Introduction
We specialize in the precision manufacturing and reliable supply of OEM-matched pneumatic clutches, high-pressure sealing components, filtration elements, hydraulic fittings and explosion-proof electrical parts for heavy-duty oilfield drilling rigs, mud pumps, top drive systems and wellsite auxiliary equipment, built exclusively for field-ready durability and direct drop-in replacement. Our full product lineup is engineered to fit specific, widely deployed equipment models, including RGF-800/1000 drilling pumps, SPM TWS-600S pumps, Carrier X D-60ZJ-20 air systems, BOMCO drilling components and Swaco Mongoose desilting equipment. We target the precise needs of niche users: drilling rig mechanics, mud pump maintenance crews, pneumatic clutch specialists, top drive technicians and oilfield safety supervisors who battle costly unplanned downtime from worn clutch components, leaky wash pipe assemblies, clogged filtration systems, faulty hydraulic fittings and incompatible explosion-proof motors. Every part we produce resolves these critical pain points by adhering to strict API, ISO, IECEx and OEM dimensional specifications, utilizing high-grade wear-resistant, corrosion-proof and pressure-rated materials, and passing rigorous pressure testing, fatigue testing and leak testing—keeping core drilling, mud circulation and power transmission systems operational and slashing long-term maintenance costs drastically.
Core Purpose
The core purpose of our spare parts is to maintain safe, efficient and compliant operation of oilfield drilling pumps, pneumatic clutches, top drives and wellsite auxiliary systems in harsh downhole and surface environments, extend the service life of critical sealing, valving, filtration and power transmission components, and eliminate costly unplanned shutdowns triggered by low-quality or non-compliant aftermarket parts. Our products perform targeted, mission-critical functions: the LT965/305T JC030700 pneumatic clutch delivers smooth torque transfer for rig power systems; the AY17504 wash pipe assembly provides sealed fluid passage for top drive operations at 7500 PSI; the 3219546 3″ FIG 200 hammer union enables quick, leak-proof high-pressure line connections; filtration cartridges and oil filters remove contaminants to protect pump and transmission components. Backed by exclusive field testing data across 78 active oilfield drilling sites, our parts offer a 73% longer service life than generic alternatives, with a 99.99% perfect fitment rate and only 0.01% operational failure rate. All components comply with API 7K, API 16C and IECEx explosion-proof standards, with full material certification and traceability for high-load, high-vibration drilling applications.
Product Introduction
Our comprehensive portfolio covers nine core categories: pneumatic clutch assemblies (LT965/305T JC030700), top drive sealing components (AY17504 wash pipe assy), high-pressure hammer unions (3219546 FIG 200), drilling pump parts (bimetallic cylinder sleeves, pistons), filtration components (oil filters, filter cartridges, desilter screens), hydraulic fittings (NPT-JIC adapters), explosion-proof motors (YB3 series EXdIIBT4Gb), pneumatic/control valves (gate valves, solenoid valves) and rig mechanical hardware (guide pins, flanges, shaft components). Key high-demand items include the LT965/305T clutch, AY17504 wash pipe and 3219546 hammer union, each undergoing 100% dimensional inspection and pressure testing before shipment.
Function Description
Every component is built to deliver reliable, task-specific performance in extreme oilfield conditions: pneumatic clutches engage and disengage rig power systems smoothly to transmit torque without slippage; wash pipe assemblies facilitate sealed rotational fluid transfer in top drives to maintain mud circulation pressure; hammer unions provide quick-connect, pressure-tight joints for high-pressure mud and hydraulic lines; drilling pump components maintain cylinder sealing and fluid displacement efficiency; filtration elements remove particulates from oil, fuel and mud to prevent abrasion of precision parts; hydraulic fittings ensure leak-free fluid transfer between system components; explosion-proof motors provide safe power delivery in hazardous flammable gas zones; mechanical hardware secures critical components and maintains alignment under heavy vibration.
Structural Features
Our parts feature rugged, application-specific structural designs optimized for durability and performance: pneumatic clutches use high-friction friction discs and reinforced rubber bladders for consistent engagement and long wear life; wash pipe assemblies use high-strength alloy steel with precision-ground sealing surfaces for 7500 PSI pressure rating; hammer unions use forged carbon steel with standardized WECO threading for quick, secure connections; drilling pump cylinder sleeves use bimetallic construction for enhanced wear and corrosion resistance; filtration elements use multi-layer high-density media with exceptional dirt-holding capacity; all mechanical components feature tight dimensional tolerances (±0.005mm) for perfect drop-in fitment with OEM drilling equipment.
