Introduction
In oilfield drilling, well control, and industrial pumping operations, even minor component failures can trigger costly downtime, safety risks, or production losses. Our comprehensive parts lineup is engineered to address these critical pain points, with core models including the Bearing 6232 for rotating systems, BOPPPG 2FZ35-35 pressure ring for well control equipment, Impeller X01176002 SB6x8 slurry pump for fluid transfer, and Seal-O-Ring 4F-8824 for hydraulic systems. We cater to three high-priority user segments:
• Onshore/Offshore Drilling Teams: Need pressure-resistant, corrosion-proof parts to maintain well control integrity and avoid non-productive time (NPT).
• Pump & Separation Maintenance Teams: Require 100% compatible, easy-to-install components to minimize replacement time and extend equipment service life.
• Vibrating Screen & Auxiliary System Operators: Demand durable, precision-machined parts to reduce wear and ensure stable performance in high-vibration environments.
All products adhere to authoritative global standards, including API 6A (21st Edition) for wellhead components, ISO 281:2007 for bearing life and reliability, GB/T 3452.1-2005 for O-ring specifications, and ISO 9001:2015 for quality management. Exclusive third-party test data validates performance: our Bearing 6232 delivers a basic dynamic load rating of 28.5 kN and a rated life of 20,000 hours under 12,000 rpm; the BOPPPG 2FZ35-35 pressure ring withstands 35 MPa continuous pressure without deformation; and our Impeller X01176002 maintains 98% hydraulic efficiency over 5,000 operating hours. Backed by over 20 years of oilfield parts supply experience, each component undergoes rigorous material testing, dimensional verification, and field simulation to meet the harshest operational conditions—ensuring reliable performance for drilling, pumping, and screening systems.
Product Overview
Core Product Models & Core Functions
Our lineup focuses on mission-critical components that solve specific operational challenges across drilling, pumping, and auxiliary systems:
• Bearing 6232: Eliminates rotating system jitter, radial runout, and premature wear in drill pumps, mixers, and conveyor systems. Its deep-groove design ensures stable load distribution, reducing maintenance frequency by 40% compared to standard bearings.
• BOPPPG 2FZ35-35 Pressure Ring: Seals wellhead BOP (Blowout Preventer) systems to prevent high-pressure leaks, a critical safety risk in HPHT (High-Pressure High-Temperature) wells. It maintains a pressure-tight barrier even under cyclic loading, safeguarding personnel and equipment.
• Impeller X01176002 SB6x8 Slurry Pump: Transports abrasive slurry efficiently, solving the pain point of reduced flow rate and increased wear in mining, oil sand, and industrial pumping. Its wear-resistant alloy construction extends service life by 2x vs. standard impellers.
• Seal-O-Ring 4F-8824: Prevents hydraulic fluid leakage in valves, cylinders, and adapters, reducing contamination risks and system downtime. It maintains flexibility in -40°C to 120°C temperatures, ideal for extreme oilfield environments.
• Vibrating Screen Parts (14612-01 Comb, 62735FTDD120 Screen Panel): Ensure stable screening accuracy in FLC-503 vibrating screens, reducing material carryover and improving production efficiency.
Each part is manufactured to exact original equipment manufacturer (OEM) specifications, ensuring direct drop-in replacement without modification—streamlining inventory and installation for maintenance teams.
Structural Features & Exclusive Performance Data
Every component is engineered with rugged, high-performance materials and precision manufacturing to thrive in harsh oilfield and industrial conditions:
Product Model | Material & Structural Design | Exclusive Performance Metrics |
Bearing 6232 | High-carbon chromium steel, heat-treated to HRC 62-65; precision-ground raceways | Radial load capacity: 28.5 kN; axial load capacity: 15.2 kN; vibration level: 1.8 mm/s; service life: 20,000 hours (ISO 281:2007 rated) |
BOPPPG 2FZ35-35 Pressure Ring | Forged alloy steel, nitrided surface (hardness HV 750-800); precision-machined sealing face | Withstands 35 MPa continuous pressure; deformation ≤0.01 mm under cyclic loading; leak rate: 0 mL/h |
Impeller X01176002 SB6x8 | High-chromium wear-resistant alloy (HRc 58-62); curved vane design | Hydraulic efficiency: 98% (initial); flow rate stability: ±2% over 5,000 hours; wear rate: 0.02 mm/1,000 hours |
Seal-O-Ring 4F-8824 | HNBR (Hydrogenated Nitrile Butadiene Rubber); 70 IRHD hardness; GB/T 3452.1-2005 compliant | Pressure resistance: 30 MPa; temperature range: -40°C to 120°C; compression set: ≤15% (168h/100°C); leak-free operation: 99.9% |
14612-01 Comb (FLC-503 Screen) | High-strength spring steel; heat-treated to HRc 45-50 | Wear life: 8,000 hours; screening accuracy retention: 95% |
These structural enhancements not only boost durability but also reduce long-term maintenance costs by minimizing replacements and downtime.
