KNT7625 Series Parts: Reliable Spare Parts for TQ508/70Y, KJD9625 & KNT9625 Equipment

Introduction: Eliminate Unplanned Downtime with Precision KNT7625 Spare Parts

For oilfield maintenance technicians, procurement specialists, and equipment operators, unplanned downtime is more than an inconvenience—it’s a costly disruption that eats into productivity and profits. Imagine your TQ508/70Y hydraulic casing power tong (a critical tool for 9 5/8″～20″ casing make-up and break-out) grinding to a halt because of a worn center roller, or your KJD9625 drilling equipment failing due to a loose locknut. These small, critical components—like the KNT7625-87 center roller, KNT7625-151 locknut, or KNT7625-157 INA3212 roller bearing—are the backbone of your operations, and low-quality replacements only lead to more frequent failures. Our KNT7625 series spare parts, covering everything from brackets and fasteners to rollers and bearings, are engineered specifically to fit TQ508/70Y, KJD9625, KNT9625, and KNT13625 equipment. We solve the pain points you face daily: ill-fitting parts that require modification, frequent wear that causes repeated shutdowns, and components that can’t withstand the harsh oilfield environment. Whether you’re maintaining hydraulic power tongs, drilling rig components, or transmission systems, our parts are designed to keep your equipment running reliably, so you can focus on keeping your operations on track.

Core Purpose: Our KNT7625 series parts are essential replacements and upgrades for TQ508/70Y hydraulic casing power tongs (which operate at 12～18 MPa hydraulic pressure and deliver up to 70 KN·m torque), KJD9625 drilling equipment, KNT9625 stamping machinery, and KNT13625 transmission systems. The product range includes a comprehensive array of components: structural parts (KNT7625-78 Lower slot bracket, KNT7625-82 Received plate), fasteners (KNT7625-79 Hex Bolt 3/8″*2 1/2″, KNT7625-80 Spring washer 3/8″, KNT7625-85 Hexagonal thin nut 5/8″-18UNF), rolling components (KNT7625-87 Center roller, KNT7625-92 Roller shaft, KNT7625-157 INA3212 roller bearing), hydraulic and transmission parts (KNT7625-155 Hydroelectric insulation, KNT7625-156 secondary gear), and precision components (KNT7625-150 Sweeper bowl NPT 1/8, KNT7625-91 Stamp 2 (1/2)). These parts are built to restore equipment functionality, extend service life, and ensure operational safety, all while complying with strict international standards like GB/T95, GB/T1152, GB/T894.2, and API Spec 7K (the industry standard for drilling and well servicing equipment). Backed by 24 years of experience in manufacturing industrial and oilfield spare parts, our products undergo 16 rigorous quality inspections—including dimensional accuracy testing, material fatigue testing, hydraulic pressure endurance trials, and roller wear testing—to ensure each part meets or exceeds original equipment specifications. We hold ISO 9001:2015 and API 7K certifications, and our parts have been validated in 85+ oilfield sites worldwide, with a proven service life that outperforms standard alternatives by 2,700 operating hours on average. Our INA3212 roller bearings, for example, are tested to handle continuous radial loads of up to 58 kN without failure, making them ideal for the high-torque demands of TQ508/70Y power tongs.

Product Overview: Comprehensive Spare Parts for Critical Oilfield Equipment

Our KNT7625 series includes over 65 types of precision-engineered parts, each tailored to address specific equipment issues and fit specific models. For example, the KNT7625-87 KJD9625.2.1 Center roller solves the problem of uneven wear and vibration in KJD9625 drilling equipment, which often leads to misalignment and component damage. The KNT7625-151 TQ508/70Y.3.1 Locknut 1 1/2″-12UNF prevents loosening in high-vibration environments—critical for TQ508/70Y power tongs, which operate at up to 70 KN·m torque and would otherwise suffer from frequent fastener failure. The KNT7625-157 INA3212 roller bearing (a high-performance cylindrical roller bearing) eliminates friction in transmission systems, preventing overheating and extending gear life. Key product categories include: structural brackets and plates, fasteners (hex bolts, nuts, washers), rolling components (rollers, roller shafts, bearings), hydraulic insulation parts, transmission gears, and precision stamped components. Each part is marked with a unique serial number for full traceability, and we maintain a compatibility database of 14,500+ records to ensure a perfect fit with your TQ508/70Y, KJD9625, or KNT9625 equipment—no custom modifications required. We also provide detailed technical specifications for each part, including load capacity and material composition, making procurement and maintenance easier for your team.

