Product Introduction
We specialize in manufacturing and supplying high-reliability, OEM-compatible spare parts tailored for oilfield drilling equipment (ZJ-20 rig), industrial pumps (BOMCO pump, centrifugal pump HSR 8X6X14), hydraulic equipment (Weatherford WL16k-25 hydraulic wrench, ZQ162 hydraulic tong), air conditioning systems (YORK, Carrier X D-60ZJ-20), and electrical/mechanical systems. Our comprehensive product portfolio covers critical components across filters, hydraulic parts, electrical connectors, mechanical accessories, and seals, with key models including 328-3655 hydraulic filter, 4″ HAMMER UNION FIG200 2000PSI CWP 20410, harting connector 19300241422, Contour jaw plate 100121-001, and Crosshead pin AH0801010407 BOMCO pump.
All our parts comply with stringent international standards, including ISO 9001 for quality management, API 7K for oilfield drilling equipment, ISO 16889 for filtration systems, IEC 60947 for electrical components, and ASME B16.34 for valves and unions. Each component undergoes a rigorous 45-point quality inspection process, with exclusive performance data demonstrating superior reliability: the 328-3655 hydraulic filter maintains 99.7% filtration efficiency for particles ≥1μm and withstands 30 MPa pressure; the 4″ HAMMER UNION FIG200 handles 2000PSI CWP and has 99.9% leak-proof performance; the Harting 19300241422 connector has IP67 protection and 99.99% signal transmission reliability; the Contour jaw plate 100121-001 has a service life of 18,000 operating cycles. These specifications are engineered to eliminate costly unplanned downtime, reduce maintenance costs by 67%, and keep oilfield, industrial, and hydraulic/electrical equipment operating at peak efficiency in harsh and hazardous environments.
Our core value lies in solving the most pressing pain points for maintenance professionals across oilfield and industrial sectors: hard-to-source specialized parts (such as ZJ-20 air system parts, BOMCO pump crosshead pins, Weatherford hydraulic wrench jaw plates, and Harting connectors), incompatible parts causing equipment damage or operational failure, low-quality components that fail prematurely in high-pressure, high-vibration, or corrosive environments, and lack of reliable replacement parts for critical systems like rig air/hydraulic systems and industrial pumps. By prioritizing value delivery, we use premium materials—high-efficiency filter media for filters, high-strength alloy steel for hydraulic parts, industrial-grade engineering plastics for connectors, and corrosion-resistant materials for seals—to ensure 100% compatibility with target equipment, extend part service life by 65%, and minimize maintenance-related downtime.
Core Purpose & Target User Needs
The core purpose of our products is to provide reliable, fully compatible spare parts for the maintenance, repair, and replacement of oilfield drilling equipment, industrial pumps, hydraulic tools, air conditioning systems, and electrical/mechanical systems, ensuring uninterrupted operation across ZJ-20 rigs, BOMCO pumps, Weatherford WL16k-25 hydraulic wrenches, and Carrier/YORK air systems. These components play critical roles in their respective systems: the 328-3655 hydraulic filter keeps hydraulic fluids clean to protect valves and pumps; the 4″ HAMMER UNION FIG200 ensures secure, leak-proof connections for high-pressure fluid lines; the Harting connectors ensure stable electrical signal transmission; the Contour jaw plate 100121-001 provides grip for Weatherford hydraulic wrenches; and the Crosshead pin AH0801010407 ensures smooth operation of BOMCO pumps. All parts are designed to meet the exact specifications of the equipment they serve, making them ideal for emergency repairs and routine maintenance.
We cater to four key user segments, each with specialized, critical needs:
• Oilfield Rig Technicians: Service ZJ-20 rigs, relying on parts like Air MiXer 810906-00-0430, Dryer 81099-00-8100, 4″ HAMMER UNION FIG200, and IBOP 1.10.05.007 to ensure rig air system integrity, high-pressure fluid connection safety, and smooth drilling operations.
• Pump Maintenance Technicians: Maintain BOMCO pumps and centrifugal pump HSR 8X6X14, requiring parts like Crosshead pin AH0801010407, MK-164HL 14/15 piston assy, QC010017 Piston pins, and anti-friction sleeve to ensure pump reliability, smooth operation, and leak-proof performance.
• Hydraulic Tool Technicians: Maintain Weatherford WL16k-25 hydraulic wrenches and ZQ162 hydraulic tongs, relying on parts like Contour jaw plate 100121-001, Seal YXD75 ZQ16210009, Clamp cylinder assembly HH8S, and roller parts 010103-00M to ensure hydraulic tool grip, seal integrity, and mechanical performance.
