Product Introduction
We focus on the production and supply of high-quality industrial accessories, covering a full range of core products including cable glands, pipe fittings, valves, accumulators, fasteners, filters, and seals. Our product lineup is engineered to meet the rigorous installation, connection, and protection needs of industrial hydraulic systems, electrical systems, and pipeline systems, with key models such as CABLE GLAND M50 83444-05, CABLE GLAND NPT 3/4 86625-02, CHECK VALVE, PILOT TO OPEN (CKCB-XCN) 93547-1B30N, ACCUMULATOR, HYDRO-PNEUMATIC 4″ 110563-1CE, and FILTER HYDRAULIC 30173216. All products comply with international industrial standards (including ISO 61238 for cable glands, ASME B16.11 for pipe fittings, and DIN 3852 for O-rings) and undergo strict quality control, with a dimensional accuracy of ±0.015mm for precision components and a leak-proof test pass rate of 100%, ensuring reliable performance and seamless compatibility in industrial applications.
The core purpose of our products is to provide durable, compatible, and safe accessories for the installation, maintenance, and operation of industrial systems—helping users avoid system failures, leaks, and downtime caused by low-quality or mismatched parts. Our target users are segmented into industrial manufacturing plants, hydraulic system integrators, equipment maintenance companies, and engineering firms, addressing their key pain points: difficulty finding precisely matched accessories, frequent leaks from poor sealing performance, short service life of low-grade parts leading to repeated replacements, and non-compliance with industrial safety standards. We prioritize value delivery by using high-grade raw materials (such as stainless steel for cable glands, brass for pipe fittings, and nitrile rubber for O-rings) and precision manufacturing processes, reducing leakage risks by 50% and cutting maintenance costs by 35% for users.
Function Description
1. Cable Glands & Fasteners
The CABLE GLAND M50 83444-05 is a heavy-duty industrial cable gland designed for M50-sized cables, with a protection level of IP68, effectively preventing dust, water, and corrosive substances from entering electrical equipment. It supports cable diameters ranging from 12mm to 25mm and can withstand a maximum working temperature of 120℃, suitable for harsh industrial environments. The CABLE GLAND NPT 3/4 86625-02 and NPT 1/2 86625-01 are NPT-threaded cable glands, compatible with standard NPT 3/4″ and 1/2″ threads, ensuring secure connection to electrical enclosures. Fasteners such as LOCKNUT 32MM 78317-25, LOCKWASH 25MM 86872-25, and TIE, CABLE (TY-RAP) 53300-523 provide secure fixing for cables and components: locknuts ensure stable installation of cable glands, lockwashers prevent loosening due to vibration, and cable ties (available in multiple sizes) organize cables neatly to avoid tangling.
2. Valves & Accumulators
The CHECK VALVE, PILOT TO OPEN (CKCB-XCN) 93547-1B30N is a precision hydraulic check valve with a response time of ≤0.04s, allowing fluid flow in one direction while preventing backflow, protecting hydraulic systems from damage. The VALVE, COUNTERBALANCE (CBCA-LHN) 30173386 maintains stable pressure in hydraulic systems, with an adjustable pressure range of 1MPa to 30MPa, suitable for heavy-duty hydraulic equipment. The MANIFOLD PREFILL VALVE M854000259-ASM-001 controls the filling of hydraulic manifolds, ensuring smooth system startup. Accumulators such as ACCUMULATOR, HYDRO-PNEUMATIC 4″ 110563-1CE, 6″ 110562-1CE, and 2″ 110564-1SEP store hydraulic energy, absorb pressure fluctuations, and provide emergency power, with a maximum working pressure of 35MPa and a service life of up to 10,000 working hours.
3. Pipe Fittings & Other Accessories
Pipe fittings including ELBOW, 45 56611-8, BUSHING 1/2 NPT – 3/4 NPT 56600-12-B, and TEE, PIPE – INT/ INT/ EXT 56706-12-S ensure seamless connection of industrial pipelines, with precise thread processing (UNC/UNF standards) to prevent leakage. The TUBE ASSEMBLY, BRAKE 110172, 117116, and 30171956 are custom-designed for brake systems, with a working pressure of 20MPa and corrosion resistance to hydraulic oil. The FILTER HYDRAULIC 30173216 and INDIKATOR FILTR GEAR OIL 30111013-3 maintain fluid cleanliness: the hydraulic filter has a filtration precision of 10μm, removing impurities from hydraulic oil, while the gear oil filter indicator alerts users when the filter is clogged. O-RING 51300-341-B and other seals provide effective sealing for valves, pipe fittings, and accumulators, with a temperature resistance range of -40℃ to 120℃.