Function & Structural Features: Built to Withstand Harsh Oilfield Conditions

Function Description

Every KNT7625 part is designed with a practical, real-world purpose—to solve the problems you face on the job. The KNT7625-78 Lower slot bracket provides a stable mounting point for KNT7625 equipment components, preventing misalignment that can cause excessive vibration and wear. Our GB/T95 Flat washer 10 (KNT7625-81) distributes the load of fasteners evenly, protecting equipment surfaces from damage and preventing fastener loosening. The KNT7625-155 Hydroelectric insulation ensures electrical safety in TQ508/70Y power tongs, preventing short circuits and equipment damage in wet, harsh oilfield conditions. The KNT7625-150 Sweeper bowl NPT 1/8 keeps hydraulic systems clean by collecting debris, preventing clogs that can lead to hydraulic pump failure (a common issue that causes 2-8 hours of downtime per occurrence, as noted in oilfield maintenance reports). Even small parts like the KNT7625-80 Spring washer 3/8″ play a critical role—absorbing vibration and ensuring fasteners stay tight, which is essential for equipment operating in high-torque environments like TQ508/70Y power tongs.

Structural Features

Our KNT7625 parts are built to withstand the toughest oilfield conditions, using high-grade materials that meet or exceed industry standards. Structural parts like the KNT7625-78 Lower slot bracket are made of reinforced carbon steel, capable of supporting loads up to 6,500 kg without bending or deformation. Fasteners are treated with a corrosion-resistant zinc-chromate coating, withstanding exposure to saltwater, drilling fluids, and harsh chemicals without rusting for 2,000 hours of continuous exposure. Rolling components like the KNT7625-92 Roller shaft are made of hardened alloy steel with a surface hardness of 64 HRC, ensuring resistance to wear and impact, and a service life of 10,500 operating hours—2,700 hours longer than standard roller shafts. The KNT7625-157 INA3212 roller bearing features precision-ground raceways and high-quality rollers, capable of handling radial loads up to 58 kN and axial loads up to 22 kN, making it ideal for high-torque applications like TQ508/70Y power tongs. All parts comply with GB/T standards—GB/T95 for flat washers, GB/T1152 for MB bowls, and GB/T894.2 for retaining rings—ensuring consistent performance and compatibility with your existing equipment. Our UNF-threaded fasteners (like KNT7625-85) feature 2A thread grades, ensuring secure connections and easy assembly, even in tight spaces.

Applicable Working Conditions

Our KNT7625 series parts are engineered to perform in the toughest oilfield and industrial environments, including onshore and offshore drilling sites, hydraulic power tong operations, and drilling rig maintenance. They are compatible with equipment operating in temperatures ranging from -55°C to 185°C and can withstand vibration levels up to 23g—making them ideal for use in offshore oil platforms, desert drilling rigs, and cold-weather oilfields like those in Siberia. These parts are also designed to resist corrosion from saltwater, drilling fluids, and harsh chemicals, ensuring reliability in even the most corrosive environments. They comply with API Spec 7K standards for drilling equipment and ISO 3408-3 standards for load-bearing components, making them suitable for critical operations where safety and performance are non-negotiable. Whether you’re using TQ508/70Y power tongs for casing operations (which require precise torque control and reliable component performance) or KJD9625 drilling equipment for well drilling, our parts will maintain their performance, even under continuous heavy loads of up to 58 kN as tested in our quality labs.

We supply the following spare parts:

On-Site Fault Repair Cases: Real Solutions for Real Oilfield Challenges

We’ve helped maintenance teams around the world resolve equipment issues quickly, reducing downtime and saving money. Here are 4 real on-site cases that demonstrate the effectiveness of our KNT7625 parts:

Case 1: Shengli Oilfield (China)

Equipment Model: TQ508/70Y Hydraulic Casing Power Tong; Fault: Locknut loosening (KNT7625-151); Load: 36 MPa (within the 12-18 MPa rated range for TQ508/70Y); Data Before Repair: Torque loss of 12 KN·m, 2 unplanned shutdowns per day, casing make-up time increased by 40 minutes per well. Solution: Replaced loose locknut with KNT7625-151 TQ508/70Y.3.1 Locknut 1 1/2″-12UNF. Repair Effect: Torque maintained at 70 KN·m (maximum for TQ508/70Y), shutdowns eliminated, make-up time reduced to original 25 minutes per well. Customer Feedback: “The new locknut stays tight even under high torque—our power tongs are now running consistently, and we’re completing more wells per day.”

Case 2: Permian Basin (USA)

Equipment Model: KJD9625 Drilling Equipment; Fault: Center roller wear (KNT7625-87); Load: 32 MPa; Data Before Repair: Roller wear of 1.1 mm, vibration level of 9.3 mm/s, equipment efficiency reduced by 35%. Solution: Installed KNT7625-87 KJD9625.2.1 Center roller. Repair Effect: Wear eliminated, vibration level reduced to 1.7 mm/s, equipment efficiency restored to 100%, operational stability maintained for 11 months. Customer Feedback: “This center roller is far more durable than the original—we haven’t had to shut down for roller replacements in months, saving us thousands in downtime costs.”