• Electrical & HVAC Technicians: Service electrical systems, air conditioning units, and electrical actuators, needing components such as Harting connectors (19300241422, 9300060301, 9330242616), Electrical Actuator BLF-04No11.2D, Economizer YORK M7215A1024, and FUSE ETI NH000 NV00 C to ensure stable power transmission, HVAC system efficiency, and circuit protection.
Key pain points we solve: Specialized ZJ-20, BOMCO, and Weatherford parts that are hard to source; incompatible parts causing costly equipment damage (e.g., incorrect crosshead pins leading to BOMCO pump failure, non-OEM jaw plates damaging Weatherford hydraulic wrenches); low-quality filters and seals failing under high pressure; faulty electrical components causing signal loss or system malfunctions; worn mechanical parts reducing equipment efficiency—all of which lead to unplanned downtime, reduced productivity, and increased operational costs. Our parts eliminate these issues by meeting OEM specifications and delivering superior durability and performance.
Function Description
1. Filters & Filtration Parts
These components keep hydraulic fluids, air, and fuel clean, protecting equipment from contamination and extending service life.
328-3655 hydraulic filter: A hydraulic filter designed to remove contaminants from hydraulic fluids, preventing damage to hydraulic valves, pumps, and cylinders. 57805822 Air filter: An air filter for industrial equipment, filtering dust and debris to ensure clean air intake. Fuel Filter Element FS1006: A fuel filter element, removing impurities from fuel to protect engine components and ensure efficient combustion.
2. Oilfield Rig & High-Pressure Connection Parts (ZJ-20)
These components ensure the safe, efficient operation of ZJ-20 rig air systems and high-pressure fluid connections.
4″ HAMMER UNION FIG200 2000PSI CWP 20410: A 4-inch hammer union with 2000PSI CWP rating, providing secure, leak-proof connections for high-pressure fluid lines in oilfield rigs. Air MiXer 810906-00-0430 for Air system of ZJ-20: An air mixer for ZJ-20 rig air systems, mixing air to maintain stable air pressure and flow. Dryer 81099-00-8100 for Air system of Carrier X D-60ZJ-20: A dryer for ZJ-20 rig air systems, removing moisture from compressed air to prevent corrosion and system damage.
3. Pump & Piston Parts (BOMCO, Centrifugal Pump)
These components maintain the reliability, smooth operation, and efficiency of industrial pumps and piston systems.
Crosshead pin AH0801010407 BOMCO pump: A crosshead pin for BOMCO pumps, connecting the piston rod to the crosshead and ensuring smooth reciprocating motion. MK-164HL 14/15 piston assy 6-1/2: A piston assembly for industrial pumps, ensuring fluid displacement and leak-proof performance. Centrifugal pump HSR 8X6X14 anti-friction sleeve: An anti-friction sleeve for HSR 8X6X14 centrifugal pumps, reducing friction between moving parts and extending pump life.
4. Hydraulic Tools & Mechanical Parts (Weatherford, ZQ162)
These components support the performance, grip, and durability of hydraulic wrenches, tongs, and mechanical systems.
Contour jaw plate 100121-001 with jaw size 8 5/8 Weatherford WL16k-25 hydraulic wrench: A contour jaw plate for Weatherford WL16k-25 hydraulic wrenches, providing secure grip on pipes during tightening or loosening. Seal YXD75 ZQ16210009: A seal for ZQ162 hydraulic tongs, ensuring leak-proof performance in hydraulic systems.Clamp cylinder assembly HH8S: A clamp cylinder assembly for hydraulic tools, providing clamping force for secure operation.
5. Electrical & Connector Parts
These components ensure stable electrical signal transmission, power supply, and circuit protection in industrial and oilfield environments.
harting connectors (19300241422, 9300060301, 9300065423, 9330242616, HAN40D 09 21 040 3101): Industrial Harting connectors for electrical systems, providing secure, reliable signal and power transmission in harsh conditions. Electrical Actuator for Fan Aeration BLF-04No11.2D: An electrical actuator for fan aeration, controlled by 4-20mA signal current and 380V power, adjusting fan speed for optimal aeration. FUSE ETI NH000 NV00 C;50A/500VAC/120KA FUSE: An ETI fuse, protecting electrical circuits from overload and short circuits with 50A rating and 500VAC voltage.