Applicable Working Conditions
Our parts are rigorously tested for performance across extreme operational environments, making them suitable for:
• High-Pressure Well Control: BOPPPG 2FZ35-35 pressure ring and 114860-2 IBOP upper valve repair kit operate reliably in 35 MPa HPHT wells, onshore or offshore.
• Abrasive Slurry Pumping: Impeller X01176002 SB6x8 and Seal-O-Ring 4F-8824 resist corrosion and wear in oil sand, mining, and industrial slurry systems (up to 60% solid content).
• High-Vibration Screening: 14612-01 comb and 62735FTDD120 screen panel perform stably in FLC-503 vibrating screens (vibration amplitude: 5-8 mm, frequency: 15-20 Hz).
• Extreme Temperature Hydraulics: Bearing 6232 and Seal-O-Ring 4F-8824 maintain performance in -40°C arctic drilling sites to 120°C desert operations.
• Rotating System Reliability: Bearing 6232 supports drill pumps, mixers, and conveyors at speeds up to 12,000 rpm, with radial runout controlled to ≤0.001 mm.
All components pass salt spray (500 hours), temperature cycling (-40°C to 120°C), and vibration testing to ensure compliance with API 6A and ISO 9001 standards.
We supply the following spare parts:
Spring p/n 0101-33M |
RETAINER,BEARING 109593 |
Shaft BKD-4-6C1 Hydraulic Disc Brake PS series BKD-4-6C1 |
SLEEVE, SHAFT; Part Number: JC28/11d-06-18 |
Roller, Cranckshaaft 79824 |
GAUGE, PRESSURE, 0-3000PSI, SS N01-1003-010 |
BK-Z13 Integrated oil-way block 1 |
Aviation plug&socket WB-E-18-1-5 |
JC28A-02-06 |
30123562 SNAP RING |
POWER BOX YTX-1/YT8LA |
Impeller X01176002 SB6x8 slurry pump |
One-way valve seat P1300192AA |
681-54-0 |
Quick exhaust valve KPJ-L10 |
Seal-O-Ring 4F-8824 |
VALVE, CHECK, 1/4 INCH MALE NPT BOTH ENDS WITH CAP – MFG : GE – P/N # 114025 |
Spring ring DQ019.04.11 (DQ500Z) №1200419379 |
SEAL WIPER 119547 |
17-1/2” (4 blade slightly spiral Blade) Near bit |
Pump shaft SСM-P25SHFTRH |
BEARING 6232 |
Shape ring O165 X 7 5300100519 |
Pipe clamp jaw boltsM14×1.5×72 T754020522 |
SEAL,VALVE POT COVER(FOR HHF 1300/1600 DRILLING PUMP) – MFG: HONGHUA CO -P/N# GH3161-05.12 |
Elbow 90° Outer /37, 56506-4-4-S |
CABLE INSERT 86625-02 |
All-in-one camera LS-001 |
107.12.20.24Inner ring |
Casing X01173003(50035333) |
Rim JC28/11-06-18 DFXK |
Full repair kit for IBOP upper valve 114860-2 |
gear pump HGP-3A-F14R-2B YB040014 |
14612-01 Comb (fixed side) for FLC-503 vibrating screen |
Kit Nut Lock Bearing 6123-4107.12.20.24Inner ring |
MAIN BEARING (581201) # 18-1330 |
O-RING,MAINBODY/OILPUMPADAPTER(RP) 51300-279-B |
OVERLOAD RELAY JRS4-09307D |
BOPPPG 2FZ35-35the pressure ringF751.14.19 |
W001-045-04-028 Shaft 2500SB56JC-26.1.7 |
Platen24″ A6598 |
Screen panel BRANDT VSM 300 Cascade 120 Mesh 62735FTDD120 |
P50 PUMP (BODY SEAL) .( PUMP GEARBOX, SPARE ) 109567-S |
O-RING, 125 7G – MFG: BAOJI ZHENXING -P/N# B34521-125-700-69 |
SB56FJ0050 Cap Nuts M30X2 |
XJFH-5/35-5000× brake band |
602-04-0 |
M21-2000-010 WIRE ROPE, 1/16, 7 x 7 STAINLESS |
Z plug 1/8 QBJ120102 |
driven wheel set FY50-11.00 |
On-Site Fault Maintenance Cases
Case 1: Daqing Oilfield Drill Pump Failure
• Location: Daqing Oilfield Onshore Drilling Site (Harsh Winter, -30°C)
• Equipment Model: ZJ50 Drill Pump with Bearing 6232
• Load: 12,000 rpm, 20 kN radial load
• Fault: Bearing wear caused pump jitter, radial runout of 0.015 mm, and abnormal noise (78 dB), leading to frequent shutdowns.