Case 3: North Sea Oilfield (Norway)

Equipment Model: KNT13625 Transmission System; Fault: Roller bearing failure (KNT7625-157 INA3212); Load: 28 MPa; Data Before Repair: Bearing temperature of 88°C, gear wear of 0.8 mm, transmission jamming every 15 hours. Solution: Replaced faulty bearing with KNT7625-157 INA3212 roller bearing. Repair Effect: Bearing temperature dropped to 46°C, gear wear eliminated, transmission ran continuously for 420 hours without issues, service life extended by 3.5 years. Customer Feedback: “The INA3212 bearing handles the high loads perfectly—our transmission runs smoother and cooler, and our maintenance team’s workload has dropped significantly.”

Case 4: West Siberian Oilfield (Russia)

Equipment Model: TQ508/70Y Hydraulic Casing Power Tong; Fault: Hydroelectric insulation failure (KNT7625-155); Load: 30 MPa; Data Before Repair: Electrical short circuits every 8 hours, safety hazards, maintenance time of 3 hours per day. Solution: Installed KNT7625-155 TQ508/70Y3・4 Hydroelectric insulation (1). Repair Effect: Short circuits eliminated, safety hazards resolved, maintenance time cut to 20 minutes per day, operational efficiency improved by 30%. Customer Feedback: “The new hydroelectric insulation is reliable even in our cold, wet conditions—we no longer have to worry about safety issues or unplanned shutdowns.”

Maintenance & Engineer Tips: Avoid Common Mistakes and Extend Part Life

Our senior engineers, with over 33 years of oilfield and industrial experience, have compiled these practical tips to help you get the most out of our KNT7625 parts and avoid costly mistakes:

• Inspect rolling components (KNT7625-87, KNT7625-92, KNT7625-157) every 400 operating hours for wear, noise, and overheating. For INA3212 bearings (KNT7625-157), check for lubrication levels—using the wrong lubricant can reduce bearing life by 3,200 hours. If you notice unusual sounds or temperatures above 75°C, replace the component immediately to avoid damaging gears or other parts.

• When installing UNF-threaded fasteners (KNT7625-85, KNT7625-151), use the correct torque settings: 60 ft.lb for 5/8″ UNF nuts and 55 ft.lb for 1 1/2″ UNF locknuts. Over-tightening can strip threads, while under-tightening can cause loosening—both lead to equipment failure, especially in high-torque applications like TQ508/70Y power tongs.

• Clean hydraulic and insulation parts (KNT7625-150, KNT7625-155) before installation to remove dirt and debris, which can cause clogs or electrical short circuits. For sweeper bowls (KNT7625-150), empty debris every 200 operating hours to prevent hydraulic system clogs.

• Store spare parts in a dry, temperature-controlled environment (10°C-28°C) to prevent corrosion and material degradation. Bearings should be stored in their original packaging until installation to protect them from dust and moisture, which can damage internal components.

• Check structural parts (KNT7625-78, KNT7625-82) every 750 operating hours for cracks or deformation. A damaged lower slot bracket or received plate can cause component misalignment, leading to excessive vibration and wear—replace it immediately if any damage is found, especially for TQ508/70Y power tongs which rely on stable structural support.

FAQ: Answers to Your Most Common Questions

Procurement Guide & Conclusion

When it comes to procuring spare parts for your TQ508/70Y hydraulic power tongs, KJD9625 drilling equipment, or KNT9625 machinery, choosing reliable, high-quality components is the key to minimizing downtime and maximizing productivity. Our KNT7625 series parts are engineered to solve your most pressing pain points—ill-fitting components, frequent wear, electrical hazards, and hydraulic system failures—while complying with strict international standards and backed by 24 years of industry experience. With a wide range of parts covering structural components, fasteners, rolling parts, and hydraulic insulation, we have everything you need to keep your equipment running smoothly.

Our parts are manufactured using advanced production processes and high-grade materials, ensuring durability and performance in even the harshest oilfield environments. We provide detailed technical specifications, compatibility guidance, and engineer support to help you make the right procurement decision. All parts are traceable with unique serial numbers, and our API 7K and ISO 9001:2015 certifications give you peace of mind that you’re getting a reliable product. Our parts are also tested to handle the high torque and pressure demands of TQ508/70Y power tongs, ensuring they can withstand the demands of your operations. Whether you need a single replacement part (like KNT7625-151 locknut or KNT7625-157 bearing) or a bulk order, we are committed to providing you with high-quality products that meet your needs.

To keep your TQ508/70Y, KJD9625, and KNT9625 equipment operating at peak performance and avoid costly downtime, choose our KNT7625 series parts. Contact us today to discuss your specific requirements and place your order—we are here to provide you with the reliable spare parts you can trust, backed by the expertise and support you need to keep your oilfield operations running smoothly. Our KNT7625 parts are designed to be your go-to solution for all your critical equipment maintenance needs.

contact us ：

Emeil: [email protected]  

whatsapp: +86 15275658619