KHT5500-282(2) Front Jaw Set & XYQ6B Series Oilfield Power Tong Accessories Supply

Introduction: Dependable Accessories for Oilfield Power Tongs & Hydraulic Pliers

In the high-pressure, high-stakes world of oil and gas drilling, every component—from a small KHT5500-86 Spring washer 5/8″ to a precision KHT5500-282(2) Front jaw set assembly—directly impacts your operational efficiency and safety. Our product range is specifically engineered to fit and enhance the performance of the equipment you rely on daily: KHT5500 series power tongs and backup tongs, XYQ6B and XQ89/3YC series pipe and tubing power pliers, and hydraulic pliers with pipe taper end fastener hole M8T5. Our core purpose is to solve the biggest pain points for oilfield operators, drilling contractors, and maintenance teams: frequent part failures, mismatched components, and unplanned downtime that cuts into productivity and profits. Whether you’re running tubing operations in the Permian Basin, casing work in the Gulf of Mexico, or well workover in the North Sea, our accessories ensure your equipment runs smoothly, safely, and efficiently—no more waiting for ill-fitting parts or dealing with premature failures that derail your schedule.

Product Overview: High-Quality Oilfield Accessories Built for Durability

Our product lineup covers every critical accessory needed for pipe and tubing power pliers, backup tongs, and hydraulic pliers, all manufactured to meet or exceed strict industry standards like GB/T70.1-2000, GB/T882, GB/T91, GB/T118-2000, GB/T305, GB/T10708.1, and GB/T15242.2. We also comply with international standards such as SAE J429 for fasteners and API Spec Q1 (10th edition) for oilfield equipment—an industry-specific quality management standard that goes beyond ISO 9001 by prioritizing oil and gas industry risks, strict calibration requirements, and 10-year records retention. With 19 years of hands-on experience supplying oilfield accessories, we hold ISO 9001, ISO 14001, and ISO 45001 certifications, and our products are rigorously tested under real-world conditions. For example, our KHT5500-282(2) Front jaw set assembly lasts 7,900 operating hours, and the GB/T10708.1 YO-Ring Y63x53x6.3 (a one-way reciprocating rubber seal) maintains a leak-proof seal under 38 MPa pressure, outperforming generic alternatives by 2,100 hours and 5 MPa respectively.

Key Product Features & Pain Point Solutions

1. Structural Characteristics

Every component is designed for durability and longevity, addressing the common issue of premature wear and failure. The KHT5500-282(2) Front jaw set assembly is made with heat-treated alloy steel, precision-ground to ensure a tight grip on pipes and resisting wear for 7,900 operating hours—2,100 hours longer than standard jaw sets. Our XYQ6B safety door shaft (pipe oil power pliers accessory) is forged from high-strength steel, with a smooth surface finish that prevents jamming, a common problem that causes safety door failures. The GB/T10708.1 YO-Ring Y63x53x6.3 is crafted from oil-resistant rubber, engineered to meet the standard’s requirements for one-way reciprocating seals, maintaining a tight seal even under 38 MPa pressure and solving hydraulic leak issues. Even small parts like the KHT5500-76 Hexagon bolt 3/8″x1/2″ are zinc-plated and heat-treated to HRC 30-33, preventing rust and seizing in corrosive oilfield environments.

2. Functional Advantages

Our accessories are engineered to make your work easier and more efficient, solving daily operational frustrations. The KHT5500-197 Right-angle connector (NPT1/2-3/4-16UNF Flared type) features a leak-proof flared design, eliminating fluid leaks at connection points that waste time and risk equipment damage. The pipe oil power clamp fittings pressure gauge 16-60KN.m provides accurate torque readings within ±0.2 KN.m, preventing over-tightening or under-tightening of pipe connections—which often leads to leaks or pipe damage. The XYQ6B power tube seat (oil power pliers accessory) ensures stable hydraulic flow, reducing pressure drops by 0.8 MPa and improving tool responsiveness. Our KHT5500-71 Alignment shaft guarantees precise alignment of power tong components, reducing wear on gears and extending the overall life of the equipment by 3,500 hours.

3. Applicable Working Conditions

Our accessories are built to perform in the harshest oilfield environments, from onshore shale plays to offshore platforms. They withstand extreme temperatures (ranging from -42℃ in the Bakken Shale to +105℃ in the Middle East), high humidity, and corrosive exposure to drilling fluids and seawater. Whether you’re operating in the dusty Permian Basin, the salty Gulf of Mexico, or the cold North Sea, our components will hold up—reducing the need for frequent replacements and unplanned maintenance. They’re compatible with well workover, casing, and tubing operations, and they meet the torque requirements of 16-60KN.m pressure gauges, making them a versatile solution for all your drilling needs.

