T200668-2-SH Set Back Hanger Assy & 7624-5105 Rotary Slips Oilfield Spare Parts Supply

Introduction: Reliable Spare Parts to Keep Your Drilling Operations On Track

For drilling contractors, rig maintenance teams, and oilfield service providers, nothing is more frustrating than unplanned downtime caused by a faulty hanger, worn slip insert, or broken hinge pin. Every hour your rig is idle costs an average of $12,900, and generic, ill-fitting spare parts only compound the problem—leading to repeated failures, costly equipment damage, and missed project deadlines. Our comprehensive range of oilfield drilling spare parts, highlighted by the T200668-2-SH Set Back Hanger Assy (for HT-100 & HT-65 Tongs), 7624-5105 Rotary Slips (7 1/2″–8 5/8″), E29343-1 MYT Slip Assembly, and T30117 Type “C” Tong Complete, is engineered to eliminate these headaches. Designed to seamlessly fit HT-65/HT-100 tongs, Type B/C tongs, AOT “DCS” Drill Collar Slips, ZJ series rigs (ZJ 30-ZJ 70), and varco bj-compatible equipment, our parts solve the most common field pain points: incompatible components that waste labor, premature wear that increases replacement costs, and hard-to-source parts that extend downtime. Backed by 22 years of supplying high-quality parts to 3,800+ oilfield sites across 50 countries, all our products comply with API 7K, API 6A, and ISO 9001:2015 standards—each component passes 20 rigorous quality inspections, including batch and heat number tracing for full accountability. Our SDXL 15521 Rotary Slips, for example, last 1,500+ drilling hours, outperforming generic alternatives by 700 hours, while our T200668-2-SH Hanger Assy handles 100,000 ft-lbs of torque without failure—matching the torque rating of HT-100 tongs themselves.

Core Purpose & Target User Needs

Our spare parts serve one critical purpose: to ensure your drilling rigs and handling tools operate safely, efficiently, and without costly interruptions. We tailor our products to three key user groups: drilling contractors managing onshore/offshore rigs who need reliable parts to meet tight project timelines and avoid financial losses from downtime; rig maintenance technicians tasked with minimizing repair time, reducing labor costs, and ensuring equipment safety; and procurement teams seeking cost-effective, high-quality replacements that fit seamlessly with existing equipment (no modifications needed). We directly address the daily frustrations you face: parts that don’t fit (requiring costly rework or risking equipment damage), components that wear out too quickly (forcing frequent replacements), and delays in sourcing critical parts (extending downtime). With our parts, you’ll avoid the average $77,400 loss from a single 6-hour unplanned shutdown and keep your operations running smoothly.

Product Overview

Product Introduction

Our product lineup covers every essential spare part your drilling operation needs, from hanger assemblies and rotary slips to latch components, grease fittings, and tong jaws. Key models include the T200668-2-SH Set Back Hanger Assy (designed specifically for HT-100 & HT-65 tongs, handling up to 100,000 ft-lbs of torque), 7624-5105 Rotary Slips (7 1/2″–8 5/8″ size for secure drill pipe gripping), E29343-1 2 7/8” X 2 7/8” MYT Slip Assembly (for reliable drill string hold), T30117 Type “C” Tong Complete (less lug jaws, compatible with 7 5/8”–10 3/4” pipe sizes), and DCS R 2620 Button Inserts (for AOT “DCS” Drill Collar Slips). All parts are manufactured using high-strength alloy steel (heat-treated to 41-45 HRC), corrosion-resistant rubber compounds, and precision-machined components—following API 7K standards for drilling equipment safety and durability. Our exclusive material testing shows that our 34-206 Inserts (SET OF 4) handle 85,000 lbs of clamping force without slipping, while our E939672-19 Cotter Pins resist rust and corrosion for 2,200+ hours in offshore environments—far longer than the 750-hour lifespan of generic cotter pins. Every part is designed to match OEM specifications, ensuring seamless compatibility with your existing tools and rigs, including interchangeability with major manufacturer tongs like Varco BJ and Woolley.

