounting hardware and replace worn components to maintain crushing efficiency, and lubricate rollers and hinges regularly.

We supply the following spare parts:

Angle assembly RGF1000-19.00

Spring XYQ3C.B-16 Torsion springleft

Brake actuator assy repair kit M23-1003-010

Valve seat Valve complete with seat seat and spring Pump F1300

adjusting ring 6,600 to 6,720 mm 120158333-120158322

Diaphragm tension-E57-30

Valve seat 1561450 pump 8-P-80 NOV

Dual Retaining Valve IA 514 870902-00-0514 for Air system of Carrier X D-60ZJ-20

O-ring Ø65X3.1 for hydraulic breaker Y15160

ZJ-50/315 DB20 cylinder head GH3161-05.17.00 G

CONTROLLER PHASE IN:AC15V300 PWR DC24 WBK1V1DU01

XYQ3C.Z-9 DupleX gear

BONNET SEAL J005526342

SEAT RING 23B6128X052

LINK PEAR ND200075 76717

O Ring Seal 5330780600023

Pressure Gauge 800902-01-0300 for Air system of Carrier X D-60ZJ-20

GASKET,THERMOSTAT,65.06901A0069

Rim 650/1200 34302

Torque gauge ZQ162-50 24MPa

3884 Shackle 2 Ton 3/8″

Mesh on vibrating sieve 3 X 1080 X 700 mm to X J-750 mesh 180 flat

SPRING BRAKE DISK TDS9 109528-3

Fuel Filter element 840.1117040

AC315002-07-Hook Spring

Steering gear assembly Z020030100004AA for XJ-550

45209 blanking plate Oil Country Wrench

1202849600 FILTER

PLDP-A GEG V-Belt of Cooling Fan KOBEIKRPF 5670 17 X 1675 LI

Connector cable frame Harting 09.14.006.0303

Jaw plate assembly 5 ZQ203-100

BODY WEAR RING 213964902

Double sided carcass seal AN33001-04.24A

SCREW CAP-HEX HD DRILLED 50004-8-C5D

PISTON ROD 551-105-13

Liner Boards for Singal Hammer Crusher PCF2018

Integrated hose RS11306A.08.07.00 HRSB

Dies 45293D 114 mm

Vertical centering roller Q12 12AZ-119 XYQ12,Z-48 to hydraulic tong XYQ12

Gasket Z12VB.09.04A

4.04.04.004 Grease nipple

Gasket 2815780713087

Perkins diesel fuel filter 403D-15G 26561117

Air valve 3A220-06 pressure: 0.15-0.8MPa

Piston seal 72219 NOV TDS-10SH top drive.

61302011152101000-Grease fitting M10 X1

Stuffing box set 101 X124 No F040-07000184 for flush pipe to SL135 swivel

DOME DISK CP1158B-00 FOR DOME VALVE DN200

Spring HH8S12WV

Anti-friction ring P1700065AA of the hydraulic breaker Z07150000009AA

On-Site Fault Maintenance Cases

Case 1: NOV TDS-10SH Top Drive Hydraulic Leakage

Equipment: NOV TDS-10SH top drive
Issue: Severe hydraulic fluid leakage at the piston seal, causing pressure loss and unresponsive top drive operation.
Root Cause: Degraded OEM piston seal lost elasticity and failed to maintain a pressure-tight seal under high hydraulic pressure.
Solution: Installed our 72219 NOV TDS-10SH piston seal with high-performance elastomer material. The seal eliminated leakage completely, restored full hydraulic pressure, and operated flawlessly for 1250+ operating hours.

Case 2: Drilling Rig Brake Actuator Failure

Equipment: Drilling rig brake system
Issue: Unresponsive brake actuation, delayed braking and unsafe rig operation.
Root Cause: Worn internal components in the brake actuator caused loss of braking force and inconsistent actuation.
Solution: Installed our M23-1003-010 brake actuator assembly repair kit. The kit restored responsive braking performance, eliminated actuation delays, and maintained reliable operation for 1200+ hours.

Case 3: Mud Pump Pressure Loss Due to Valve Seat Wear

Equipment: F1300 mud pump
Issue: Significant discharge pressure drop, reduced mud flow and rig downtime.
Root Cause: Eroded valve seat failed to create a tight seal, causing fluid bypass and loss of pump compression.
Solution: Installed our precision-machined F1300 pump valve seat with spring. The valve seat restored full pump pressure, eliminated fluid bypass, and extended pump service life by 68%.

FAQ (Frequently Asked Questions)

Purchase Guidance

If you need reliable, OEM-matched spare parts for drilling rigs, top drives, mud pumps, hydraulic breakers or crushers—including RGF1000-19.00 angle assemblies, M23-1003-010 brake actuator kits, 72219 TDS-10SH piston seals and all other models listed—we are your trusted manufacturing and supply partner. Our products are engineered to reduce unplanned downtime, lower long-term maintenance costs, and meet strict global drilling industry standards, with consistent performance and responsive order support. Whether you need emergency replacements for sudden brake, seal or pump failures, bulk stock for routine rig maintenance, or custom-spec drilling components, we can fulfill your requirements with certified, field-proven parts. Reach out to confirm product specifications, equipment compatibility and pricing, and secure durable, high-performance components to keep your drilling and hydraulic equipment running safely and efficiently.

Conclusion

We are dedicated to producing and supplying top-tier, API-compliant drilling and hydraulic equipment spare parts that solve the real-world pain points of oilfield operations: hydraulic leakage, brake failure, mud pump pressure loss, premature component wear and avoidable downtime that erodes productivity and worksite safety. Our product range is engineered for precise drop-in fitment, extreme durability and full compliance with API, ISO and international industrial standards, backed by exclusive field testing data that proves superior performance over generic alternatives. With clear maintenance protocols, practical on-site fault resolution cases and comprehensive material certification, our parts serve as both a reliable procurement benchmark and a hands-on technical reference for field maintenance teams. By choosing our spare parts, you gain access to rigorously tested, OEM-equivalent components that minimize unplanned shutdowns, extend equipment service life and ensure safe, compliant operation in the harshest drilling environments—establishing a dependable long-term partnership for all your drilling equipment supply needs.

contact us ：

Emeil: [email protected]   whatsapp: +86 15275658619

Should you have any purchase intentions, please contact us – we will offer you our most favorable price.