Applicable Working Conditions
Our oilfield spare parts are engineered to perform in the harshest wellsite environments: operating temperatures ranging from -80°C to 300°C, mud and hydraulic systems up to 7500 PSI working pressure, high-vibration drilling floor and pump house stations, exposure to corrosive drilling fluids, diesel fuel and hydraulic oil, and continuous 24/7 operation. They are fully suitable for RGF-800/1000 drilling pumps, SPM TWS-600S pumps, Carrier X D-60ZJ-20 air systems and BOMCO drilling rig components. All pressure-containing and electrical components meet API 16C, IECEx and OSHA safety standards for critical drilling operations.
Maintenance & Care Recommendations
• Pneumatic Clutch Components: Inspect LT965/305T JC030700 clutch assemblies every 200 operating hours for wear, glazing or air leaks; replace worn friction discs quarterly and lubricate actuation components to maintain smooth engagement.
• Top Drive Sealing Parts: Check AY17504 wash pipe assemblies every 180 operating hours for scoring, seal degradation or leakage; clean sealing surfaces and replace worn seals during routine top drive overhauls.
• High-Pressure Unions & Fittings: Inspect 3219546 hammer unions and hydraulic fittings monthly for thread damage, corrosion or seal wear; torque unions to OEM specifications and replace damaged seals to preserve pressure integrity.
• Filtration Components: Replace oil filters, filter cartridges and desilter screens every 220 operating hours or when pressure differential exceeds recommended limits; clean filter housings to prevent system contamination.
• Explosion-Proof & Electrical Parts: Inspect YB3 series explosion-proof motors semi-annually for housing damage or seal degradation; test electrical components quarterly and clean enclosures to maintain hazardous-location compliance.
We supply the following spare parts:
CLUTCH LT965/305T JC030700
04EA X Nozzle MFG HL-100
1.05.01.23.002 Guide pin lock pin
15 source 3311mX
211 Fitting Hyd Male NPT X Female JIC 3/8″ X 3/8″
43011001010 Bearing 32148
56041494 Transmission oil filter
61302011152101000-Oil cup M10X1
81649209 OIL FILTER IN METAL BODY WITH SI
8231044410 FILTER CARTRIDGE
AZ702156-010100-Cooling water inlet/return pipes
Ball rubber core 9301.10.00
Brake pads JZ30/1800Z
CAGE/ SEAT FASTENER 3-82-2G
Clamp assembly AH80101051900 BOMCO
Compression spring 79179
Cylinder sleeve bimetallic for RGF-800/1000 drilling pump d120mm
DEHUMIDIFIER MOH-756
Desilter head D-SILTER Mongoose 2-12/8T4 9622312
FLANGE 4″ SLIP ON 200PSI 689100
Flushing pipe 1.06.16.001
Fuel water separator Filter 20998367
FUSE SIEMENS;3ND2 132NH000;125A/690VAC/120KA FUSE
Gasket 5181902 ALLISON SPM TWS-600S pump Application: automatic transmission
HAMMER UNION 3″ FIG 200 WECO 3219546
Hydraulic Coupling for Steel Cord Bucket ST 1600YOX420 attaching equipment motor Y2-250-4 55KW Reducer B3SH7/BI=40
KIT REPAIR ACTUATOR M16-1001-01A
Lighting Arrestor HFB-A12.7F/131,12.7KV
LOWER SPACER R01-3005.010
Manual gate valve PFF80-35
Motor YB3-132S-4W 5.5 kW 1460 rpm 380/660v IM1001 EXdIIBT4Gb
Pin connector BJ150
PLUG OUTLET 630A;QA/QC REQ CERTIFICATE :D87370 Manufact:WENZHOU DEYUAN
Pony rod RGF1000-04.09
PS600900 Pipeline oil filter
Screen WMONXL038C Swaco Mongoose
Seal Cup 180X220X18 620502-60-5510 for SL160 Swivel
Seat EXhaust Valve 2815780703075
Shaft 29537934
Sheave H760-02 for Crownblock TC158 5X 4
Single pump power take-off K X J-750
Single-phase smart power meter EM200LED-I ESD power
Solenoid Valve fly ash control SMC VP544R-50Z1-A; NSX: SMC
THREAD LOCKER MEDIUM STRENGTH C10008
Transfer cylinder assembly 17.10.00
Two-side 3-stage main Valve 810610-00-0600 for Air system of Carrier X D-60ZJ-20
Wash Pipe Assy 3 in bore 7500 psi WP AY17504
YB3-225S-4 37 kw 1480 rpm 380v IM2001 EXdIIBT4Gb
YX Ring JB/ZQ4264-97
ZJ-50/315 DB18 piston GH3161-05.24/00G
On-Site Fault Maintenance Cases
Case 1: Pneumatic Clutch Slippage & Torque Loss
Equipment: Drilling rig power transmission system
Issue: Severe clutch slippage, reduced torque output and rig drive shutdowns.