We supply the following spare parts:

On-Site Fault Repair Cases (Real Oilfield Scenarios)

We’ve helped oilfield teams around the world resolve critical equipment issues with our high-quality accessories. Here are 4 real cases that demonstrate how our products deliver tangible results, straight from the rig floor:

Case 1: Permian Basin, Texas – Jaw Set Wear in Power Tong

Location: Permian Basin, Texas | Equipment: KHT5500 power tong | Load: 3700 N·m torque | Fault: Original front jaw set wore out after 5,800 hours, causing pipe slippage and 5 hours of downtime. Our Solution: KHT5500-282(2) Front jaw set assembly. Repair Result: Jaw set lasted 7,900 hours, no pipe slippage, and replacement frequency reduced. Customer Feedback: “The new jaw set is far more durable—we’re saving time on replacements and avoiding costly pipe damage.”

Case 2: Gulf of Mexico Offshore Rig – Hydraulic Leak

Location: Gulf of Mexico Offshore Rig | Equipment: XYQ6B pipe oil power pliers | Load: 32 MPa hydraulic pressure | Fault: Generic YO-ring leaked, causing 4.5 hours of downtime to repair. Our Solution: KHT5500-462 GB/T10708.1 YO-Ring Y63x53x6.3. Repair Result: Seal maintained a tight leak-proof seal for 11 months, no further downtime. Customer Feedback: “These seals hold up in the salty air better than any we’ve used—no more wasted time on leaks or fluid loss.”

Case 3: Bakken Shale, North Dakota – Safety Door Shaft Jamming

Location: Bakken Shale, North Dakota | Equipment: XYQ6B pipe oil power pliers | Load: 2800 N·m torque | Fault: Safety door shaft jammed, preventing tool operation and causing 6 hours of downtime. Our Solution: XYQ6B safety door shaft (pipe oil power pliers accessory). Repair Result: Shaft operated smoothly for 8,200 hours, no jamming. Customer Feedback: “The new shaft is smooth and reliable—we haven’t had a single jam, and our safety protocols are easier to follow.”

Case 4: North Sea Offshore Platform – Pressure Gauge Inaccuracy

Location: North Sea Offshore Platform | Equipment: Pipe oil power clamp | Load: 45 KN.m torque | Fault: Generic pressure gauge was inaccurate (±0.8 KN.m), leading to over-tightened pipes and 3 hours of downtime. Our Solution: Pipe oil power clamp fittings pressure gauge 16-60KN.m. Repair Result: Gauge provided accurate readings (±0.2 KN.m), no pipe damage in 10 months. Customer Feedback: “The accurate gauge has eliminated over-tightening issues—we’re saving money on pipe replacements and working more safely.”

Maintenance & Engineer Tips (Practical, On-Site Advice)

Our senior oilfield engineers, with 25+ years of on-site experience, have compiled these practical tips to help you maximize the life of your accessories and avoid common pitfalls—advice you can use directly on the rig:

• Inspect the KHT5500-282(2) Front jaw set assembly every 1,100 operating hours—replace if the wear depth exceeds 1.0 mm (worn jaw sets cause pipe slippage and damage).

• Clean the KHT5500-462 GB/T10708.1 YO-Ring every 2 months—debris in the seal groove reduces its lifespan by 50%, so use a non-corrosive cleaner to protect the rubber material.

• Lubricate the XYQ6B safety door shaft every 400 operating hours with ISO VG 46 grease—dry shafts jam easily, which can lead to safety hazards and downtime.

• Calibrate the pipe oil power clamp pressure gauge every 6 months—API Spec Q1 requires strict calibration of monitoring equipment, and an uncalibrated gauge can cause costly errors.

• Store fasteners (like KHT5500-76 Hexagon bolt and GB/T70.1-2000 Screw M12X30) in a dry, sealed container—even zinc-plated fasteners rust in moist, salty environments, leading to seizing.

FAQ (Frequently Asked Questions)

Purchase Guide & Conclusion

When it comes to oilfield accessories, reliability and compatibility are non-negotiable—every minute of downtime costs you money, and every faulty part puts your team at risk. Our comprehensive product range—including KHT5500-282(2) Front jaw set assembly, XYQ6B series accessories, GB/T10708.1 YO-Rings, and more—solves your most pressing pain points: unplanned downtime, frequent part failures, and mismatched components. Each part comes with detailed technical specifications and maintenance guides, aligned with API Spec Q1 requirements, giving you a reliable procurement reference and a practical technical resource for on-site repairs. Our 19 years of oilfield experience, strict compliance with industry standards, and ISO certifications ensure you’re getting high-quality products that deliver long-term value and peace of mind.

If you’re tired of dealing with low-quality accessories that cost you time and money, choose our products. We supply all the components listed—from KHT5500-86 Spring washer 5/8″ to KHT5500-282(2) Front jaw set assembly—and more. Contact us today to discuss your specific needs, and let us help you reduce downtime, improve efficiency, and keep your oilfield operations on track. We’re committed to providing the best products and support to help you succeed in the tough oilfield environment, with every component built to perform when you need it most.

contact us ：

Emeil: [email protected]  

whatsapp: +86 15275658619