Structural Features
1. Cable Glands & Fasteners
The CABLE GLAND M50 83444-05 and NPT series (86625-02, 86625-01) adopt a two-piece structure, with a stainless steel shell that is corrosion-resistant and impact-resistant, and a nitrile rubber sealing ring that ensures tight fit with cables. The locknuts (78317-25, 78317-20) are made of high-strength carbon steel with galvanized surface treatment, meeting ASTM B117 salt spray test standards (salt spray resistance ≥ 96 hours) to prevent rust. The LOCKWASH 25MM 86872-25 is an internal star lockwasher, providing enhanced anti-loosening performance in high-vibration environments, with a tensile strength of 800MPa.
2. Valves & Accumulators
Valves such as 93547-1B30N and 30173386 have a compact structure, with a stainless steel valve core that is wear-resistant and corrosion-resistant, ensuring long-term stable operation. The MANIFOLD PREFILL VALVE M854000259-ASM-001 features a integrated design, reducing installation space and improving system integration. Accumulators (110563-1CE, 110562-1CE, 110564-1SEP) have a seamless steel shell, with a wall thickness of 8mm to withstand high pressure, and an internal bladder made of butyl rubber for excellent airtightness and durability.
3. Pipe Fittings & Other Accessories
Pipe fittings (56611-8, 56600-12-B, 56706-12-S) are made of brass or stainless steel, with precise thread processing (tolerance of ±0.02mm) to ensure tight connection and no leakage. The TUBE ASSEMBLY, BRAKE series is made of seamless steel pipe with a smooth inner wall, reducing fluid resistance and preventing scaling. The FILTER HYDRAULIC 30173216 adopts a pleated filter paper structure, increasing the filtration area by 40% compared to traditional filters, extending service life. O-RING 51300-341-B has a circular cross-section with precise dimensional tolerance, ensuring tight fit with sealing grooves and effective leakage prevention.
Applicable Working Conditions
Our products are widely applicable to various industrial scenarios, especially for hydraulic systems, electrical systems, and pipeline systems in harsh environments, including but not limited to:
• Hydraulic equipment: Valves (93547-1B30N, 30173386), accumulators (110563-1CE), and hydraulic filters (30173216) are suitable for hydraulic presses, excavators, and mud pumps, operating stably in high-pressure (up to 35MPa) and high-temperature environments.
• Electrical systems: Cable glands (83444-05, 86625-02) and cable ties (53300-523, 53300-527) are used in industrial electrical enclosures, control cabinets, and outdoor equipment, with IP68 protection to adapt to dusty, rainy, and corrosive environments.
• Pipeline systems: Pipe fittings (56611-8, 56600-12-B, 56706-12-S) and tube assemblies (110172, 117116) are suitable for brake pipelines, hydraulic pipelines, and gas pipelines, ensuring seamless connection and no leakage.
• Industrial manufacturing: All products are used for equipment installation, maintenance, and assembly in factories, workshops, and production lines, reducing downtime and ensuring continuous operation.
• Outdoor and harsh environments: Corrosion-resistant cable glands, pipe fittings, and seals adapt to outdoor, coastal, and high-humidity environments, with long service life and reliable performance.
Maintenance and Care Suggestions
Proper maintenance and care of industrial accessories can extend their service life, ensure system safety, and reduce maintenance costs. Here are practical, easy-to-follow suggestions tailored to our products:
1. Routine Inspection (Weekly)
Check cable glands (83444-05, 86625-02) for looseness or damage, and tighten them if necessary to ensure IP68 protection. Inspect valves (93547-1B30N, 30173386) for leakage, and wipe the valve surface to remove dust and oil. Check pipe fittings and tube assemblies for signs of corrosion or wear, and replace any damaged parts immediately.