Function Description

Each part in our lineup plays a vital role in keeping your rig and handling tools operational, solving specific pain points you face in the field: T200668-2-SH Set Back Hanger Assy supports HT-100 & HT-65 tongs, preventing sagging or misalignment during high-torque pipe makeup/breakout—solving the common problem of tong instability that leads to equipment damage. 7624-5105 Rotary Slips grip drill pipes tightly, avoiding slippage that could damage the drill string or cause well control issues—eliminating the risk of costly pipe repairs. E29343-1 MYT Slip Assembly provides a secure hold on 2 7/8” drill pipe, ensuring smooth drilling operations even in high-pressure environments. T30117 Type “C” Tong Complete (less lug jaws) serves as a direct replacement for worn tong bodies, reducing the need to replace entire tongs and saving costs. DCS R 2620 Button Inserts fit AOT “DCS” Drill Collar Slips, restoring grip and preventing collar slippage—solving the frustration of worn inserts that compromise safety. Grease fittings (E940308-1) ensure proper lubrication of moving parts, reducing friction and wear—avoiding the common issue of seized components that halt operations. Every part works together to create a reliable, low-maintenance system that keeps your rig running.

Structural Characteristics

Our parts are built to withstand the harshest oilfield conditions, with structural features that address real-world wear and tear: All metal components (including T200668-2-SH Hanger Assy and 7624-5105 Rotary Slips) are heat-treated to a hardness of 41-45 HRC, making them resistant to bending, wear, and impact—solving the problem of premature part failure. Our SDXL 15521 “SD” Type Rotary Slips feature a multi-segment hinged design that provides a full wrap-around grip, preventing pipe damage and ensuring stability, while their inserts use a proprietary rubber compound that offers 28% better grip than standard inserts. Cotter pins (E939672-19) are zinc-plated to resist rust and corrosion, even in saltwater offshore environments. Hinge pins (2525, 7613-A-12) have a precision-machined surface with a tolerance of ±0.001 inches, ensuring a perfect fit and smooth movement—eliminating the frustration of stuck or misaligned hinges. The modular design of all our parts makes installation quick and easy; most components (like E940308-1 Grease Fitting or E55508 Guide Plate Screw) can be replaced in under 20 minutes by a single technician, reducing labor costs and downtime. Slip springs (E945044-2) are engineered to maintain consistent tension, preventing slip failure—a critical feature after industry reports of spring rod parting causing tong instability.

Applicable Working Conditions

Our spare parts are engineered to perform in the most challenging oilfield environments, including: onshore deep wells (temperatures up to 215°F, pressures up to 16,500 psi), offshore semi-submersible rigs (saltwater corrosion, high winds, and constant vibration), shale gas drilling sites (continuous high-torque operations), and acidic gas fields (H2S exposure). They are compatible with HT-65/HT-100 tongs, Type B/C tongs, AOT “DCS” Drill Collar Slips, ZJ series rigs (ZJ 30-ZJ 70), and workover rigs (XJ 200-XJ 800 series). Whether you’re drilling in the Permian Basin’s arid deserts, the North Sea’s rough waters, the Middle East’s high-temperature fields, or Canada’s cold shale plays, our parts will maintain performance and reliability. Our 26” O.D. 19/7704-A-35 “UC-3” Casing Briefs handle large casing diameters, making them ideal for deep offshore wells, while our T20000-SH-2 Safety Handle Kit fits all AOT tongs—providing universal safety support across your equipment fleet.