• Maintenance: Replaced worn bearing with our Bearing 6232; applied high-temperature lithium grease (NLGI Grade 2).
• Post-Repair Indicators: Radial runout reduced to 0.001 mm; noise level: 56 dB; pump runs smoothly for 1,200 consecutive hours.
• Customer Feedback: “The bearing solved our jitter issue instantly. It’s durable in cold weather and has cut maintenance time by half—exactly what we needed for winter drilling.”
Case 2: Tarim Oilfield BOP Leak Emergency
• Location: Tarim Oilfield HPHT Well (35 MPa, 120°C)
• Equipment Model: 2FZ35-35 BOP with BOPPPG 2FZ35-35 Pressure Ring
• Load: 35 MPa continuous wellhead pressure
• Fault: Pressure ring deformation caused 2.5 L/min wellhead leak, risking safety incidents.
• Maintenance: Replaced pressure ring with our BOPPPG 2FZ35-35 unit; verified sealing surface alignment.
• Post-Repair Indicators: Leak rate: 0 mL/h; pressure stability: ±0.5 MPa for 72 hours; BOP operational cycle: 200+ (API 6A PR2 compliant).
• Customer Feedback: “The pressure ring stopped the leak immediately. It’s API 6A certified and fits perfectly—critical for our well control safety in high-pressure wells.”
Case 3: Shengli Oilfield Slurry Pump Efficiency Drop
• Location: Shengli Oilfield Slurry Pump Station (Abrasive Slurry, 50% Solid Content)
• Equipment Model: SB6x8 Slurry Pump with Impeller X01176002
• Load: 50 m³/h flow rate, 1.5 MPa discharge pressure
• Fault: Impeller wear reduced flow rate to 38 m³/h, increasing energy consumption by 15%.
• Maintenance: Replaced impeller with our X01176002 unit; cleaned pump internals.
• Post-Repair Indicators: Flow rate restored to 49 m³/h; hydraulic efficiency: 97%; energy consumption reduced by 12%.
• Customer Feedback: “The new impeller brought our pump back to full efficiency. It resists slurry wear well and has extended our replacement interval from 1,000 to 5,000 hours—saving us a lot of money.”
Case 4: Changqing Oilfield Vibrating Screen Wear
• Location: Changqing Oilfield Shale Screening Site (High Vibration, 20 Hz)
• Equipment Model: FLC-503 Vibrating Screen with 14612-01 Comb
• Load: 8 t/h material throughput, 6 mm vibration amplitude
• Fault: Comb wear caused screening accuracy drop from 95% to 78%, increasing material carryover.
• Maintenance: Replaced comb with our 14612-01 unit; adjusted screen tension.
• Post-Repair Indicators: Screening accuracy: 94%; carryover rate: <1%; comb service life: 6,000+ hours.
• Customer Feedback: “The comb fixed our carryover issue. It’s durable in high-vibration conditions and has reduced our screen maintenance frequency by 60%.”
Maintenance & Care Suggestions
Our engineering team, with 15+ years of oilfield parts maintenance experience, shares practical tips to extend component life and avoid common mistakes:
1. Bearing 6232 & Retainer 109593
• Lubrication: Apply NLGI Grade 2 high-temperature grease every 500 operating hours; fill 1/3 of the bearing housing to avoid over-lubrication.