6. Auxiliary & HVAC Parts
These components facilitate equipment maintenance, assembly, and HVAC system operation, supporting routine repairs and system efficiency.
Economizer for air conditioning YORK M7215A1024: An economizer for YORK air conditioning units, improving energy efficiency by utilizing outdoor air. Button LA38-11 Z3D5Q113: A control button for industrial equipment, enabling easy operation and control. WASHER THRUST DOOSAN 140110-00041: A thrust washer for Doosan equipment, distributing pressure and reducing friction between moving parts.
Structural Features
1. Filters & Seals
328-3655 hydraulic filter: Made of high-efficiency glass fiber filter media, stainless steel housing, filtration efficiency of 99.7% for particles ≥1μm, pressure resistance up to 30 MPa, operating temperature range of -30°C to +100°C, and service life of 2,800 operating hours. It is designed to fit standard hydraulic filter housings, facilitating easy replacement. GARLOCK Oil seal 53X8630 R222627-8630: Made of high-quality nitrile rubber, dimensions 53X8630, operating temperature range of -20°C to +80°C, pressure resistance up to 12 MPa, and service life of 9,000 operating hours, ensuring reliable oil sealing.
2. Rig & High-Pressure Parts
4″ HAMMER UNION FIG200 2000PSI CWP 20410: Made of high-strength carbon steel, 4-inch diameter, 2000PSI CWP rating, corrosion-resistant coating, operating temperature range of -40°C to +120°C, and service life of 25,000 operating cycles, ensuring secure, leak-proof high-pressure connections. Air MiXer 810906-00-0430 for ZJ-20: Made of aluminum alloy, lightweight and corrosion-resistant, air flow capacity of 500 L/min, operating pressure range of 0.6-1.0 MPa, and service life of 15,000 operating hours.
3. Pump & Piston Parts
Crosshead pin AH0801010407 BOMCO pump: Made of alloy steel, surface hardness of HRC 45-50, precision-machined to fit BOMCO pumps, operating temperature range of -20°C to +120°C, and service life of 20,000 operating hours, ensuring smooth reciprocating motion. MK-164HL 14/15 piston assy 6-1/2: Made of high-strength steel, piston diameter of 6.5 inches, surface wear-resistant coating, operating temperature range of -20°C to +110°C, and service life of 12,000 operating hours.
4. Hydraulic Tools & Electrical Parts
Contour jaw plate 100121-001 Weatherford WL16k-25: Made of high-strength alloy steel, jaw size 8 5/8 inches, surface hardness of HRC 55-60, wear-resistant design, and service life of 18,000 operating cycles, providing secure grip for hydraulic wrenches. harting connector 19300241422: Made of industrial-grade thermoplastic (PA66), gold-plated contacts (contact resistance ≤3.0 mΩ), IP67 protection against dust and water, locking mechanism for secure connections, and operating temperature range of -40°C to +85°C, ensuring reliable signal transmission.
Applicable Working Conditions
Our products are engineered to perform reliably in the most demanding oilfield and industrial environments, covering a wide range of operating conditions:
• Oilfield Rigs (ZJ-20): These parts operate in high-vibration (up to 18 g), high-temperature (up to 125°C) environments, exposed to drilling mud, oil, and harsh weather (extreme cold, heat, and humidity), with high-load and high-pressure (up to 30 MPa) requirements for fluid connections and air systems.
• Industrial Pumps (BOMCO, Centrifugal HSR 8X6X14): Pump parts operate in high-pressure (up to 25 MPa), high-temperature (up to 110°C) environments, exposed to hydraulic oil, drilling mud, and corrosive fluids, with continuous operation demands and high vibration (up to 17 g).
• Hydraulic Tools (Weatherford WL16k-25, ZQ162): Hydraulic tool parts operate in dusty, high-vibration (up to 16 g) environments, exposed to dirt, oil, and varying temperatures (-30°C to +80°C), with heavy-load operation demands for gripping and clamping.
• Electrical & HVAC Systems: Electrical components operate in ambient temperatures ranging from -40°C to +85°C, with exposure to dust, moisture, and high vibration; HVAC parts operate in temperature ranges of -10°C to +50°C, ensuring energy efficiency and system stability.
• High-Pressure Fluid Systems: High-pressure parts (hammer unions, filters) operate in pressures up to 30 MPa, exposed to corrosive fluids and harsh oilfield conditions, requiring reliable leak-proof performance.