Maintenance & Care Recommendations

To maximize the service life of our parts and avoid costly mistakes, our senior oilfield engineers (with 28+ years of on-site experience) recommend these practical tips: Inspect T200668-2-SH Set Back Hanger Assy every 150 drilling hours for signs of bending or wear—replace it if the hanger’s thickness is reduced by more than 0.02 inches (a common mistake that leads to tong instability). Clean slip inserts (34-206, DCS R 2620) after each use with a non-abrasive cleaner to remove drilling mud and debris, which can reduce grip and cause premature wear—we stencil all inserts with batch and heat numbers for full traceability, making maintenance tracking easier. Lubricate hinge pins (2525, 7613-A-12) and grease fittings (E940308-1) with high-temperature grease every 160 hours to prevent friction and seizing—avoid using generic grease, which breaks down in high temperatures and causes component failure. Store 26” O.D. 19/7704-A-35 “UC-3” Casing Briefs in a dry, clean area when not in use to prevent corrosion of the metal segments. For offshore applications, apply a corrosion-resistant coating to all metal parts every 4.5 months to protect against saltwater damage. Never reuse E939672-19 Cotter Pins—they are designed for one-time use, and reusing them can lead to breakage and equipment failure, similar to the safety risks highlighted in industry spring failure alerts.

We supply the following spare parts:

T26783 HANGER ONLY F/TYPE B TONG

E29343-1 2 7/8” X 2 7/8” MYT SLIP ASSEMBLY

T50512-C “HANGER BOLT NUT”

DCS R 2620 BUTTON INSERTS FOR AOT “DCS” DRILL COLLAR SLIPS

CENTER SEGMENT 7502-B-217

34-609 “GREASE CERT 2”

E30358 3 1/2” X 2 7/8”

E945044-2 “SLIP SPRING 8”

E24071-6 7 5/8” HYC BOTTOM GUIDE PLATES (SET)

26” O.D. 19/7704-A-35 “UC-3” CASING BRIEFS

3/4” HEX NUT f/ROPE GUIDE 900645-50

7 1/2″ – 8 5/8″ 7624-5105

HINGE PIN w/ COTTER 2525

E55508 “GUIDE PLATE SCREW 8”

4” REDUCER 2168

T8150 ADJUSTABLE STOP BOLT NUT

E11581 LATCH CAM

INTERMEDIATE SEGMENT f/DCSL 2512

E55511 4 1/2” X 4 1/2” HYC SLIP ASSY.

E939672-19 COTTER PIN

LINK ASSY. COMPLETE 7624-B-7

T200668-2-SH SET BACK HANGER ASSY. F/ HT-100 & HT-65 TONG

E32892 HINGE PIN RETAINER (11 3 /4″ – 20″)

E23553 “LATCH LOCK BOLT 1”

34-602 GATE

E8151 UPPER LINK BLOCK BOLT, NUT, & COT. 2

5 1/2” O.D. SDXL 15570 “SD” TYPE ROTARY SLIPS LESS INSERTS

T200668-2-SH SET BACK HANGER ASSY. F/ HT-100 & HT-65 TONGT30727-1 2 7/8 — 4 1/4 LUG JAW ASSEMBLY

34-606 LIFTING ARM

E940308-1 GREASE FITTING

23-163 REDUCERS

2 HINGE PIN 7613-A-12

ECCEN.PIN, HPD LOCK 2 32-696

E23729 “LATCHLOCK*”

T939099-596 BALANCING SCREW BOLT

K-20 OR K-25 ROPE GUIDE 8527-5023

E9561 “DOOR CATCH SPRING*”

T20000-SH-2 “SAFETY HANDLE KIT (fits all AOT tongs) 3”

5 1/2” x 4 1/2” SDXL 15521 “SD” TYPE ROTARY SLIPS WITH INSERTS

INSERT RETAINER RING 7” 3742

T30117 TYPE “C” TONG COMPLETE W/STANDARD LEVER LESS LUG JAWS (7 5/8” – 10 3/4”)

E30841 LATCH LOCK DOOR PIN

E34612 HINGE PIN (3 1/2” – 8 5/8”)

E939009-65 UPPER & LOWER LINK BLOCK PIN

E940308-1 GREASE FITTING

E29350 2 1/16” MYT SETTING RING

HOLDDOWN BOLT LOCKSCREW 32-500

23-170 BASIC

HINGE PIN F/SLIP W/COTTER 7502-A-216

34-206 3 1/2” X 2 7/8” INSERTS (SET OF 4)

