DQ450DBZ & XJ-450 Oilfield Drilling Rig Full Spare Parts & Sealing Components

1. Core Product Orientation & Target Application

This complete line of spare parts iscustom designed and manufactured for DQ450DBZ drilling pump systems, XJ-450 drilling rig braking systems, Weatherford series drilling tools, and BOMCO centrifugal & slurry pumps, covering high-pressure O-rings, sealing rings, gaskets, friction bushings, brake shoes, pump bushings, electrical components, and specialized fasteners. Target users include on-site drilling rig maintenance mechanics, oilfield hydraulic sealing system engineers, drilling equipment procurement specialists, field maintenance supervisors, and industrial drilling equipment after-sales teams—professionals routinely troubled by drilling fluid leakage, premature sealing failure, brake system wear, mismatched spare parts, high-pressure pump component damage, and unplanned rig downtime in harsh field conditions.

Core Purpose: Every part in this lineup is a precision direct replacement built to meet GB3452.1, JB/ZQ42, and international oilfield drilling equipment standards, designed to restore sealing performance, braking stability, pump operation efficiency, and electrical control reliability of core drilling equipment. These parts resolve critical field pain points including high-pressure drilling fluid leakage, brake slippage, sealing degradation in extreme temperatures, and poor part compatibility, while providing a unified procurement benchmark and hands-on technical troubleshooting guide for on-site maintenance teams.

1.1 Product Introduction

This comprehensive spare parts portfolio covers all key wearing and structural components for DQ450DBZ and XJ-450 drilling rigs, including O-rings (2-360 148.59×5.33, 2-213 23.39×3.53, 136×3.55 GB3452.1), J-sealing rings, OK piston seals, R01-FG double-lip oil seals, brake shoes, friction bushings, pump bushings, diaphragm parts, electrical relays, and BOMCO specialized pump components. All sealing parts are made from oil-resistant, high-pressure polymer rubber; structural and friction components use hardened alloy steel; electrical parts comply with industrial drilling equipment safety standards, fully matching original equipment dimensions.

Exclusive field and laboratory test data: Standard O-rings maintain complete sealing under 38MPa continuous high pressure for 3600 operating hours; R01-FG double-lip oil seals resist drilling fluid corrosion for 2900 working hours; cast brake shoes retain stable friction performance after 7200 braking cycles; pump bushings feature a wear resistance value of 62 HRC, extending service life by over 1200 hours compared to ordinary parts. Backed by mature oilfield parts manufacturing technology and full third-party quality certification, each part undergoes 100% dimensional and pressure testing before shipment, guaranteeing zero modification installation on-site.

1.2 Function Description

Sealing components including O-rings, piston seals, and gaskets prevent drilling fluid, hydraulic oil, and lubricant leakage in high-pressure pump and cylinder systems; brake shoes and friction bushings provide stable, reliable braking for drilling rig winches and transmission systems; pump bushings and pipelines protect pump internals from wear and block impurities; electrical relays and modules ensure stable operation of rig electrical control systems; stop rings, lock nuts, and adapters secure moving components and prevent loosening under high-frequency vibration; diaphragm and stuffing box parts maintain pressure stability of drilling fluid circulation systems.

1.3 Structural Features

High-pressure sealing parts adopt precision compression molding, with uniform thickness and high elastic resilience, perfectly fitting sealing grooves to withstand pressure and temperature fluctuations; friction brake components use integrated casting and sintering technology, with stable friction coefficient and no thermal decay under continuous braking; pump bushings use high-hardness alloy material with smooth inner walls to reduce fluid resistance and wear; threaded fasteners feature anti-loosening thread design, preventing loosening under long-term rig vibration. All parts adopt standard modular design, matching original equipment installation structure for quick disassembly and replacement.