Maintenance and Care Suggestions
Proper maintenance and care of these spare parts will extend their service life, reduce downtime, and ensure the reliability of your oilfield, industrial, and hydraulic/electrical equipment. Below are practical, easy-to-follow suggestions tailored to our products:
1. Weekly Routine Inspection
Check 328-3655 hydraulic filter and 57805822 Air filter for clogging; inspect 4″ HAMMER UNION FIG200 for leaks. Test Harting connectors for secure connections; verify Electrical Actuator BLF-04No11.2D for proper operation. Check Contour jaw plate 100121-001 for wear.
2. Monthly Maintenance
Clean the surface of Crosshead pin AH0801010407 to remove dust and debris; inspect GARLOCK Oil seal 53X8630 for wear. Lubricate roller parts 010103-00M with industrial-grade lubricant; check Seal YXD75 ZQ16210009 for leaks. Tighten bolts and washers (WASHER THRUST DOOSAN 140110-00041) if loose due to vibration.
3. Quarterly Maintenance
Replace 328-3655 hydraulic filter, Fuel Filter Element FS1006, and Gasket 107.35.110.09 if worn; inspect and test 4″ HAMMER UNION FIG200 for pressure resistance. Clean and inspect MK-164HL 14/15 piston assy for wear and corrosion; replace Air filter element of compressor AF-01 if clogged. Test Economizer YORK M7215A1024 for energy efficiency.
4. Long-Term Storage
Store metal parts (crosshead pins, hammer unions, jaw plates) in a clean, dry environment; coat with anti-rust oil to prevent corrosion. Keep electrical components (Harting connectors, electrical actuators, fuses) in anti-static packaging at 10-30°C with relative humidity ≤60%. Store filters, seals, and HVAC parts in a cool, dry place, protected from dust and moisture. Before reinstallation, test all components, calibrate actuators and switches, and verify compatibility with your equipment.
We supply the following spare parts:
328-3655 hydraulic filter
4″ HAMMER UNION FIG200 2000PSI CWP 20410
5126040510-Pressure switch G1/4
57805822 Air filter
Air filter element of compressorAF-01 88290006-013 0917
Air MiXer 810906-00-0430 for Air system of ZJ-20
BEARING INBOARD 661009010 661009010A
Button LA38-11 Z3D5Q113
Centrifugal pump HSR 8X6X14 anti-friction sleeve
Clamp cylinder assembly HH8S
Composite ring 202.1mm 29546156
CONTACT MODULE BE102C 1NC 690100475
Contour jaw plate 100121-001 with jaw size 8 5/8 Weatherford WL16k-25 hydraulic wrench
Crosshead pin AH0801010407 BOMCO pump
Dryer 81099-00-8100 for Air system of Carrier X D-60ZJ-20
Economizer for air conditioning YORK M7215A1024
Electrical Actuator for Fan Aeration BLF-04No11.2DType AS-25 Singal Current 4-20mA 380V
EX 13-3-A-12-330PN plug
Fuel Filter Element FS1006
FUSE ETI NH000 NV00 C;50A/500VAC/120KA FUSE
GARLOCK Oil seal 53X8630 R222627-8630
Gasket 107.35.110.09 Lanshou LS
Grooved Liner NBM451-2000
HARTING 09 21 007 3131
HARTING 09160 243001
harting connector 19300241422
harting connector 9300060301
harting connector 9300065423
harting connector 9300165426
harting connector 9330242616
harting HAN40D 09 21 040 3101
IBOP 1.10.05.007 IBOP IBOP Roller
INNER TOOTH RING AF50001-01.04.15
Inserts 65652-3 set of 4
LOCK CYLINDER 920-11-0
Logic Element LC50B20D6X R900938033
MK-164HL 14/15 piston assy 6-1/2
Pendant assembly PHS2E-4
Piston nut GH 3161-05.32.00 G
QC010017 Piston pins
ramp 0101-30M
Ring 128 X 7-GS GB/T3452.1-2005
roller parts 010103-00M
Seal YXD75 ZQ16210009
SEAT BONNET J005521364
Spring QB7401.4-94 360 17-7PH
STEM SCREW WITH BEARINGS J0023888
The first stage piston ring 1120-F11 QB7511-2005 4M50104.21-00 4F-11
Throttle controller 5100150196
WASHER THRUST DOOSAN 140110-00041
On-Site Fault Maintenance Cases
Below are 3 real on-site fault cases and practical solutions, helping you quickly resolve common technical issues, reduce downtime, and maximize the performance of our components:
Case 1: ZJ-20 Rig Air System Moisture Buildup (Dryer 81099-00-8100)
Fault Phenomenon: A ZJ-20 rig air system experienced moisture buildup, leading to corrosion in air lines and reduced system efficiency. Analysis: The Dryer 81099-00-8100 was faulty, failing to remove moisture from compressed air. Solution: The faulty dryer was replaced with a new 81099-00-8100, and the air system was flushed to remove existing moisture.Result: Moisture buildup was eliminated, air system corrosion stopped, and system efficiency was restored. Tip: Inspect dryers weekly for moisture output and replace every 15,000 operating hours.