On-Site Fault Repair Cases

These real-world cases from our customers show how our parts solve critical drilling issues, reduce downtime, and save money:

1. Permian Basin, Texas, USA: A drilling contractor using HT-100 tongs experienced a T200668-2-SH Set Back Hanger Assy failure (generic hanger broke under 85,000 ft-lbs of torque) while making up pipe on a 14,000-foot well with a load of 950,000 lbs. Downtime was costing $1,950 per hour. We supplied the T200668-2-SH Hanger Assy, which was installed in 28 minutes. After replacement, the hanger has handled 100,000 ft-lbs of torque for 1,600+ hours. The rig manager said: “The T200668-2-SH hanger is built to last—we’ve eliminated tong instability and cut hanger replacement costs by 60%.”

2. North Sea, Offshore Norway: An offshore rig had a 7624-5105 Rotary Slip failure (generic slips wore out after 480 hours) during drilling operations at 15,500 psi pressure. The rig was using a ZJ 60 rig with a load of 880,000 lbs. Our 7 1/2″–8 5/8″ 7624-5105 Rotary Slips were installed in 23 minutes. The slips have now lasted 1,550+ hours without slippage. The maintenance technician reported: “The 7624-5105 slips handle high pressure and constant vibration—we haven’t had a single drill pipe slippage incident since installation.”

3. Alberta, Canada: A shale gas rig using Type “C” tongs had a T30117 Type “C” Tong Complete failure (original tong body cracked under 70,000 ft-lbs of torque) during 24/7 drilling. Downtime was costing $1,750 per hour. We supplied the T30117 Tong Complete (less lug jaws), which was installed in 45 minutes. The tong now handles 80,000 ft-lbs of torque without damage, and the customer noted: “The T30117 tong is far more durable than the original—we’re seeing 3.2x longer service life and no more unexpected tong failures.”

4. Middle East, Kuwait: A ZJ 50 rig experienced DCS R 2620 Button Insert failure (generic inserts wore out after 520 hours, causing drill collar slippage) while handling 115,000 lbs collars at 12,500 feet. Our DCS R 2620 Button Inserts were installed, and they have securely held 220+ drill collars without slippage. The drilling foreman said: “The DCS R 2620 inserts restore the grip we need—we no longer worry about collar damage or well control issues, and they last nearly 3x longer than generic inserts.”

FAQ (Frequently Asked Questions)

Why Choose Our Spare Parts?

When you choose our oilfield drilling spare parts, you’re investing in reliability, durability, and peace of mind. We back all our parts with a 12-month warranty, and we maintain a large inventory of key models (including T200668-2-SH, 7624-5105, and T30117) to ensure you get the parts you need when you need them. With 22 years of experience supplying parts to 3,800+ oilfield sites—including major drilling contractors and national oil companies—our 99.3% customer satisfaction rate speaks to our commitment to quality. Our exclusive material testing, strict quality control (including batch and heat number tracing for inserts), and API certifications mean you’ll spend less on replacements and downtime, and more on productive drilling operations. We understand the pressure you’re under to keep your rigs running, and our parts are designed to take that pressure off—built to the same standards as the industry’s top equipment manufacturers.

Call to Action

Don’t let faulty, incompatible spare parts derail your drilling operations or eat into your profits. Whether you need a single T200668-2-SH Set Back Hanger Assy, a set of 34-206 Inserts, a 7624-5105 Rotary Slip, or a full inventory of critical spares like the T30117 Type “C” Tong Complete, we have you covered. Our parts are designed to fit your equipment, solve your pain points, and keep your operations running smoothly—backed by the expertise and reliability you can trust. Contact us today to discuss your specific needs, get a quote, and secure the high-quality spare parts your team depends on. With our parts, you’ll minimize downtime, reduce costs, and focus on what matters most: safe, efficient, and profitable drilling.

contact us ：

Emeil: [email protected]  

whatsapp: +86 15275658619