2. Applicable Operating Conditions

These spare parts are built for extreme oilfield drilling environments, suitable for land drilling platforms, desert oilfields, and offshore well servicing operations, operating stably in ambient temperatures ranging from -30℃ to 160℃. They withstand high-pressure drilling fluid erosion, mechanical vibration, mud contamination, and lubricating oil corrosion, fully meeting the operational requirements of DQ450DBZ drilling pumps, XJ-450 rig braking systems, Weatherford drilling tools, and BOMCO series pumps. Parts perform reliably in both daily drilling operations and emergency maintenance, complying with all oilfield industrial safety and equipment performance standards.

We supply the following spare parts:

3. Maintenance & On-Site Engineer Practical Suggestions

3.1 Routine Maintenance Tips

Inspect all sealing rings and O-rings every 50 drilling operating hours, replacing hardened, worn, or cracked seals immediately to avoid fluid leakage; check brake shoe wear thickness every quarter, replacing worn shoes to maintain braking efficiency. Clean pump bushing inner walls and filter impurities every 3 months, replenishing special lubricating grease for rotating components; tighten lock nuts and fasteners monthly to prevent loosening. Test electrical relay and module operation every 6 months, removing dust and debris to ensure stable electrical control.

3.2 On-Site Maintenance Avoidance Guidance

Never reuse removed O-rings, gaskets, or piston seals, as disassembly permanently damages sealing performance; strictly match part models and standards (GB3452.1, JB/ZQ42) during replacement, avoiding mixed use of non-standard parts. When replacing brake friction components, do not use unqualified substitute parts to prevent brake failure; relieve all system pressure before replacing sealing parts to avoid safety hazards. Do not modify pump bushings or pipeline structures, ensuring consistent installation alignment with original components.

4. On-Site Oilfield Fault Repair Cases

4.1 Sichuan Changning Shale Gas Drilling Site

Equipment Model: DQ450DBZ drilling pump; Operating Load: 35MPa continuous drilling fluid pressure; Fault Issue: 2-360 O-ring wear, severe drilling fluid leakage, system pressure instability. Post-repair: Replaced standard 2-360 O-ring and matching gaskets; indicators: No leakage under 38MPa pressure, system pressure stable, continuous operation for 3800 hours. Customer Feedback: Solved persistent leakage problem, reduced maintenance frequency significantly.

4.2 Xinjiang Karamay Oilfield Drilling Rig

Equipment Model: XJ-450 rig braking system; Operating Load: 180-ton winch braking load; Fault Issue: Cast brake shoe wear, brake slippage, unstable braking. Post-repair: Replaced JC-21A-03-17 brake shoes; indicators: Braking force stable, no slippage under full load, friction performance unchanged after 1500 braking cycles. Customer Feedback: Quick replacement, perfect fit, restored rig braking safety.

4.3 Bohai Offshore Oilfield Slurry Pump System

Equipment Model: BOMCO AH100101081600 centrifugal pump; Operating Load: 24-hour continuous operation; Fault Issue: R01-FG oil seal failure, lubricant leakage, pump abnormal noise. Post-repair: Replaced R01-FG 255×299×20 double-lip oil seal; indicators: No lubricant leakage, pump operation noise reduced, stable operation for 3200 hours. Customer Feedback: High-quality sealing parts, adapted to offshore salt spray environment, eliminated equipment failure.

5. Frequently Asked Questions (FAQ)

6. Customer Procurement Guidance

For oilfield drilling teams seeking reliable, long-lasting spare parts to reduce rig downtime, lower maintenance costs, and ensure stable equipment operation in harsh environments, this DQ450DBZ & XJ-450 full spare parts line is the optimal procurement choice. With complete models, strict standard compliance, superior wear resistance, and field-proven performance, these parts eliminate the risks of mismatched and low-quality components, covering all daily maintenance and emergency repair needs.

We welcome customers to provide detailed part numbers, equipment models, and on-site operating conditions to receive a customized accurate quotation, complete technical parameter documents, and professional part selection guidance. We rely on strict production quality control and mature oilfield parts supply experience to provide high-quality, stable spare parts, supporting customers to efficiently complete equipment maintenance and ensure safe and continuous drilling operation.

contact us ：

Emeil: [email protected]  

whatsapp: +86 15275658619