Case 2: BOMCO Pump Reciprocating Failure (Crosshead pin AH0801010407)
Fault Phenomenon: A BOMCO pump experienced rough operation and reduced efficiency, caused by a worn crosshead pin. Analysis: The Crosshead pin AH0801010407 was worn, leading to uneven reciprocating motion and increased friction. Solution: The worn crosshead pin was replaced with a new AH0801010407, and the pump was lubricated and tested. Result: Pump operation became smooth, efficiency was restored to 98%, and no further wear occurred. Tip: Inspect crosshead pins monthly for wear and replace every 20,000 operating hours.
Case 3: Weatherford Hydraulic Wrench Grip Failure (Contour jaw plate 100121-001)
Fault Phenomenon: A Weatherford WL16k-25 hydraulic wrench failed to grip pipes, leading to operational delays. Analysis: The Contour jaw plate 100121-001 was worn, reducing grip strength and precision. Solution: The worn jaw plate was replaced with a new 100121-001, and the wrench was calibrated. Result: Grip strength was restored, the wrench operated normally, and pipe handling tasks resumed smoothly. Tip: Inspect jaw plates weekly for wear and replace every 18,000 operating cycles.
FAQ (Frequently Asked Questions)
Question | Answer |
Is the 4″ HAMMER UNION FIG200 compatible with all 4-inch high-pressure fluid lines in oilfield rigs? | No, the 4″ HAMMER UNION FIG200 2000PSI CWP 20410 is designed for specific 4-inch high-pressure fluid lines with 2000PSI CWP rating. Its connection thread, pressure capacity, and sealing design are tailored to match this specification. We recommend verifying your fluid line’s pressure rating and thread type before purchase, as it may not be compatible with lines requiring higher or lower pressure ratings. |
Can the 328-3655 hydraulic filter be used in high-temperature hydraulic systems? | Yes, the 328-3655 hydraulic filter is engineered to operate in high-temperature hydraulic systems, with an operating temperature range of -30°C to +100°C. It maintains stable filtration efficiency even at maximum temperature, making it suitable for use in oilfield and industrial hydraulic systems that operate in high-temperature environments. However, we recommend avoiding prolonged operation above 100°C to extend its service life. |
What is the service life of the Harting 19300241422 connector in dusty oilfield environments? | Under dusty oilfield environments, the Harting 19300241422 connector has a service life of approximately 10,000 mating cycles—slightly less than the 13,500 cycles in normal conditions. With weekly cleaning to remove dust from the connector and its housing, the service life can be extended by 20%, ensuring long-term reliable signal transmission for oilfield electrical systems. |
Purchase Guide
We specialize in the production and supply of all the industrial spare parts listed, including 328-3655 hydraulic filter, 4″ HAMMER UNION FIG200 2000PSI CWP 20410, harting connector 19300241422, Contour jaw plate 100121-001, and all other models. All products are manufactured in strict accordance with international standards (ISO 9001, API 7K, IEC 60947) and OEM specifications, ensuring 100% compatibility with your equipment. Each part comes with a comprehensive quality inspection report and exclusive performance data, guaranteeing superior reliability and durability.
Whether you need a single replacement part for emergency repairs, a filter for routine maintenance, or a bulk order for system overhauls, we provide high-quality products at competitive prices. For detailed product parameters, quotation information, and technical support—including guidance on part selection, installation, and maintenance—please contact us to purchase the products that best meet your operational requirements. We are committed to providing reliable products and professional services to help you reduce maintenance costs, avoid unplanned downtime, and extend the service life of your oilfield, industrial, and hydraulic/electrical equipment.
contact us ：
Emeil: [email protected] whatsapp: +86 15275658619
Should you have any purchase intentions, please contact us – we will offer you our most favorable price.