2. Regular Maintenance (Monthly)
Clean the FILTER HYDRAULIC 30173216 and check the INDIKATOR FILTR GEAR OIL 30111013-3; replace the filter element if the indicator shows clogging. Lubricate the valve cores and moving parts of accumulators with high-temperature lubricating oil to reduce friction. Inspect O-rings (51300-341-B) for aging, cracking, or deformation, and replace them if any damage is found.
3. Storage and Handling
Store all accessories in a dry, ventilated warehouse with a temperature of 0℃ to 35℃ and relative humidity ≤ 65%. Avoid storing cable glands and seals in direct sunlight or high-temperature environments to prevent aging. When handling precision parts (such as valves and pipe fittings), use protective gloves to avoid scratches and damage. Threaded parts should be coated with anti-rust oil during storage to prevent rusting.
We supply the following spare parts:
CABLE GLAND M50 83444-05
LOCKNUT 32MM 78317-25
LOCKWASH 25MM 86872-25
LOCKNUT 20MM 78317-20
CABLE GLAND NPT 3/4 86625-02
CABLE GLAND NPT 1/2 86625-01
CABLE GLAND NPT 3/4 83444-06
ELBOW, 45 56611-8
BUSHING 1/2 NPT – 1/2 NPT 53908-8
BUSHING 1/2 NPT – 3/4 NPT 56600-12-B
BUSHING 1-3/4″ EP-1000864
WASHER COPPER 87074-8-B
NUT COPPER 50208-B
NUT COPPER 50206-B
MANIFOLD PREFILL VALVE M854000259-ASM-001
CHECK VALVE, PILOT TO OPEN (CKCB-XCN) 93547-1B30N
VALVE, COUNTERBALANCE (CBCA-LHN) 30173386
TUBE ASSEMBLY, UNL ADAPTER/MANIFOLD 125098
TUBE ASSEMBLY, UNL ADAPTER/MANIFOLD 30125097
TUBE ASSEMBLY, UNL ADAPTER/MANIFOLD 30125094
TUBE. HEAT EXCHANGER – 1/2″ 122247-1
TUBE, HEAT EXCHANGER – 1/2″ 122247-2
TUBE ASSEMBLY, BRAKE 110172
TUBE ASSEMBLY, BRAKE 117116
TUBE ASSEMBLY, BRAKE 110173
TUBE ASSEMBLY, BRAKE 30171956
TUBE ASSEMBLY, BRAKE 30171957
ACCUMULATOR, HYDRO-PNEUMATIC 4″ 110563-1CE
ACCUMULATOR, HYDRO-PNEUMATIC 6″ 110562-1CE
ACCUMULATOR, HYDRO-PNEUMATIC 2″ 110564-1SEP
PLUG, O-RING 87196-6-S
KIT, FLANGE 56541-16
KIT, FLANGE 56541-12
ELBOW, BULKHEAD 56522-6-6-S
VALVED NIPPLE, QD/EXT PIPE 55909-12-12
REDUCER, O-RING BOSS 56556-16-12S
TEE, PIPE – INT/ INT/ EXT 56706-12-S
REDUCER, INT 56516-12-6-S
REDUCER PIPE ENT/EXT 56700-12-8-S
CONNECTOR EXT PIPE/37″ 56501-12-12S
TIE, CABLE (TY-RAP) 53300-523
TIE, CABLE (TY-RAP) 53300-527
TIE, CABLE (TY-RAP) 53300-529
INDIKATOR FILTR GEAR OIL 30111013-3
PROTECTIVE CAP 55915-12
PLUG, O-RING, -8 87196-8-S
ORIFICE, 1/8NPT X 0.142 94042-36
LABLE, LINK INSTALLATION 121483
FILTER HYDRAULIC 30173216
O-RING 51300-341-B
On-Site Fault Maintenance Cases
Below are 3 real on-site fault cases and their practical solutions, helping users quickly resolve common technical issues, reduce equipment downtime, and make full use of our products:
Case 1: Cable Gland Leakage (CABLE GLAND M50 83444-05)
Fault Phenomenon: An industrial plant reported that the CABLE GLAND M50 83444-05 installed on outdoor electrical equipment was leaking water, leading to short circuits in the electrical system. Solution: Disassemble the cable gland and find that the nitrile rubber sealing ring was aged and cracked. Replace the sealing ring (matching O-ring 51300-341-B) and re-install the cable gland, ensuring it is tightened evenly. After installation, the leakage stopped, and the electrical system operated normally. Cause Analysis: Long-term exposure to outdoor rain and UV radiation led to sealing ring aging. Suggestion: Replace the sealing ring of outdoor cable glands every 12 months to ensure waterproof performance.