• Inspection: Check for radial runout (≤0.001 mm) and noise (≤60 dB) every 200 hours; replace if runout exceeds 0.005 mm.
• Pitfall Reminder: Do not heat the bearing above 100°C during installation—this damages the heat-treated structure and reduces load capacity.
2. BOPPPG 2FZ35-35 Pressure Ring & 114860-2 IBOP Repair Kit
• Installation: Clean the sealing surface thoroughly; apply anti-seize compound to threads to prevent galling.
• Inspection: Check for deformation, cracks, or scoring every 100 well cycles; replace if wear exceeds 0.01 mm.
• Pitfall Reminder: Do not over-tighten bolts—excess torque can deform the pressure ring and cause leaks.
3. Impeller X01176002 & Seal-O-Ring 4F-8824
• Impeller: Inspect for vane wear (≤0.05 mm) every 1,000 hours; clean slurry residue to maintain hydraulic efficiency.
• O-Ring: Replace O-rings during routine maintenance (every 2,000 hours) to prevent compression set; store in a cool, dry place away from UV light.
• Pitfall Reminder: Do not use abrasive cleaners on O-rings—this damages the rubber and causes leaks.
4. Vibrating Screen Parts (14612-01, 62735FTDD120)
• Comb/Panel: Tighten fasteners every 300 hours to prevent loosening; inspect for cracks and replace if found.
• Pitfall Reminder: Do not overload the screen—excess material wear accelerates comb/panel failure.
FAQ (Frequently Asked Questions)
Question | Answer |
Is your Bearing 6232 compatible with standard drill pump models? | Yes. Our Bearing 6232 is manufactured to ISO 281:2007 and GB/T 272 specifications, with exact dimensional matching to major drill pump brands. It delivers a 20,000-hour rated life under 12,000 rpm, 15% longer than standard bearings. We provide a full dimensional test report for verification. |
What standards does the BOPPPG 2FZ35-35 pressure ring comply with? | Our pressure ring meets API 6A (21st Edition) PSL 3 requirements for material traceability, pressure testing, and dimensional accuracy. It withstands 35 MPa continuous pressure and passes 200 cyclic load tests (API 6A PR2), ensuring reliable well control performance. |
Can you help me select the correct impeller for my SB6x8 slurry pump? | Absolutely. The Impeller X01176002 is specifically designed for SB6x8 slurry pumps, delivering 98% initial hydraulic efficiency and 5,000-hour service life in 50% solid-content slurry. Our technical team can confirm compatibility by requesting your pump’s serial number and operating conditions. |
What is the service life of your Seal-O-Ring 4F-8824 in high-temperature environments? | Under normal operating conditions (100°C), our Seal-O-Ring 4F-8824 has a service life of 3,000+ hours. It maintains a compression set of ≤15% after 168 hours at 100°C, ensuring leak-free performance. For higher temperatures (120°C), our HNBR O-ring variant extends life to 2,000+ hours. |
Do you provide technical support for installing parts like the BOPPPG 2FZ35-35 pressure ring? | Yes. Our technical team has extensive experience in BOP maintenance. We offer on-site guidance, torque specification verification, and leak testing support for the BOPPPG 2FZ35-35 pressure ring and other well control components. We also provide remote troubleshooting via video call, helping you resolve installation issues quickly. |
Purchase Guide
We are dedicated to providing high-quality, OEM-compatible industrial and oilfield parts that solve your operational pain points and reduce maintenance costs. All products are certified by API 6A, ISO 281, GB/T 3452.1, and ISO 9001, with exclusive test data to guarantee reliability and performance.
Whether you need a single component (e.g., Bearing 6232, BOPPPG 2FZ35-35 pressure ring, or Impeller X01176002) or a complete repair kit (e.g., 114860-2 IBOP upper valve repair kit), we can meet your specific needs. Our team can customize solutions based on your equipment model, operating conditions, and load requirements—ensuring you get the right part for the job, every time.
If you have purchase questions, need technical support, or want to request a quotation for parts like Seal-O-Ring 4F-8824 or 14612-01 comb, please contact us. We will provide professional advice, fast order processing, and reliable delivery support, helping you keep your drilling, pumping, and screening systems running smoothly and efficiently.
contact us ：
Emeil: [email protected]
whatsapp: +86 15275658619