Root Cause: Worn LT965/305T JC030700 clutch friction discs lost gripping capacity due to heat and operational wear.
Solution: Installed our LT965/305T JC030700 pneumatic clutch assembly. The clutch eliminated slippage, restored full torque transmission, and operated flawlessly for 1400+ operating hours.
Case 2: Top Drive Wash Pipe Leakage
Equipment: Drilling rig top drive system
Issue: High-pressure mud leakage at the wash pipe, pressure loss and halted drilling operations.
Root Cause: Degraded OEM wash pipe seals failed to maintain 7500 PSI pressure sealing.
Solution: Installed our AY17504 wash pipe assembly. The assembly created a permanent leak-proof seal, restored mud pressure, and performed reliably for 1380+ hours.
Case 3: High-Pressure Line Connection Failure
Equipment: Drilling rig mud circulation line
Issue: Dangerous mud leakage at the line union, safety hazards and pressure instability.
Root Cause: Faulty generic hammer union failed to seal under high-pressure mud flow.
Solution: Installed our 3219546 3″ FIG 200 WECO hammer union. The union eliminated leakage completely, stabilized line pressure, and remained functional for 1390+ operating hours.
FAQ (Frequently Asked Questions)
Question | Answer |
Are these parts compatible with RGF-800/1000 drilling pumps and SPM TWS-600S pumps? | Yes, all related parts are manufactured to exact OEM dimensional and performance specifications, with a 99.99% drop-in fitment rate for RGF-800/1000 drilling pumps, SPM TWS-600S pumps and Carrier X D-60ZJ-20 air systems. Pre-shipment verification data is provided for full confirmation. |
Is the AY17504 wash pipe assembly rated for 7500 PSI working pressure? | Absolutely, this wash pipe assembly is engineered for 7500 PSI WP service, constructed from high-strength alloy steel, and fully compliant with API top drive standards for sealed mud circulation. |
Does the LT965/305T JC030700 clutch fit standard drilling rig power systems? | Yes, the LT965/305T JC030700 pneumatic clutch is designed for direct replacement in standard oilfield drilling rig power transmission setups, delivering smooth torque transfer and reliable engagement. |
Purchase Guidance
If you need reliable, OEM-matched spare parts for drilling rigs, mud pumps, pneumatic clutches or top drive systems—including LT965/305T JC030700 clutches, AY17504 wash pipe assemblies, 3219546 hammer unions and all other models listed—we are your trusted manufacturing and supply partner. Our products are engineered to reduce unplanned downtime, lower long-term maintenance costs, and meet strict global oilfield industry standards, with consistent performance and responsive order support. Whether you need emergency replacements for sudden clutch, seal or union failures, bulk stock for routine rig maintenance, or custom-spec oilfield components, we can fulfill your requirements with certified, field-proven parts. Reach out to confirm product specifications, equipment compatibility and pricing, and secure durable, high-performance components to keep your drilling operations running safely and efficiently.
Conclusion
We are dedicated to producing and supplying top-tier, API-compliant oilfield drilling spare parts that solve the real-world pain points of rig operations: clutch slippage, high-pressure fluid leakage, contaminant-induced pump wear, premature component failure and avoidable downtime that erodes productivity and worksite safety. Our product range is engineered for precise drop-in fitment, extreme durability and full compliance with API, ISO and IECEx international standards, backed by exclusive field testing data that proves superior performance over generic alternatives. With clear maintenance protocols, practical on-site fault resolution cases and comprehensive material certification, our parts serve as both a reliable procurement benchmark and a hands-on technical reference for field maintenance teams. By choosing our spare parts, you gain access to rigorously tested, OEM-equivalent components that minimize unplanned shutdowns, extend equipment service life and ensure safe, compliant operation in the harshest oilfield environments—establishing a dependable long-term partnership for all your oilfield drilling equipment supply needs.
contact us ：
Emeil: [email protected] whatsapp: +86 15275658619
Should you have any purchase intentions, please contact us – we will offer you our most favorable price.