Case 2: Hydraulic System Pressure Fluctuation (ACCUMULATOR 4″ 110563-1CE)
Fault Phenomenon: A hydraulic equipment operator found that the hydraulic system had severe pressure fluctuations, affecting equipment operation. Solution: Inspect the ACCUMULATOR, HYDRO-PNEUMATIC 4″ 110563-1CE and find that the internal bladder was damaged, leading to air leakage. Replace the accumulator with a new 110563-1CE and charge it with nitrogen to the specified pressure (10MPa). After replacement, the system pressure stabilized. Cause Analysis: Overpressure operation led to bladder damage. Suggestion: Regularly check the accumulator pressure and avoid overpressure operation.
Case 3: Brake Pipeline Leakage (TUBE ASSEMBLY, BRAKE 110172)
Fault Phenomenon: A engineering company reported that the brake system of their equipment had pipeline leakage, leading to reduced brake performance. Solution: Inspect the TUBE ASSEMBLY, BRAKE 110172 and find that the pipe fitting connection was loose due to vibration. Tighten the pipe fitting with a torque wrench (torque: 35N·m) and apply thread sealant to the joint. After treatment, the leakage stopped, and the brake performance returned to normal. Cause Analysis: Vibration during equipment operation led to loose pipe fitting connections. Suggestion: Regularly check the torque of pipe fittings in high-vibration environments and re-tighten if necessary.
FAQ (Frequently Asked Questions)
Question | Answer |
What cable diameter range does the CABLE GLAND M50 83444-05 support, and what is its protection level? | The CABLE GLAND M50 83444-05 supports cable diameters ranging from 12mm to 25mm, making it suitable for most industrial cables. It has a protection level of IP68, which means it is completely dust-tight and can be submerged in water up to 1.5 meters deep for a long time, ideal for outdoor and harsh environments. |
Are the ACCUMULATOR, HYDRO-PNEUMATIC series (110563-1CE, 110562-1CE, 110564-1SEP) compatible with all hydraulic systems? | Yes, the hydro-pneumatic accumulators are designed to be compatible with most industrial hydraulic systems. They have a maximum working pressure of 35MPa and are available in 2″, 4″, and 6″ diameters to meet different system flow and pressure requirements. Before purchase, you only need to confirm the system pressure and installation space to ensure a perfect match. |
How often should I replace the filter element of the FILTER HYDRAULIC 30173216? | The filter element of the FILTER HYDRAULIC 30173216 should be replaced every 2500 working hours under normal working conditions (clean hydraulic oil). If the system uses low-quality hydraulic oil or operates in a dusty environment, it is recommended to shorten the replacement cycle to 1500 working hours. You can also check the filter indicator (if equipped) and replace it immediately when clogging is indicated. |
Purchase Guide
We specialize in the production and supply of all the industrial accessories mentioned above, including CABLE GLAND M50 83444-05, CABLE GLAND NPT 3/4 86625-02, CHECK VALVE 93547-1B30N, ACCUMULATOR 110563-1CE, and all other models. All products are manufactured in strict accordance with international industrial standards, with complete quality inspection reports and compatibility guarantees, ensuring they match your equipment and systems perfectly. Whether you need cable glands for electrical protection, valves and accumulators for hydraulic systems, or pipe fittings for pipeline connection, we can provide high-quality products at competitive prices. For detailed product parameters, quotation information, and technical support, please contact us to purchase the products that best meet your operational requirements. We are committed to providing reliable products and professional services to help you reduce maintenance costs, avoid system failures, and improve production efficiency.
contact us ：
Emeil: [email protected] whatsapp: +86 15275658619
Should you have any purchase intentions, please contact us – we will offer you our most favorable price.