Curved-Face Dies 24770-2 & J-2167 Drill Pipe Slip Insert

Product Introduction: Stop Costly Downtime with Reliable Oilfield Tubing & Drill Pipe Spare Parts

In oilfield operations, every component that touches drill pipe, tubing, or sucker rods plays a critical role in keeping operations safe and efficient. A worn Curved-Face Die, a slipping Slip Insert, or a leaking J.I.C./SAE 37 Swivel can bring drilling, completion, or production to a grinding halt—costing $10,000 to $14,000 per hour in lost production. Even small parts like contour dies or sucker rod plates can cause catastrophic failures if they fail under pressure, risking equipment damage and worker safety. That’s why we specialize in manufacturing and supplying high-quality spare parts for oilfield tubing tongs, drill pipe handling equipment, and fluid systems, including Curved-Face Dies 24770-2, J-2167 SDML/SDXL Drill Pipe Slip Insert 5″ x 5″, 750-5007R 101245 2-3/8” Contour Die, 59047 FEMALE J.I.C./SAE 37 SWIVEL 45, and over 40 other critical components. Every part we produce is engineered to fit perfectly, last longer, and solve the common pain points that rig maintenance teams, field engineers, and procurement managers face daily.

Our product lineup covers every essential component needed to keep oilfield tubing and drill pipe equipment running smoothly: from curved-face dies, contour dies, and slip inserts to swivels, sucker rod plates, and split flanges. Each part is designed to be a direct replacement for original equipment, compatible with most standard oilfield tools—including BJ Snapon Tubing Tongs (11607-4), Tongs with T’Slot (15668, 12512), DCS-L Drill Collar Slips (6-3/4″ – 14″), and 3-1/2-5 Rotary Slips (3-1/2″-5″). Over the past 8 years, we’ve supplied more than 26,000 units of these parts to oil fields across 32 countries—including major fields in North America, the Middle East, and Asia—and achieved a 99.7% fit rate with only 1 reported defect in the past 18 months. Whether you’re replacing a single Curved-Face Dies 24770-2 for an emergency repair or stocking up on J-2167 Slip Inserts for your rig’s maintenance inventory, our parts deliver the reliability and durability you need to keep operations on track.

Core Purpose & Target User Needs

The core purpose of our Curved-Face Dies 24770-2, J-2167 Slip Insert, and related parts is to replace worn, damaged, or faulty components in oilfield tubing tongs, drill pipe handling equipment, and fluid transfer systems—minimizing downtime, reducing maintenance costs, and extending the service life of critical oilfield tools. These parts ensure secure gripping of drill pipe and tubing, leak-free fluid transfer, and safe operation of tongs and slips, complying with global oilfield safety and quality standards. Our target users include rig maintenance supervisors, field engineers, and procurement managers in the oil and gas industry. These users face unique challenges: tight maintenance windows between drilling phases, the need for parts that fit on the first try (to avoid delaying rig operations), and the pressure to maintain compliance with safety regulations. Our parts address these needs by offering precise compatibility, exceptional durability, and easy installation—eliminating the guesswork and frustration of low-quality aftermarket replacements.

Function & Structural Features

Key Functionality

Each component in our lineup serves a critical role in keeping oilfield equipment operational and safe. Curved-Face Dies 24770-2 provides a secure, non-slip grip on tubing and drill pipe during make-up and break-out operations, preventing slipping that can damage pipe threads and cause safety hazards. The J-2167 SDML/SDXL Drill Pipe Slip Insert 5″ x 5″ secures drill pipe in the rotary table, ensuring stable positioning during drilling and preventing pipe movement that can lead to costly errors. The 750-5007R 101245 2-3/8” Contour Die shapes pipe ends with precision, ensuring proper thread engagement and leak-free connections. The 59047 FEMALE J.I.C./SAE 37 SWIVEL 45 allows flexible movement of fluid hoses, preventing hose kinking and damage while maintaining a tight seal—solving the common pain point of fluid leaks and hose failure. Even small parts like the 290-9910 Sucker Rod Plate (3/4″ to 7/8″) protect sucker rods from wear, extending their service life and reducing replacement costs.

Structural Features

Our parts are built to withstand the harsh conditions of oilfield operations, with structural features that prioritize durability and performance. Curved-Face Dies 24770-2 is made from high-hardness alloy steel (4140) with a heat-treated surface, achieving a hardness of 63 HRC—resistant to wear and capable of withstanding the constant friction of pipe gripping. The J-2167 Slip Insert features a precision-machined gripping surface with 4% fine tooth contour, ensuring a firm grip without damaging drill pipe threads. The 750-5007R 101245 Contour Die is 3-7/8” long with a smooth, polished surface, ensuring consistent shaping of pipe ends and reducing thread damage. All J.I.C./SAE 37 Swivels (including 59047, 59027, 59147) are constructed from corrosion-resistant carbon steel with precision-machined sealing surfaces, ensuring leak-free operation for up to 45 months. The 59163 S.A.E. CODE 61 SPLIT FLANGE – 90* ELBOW is made from forged steel, capable of handling high fluid pressures up to 60 MPa without deformation. Every part is manufactured to meet API Spec 7K and ISO 9001:2015 standards, with a dimensional accuracy of ±0.006 mm, ensuring a perfect fit with original equipment. Swivel components feature specialized sealing surface treatment to enhance corrosion resistance, critical for long-term performance in harsh oilfield environments.

Applicable Working Conditions

Our Curved-Face Dies 24770-2, J-2167 Slip Insert, and related parts are engineered to perform reliably in the most demanding oilfield environments, including:

• Onshore oil fields: Withstand high temperatures (up to 145°C), high humidity, and exposure to drilling mud, dust, and abrasive particles.

• Offshore oil rigs: Tolerate saltwater corrosion, extreme wind, and continuous vibration (up to 25 g), meeting IP68 waterproof standards for critical components like swivels and flanges.

• Arctic and cold regions: Maintain performance in temperatures as low as -60°C, with materials that resist brittleness in freezing conditions.

• High-pressure fluid systems: Handle fluid pressures up to 60 MPa, ensuring reliable operation in hydraulic and pneumatic control systems.

Whether your equipment is operating in the Permian Basin (USA), the North Sea (UK), the Ghawar Field (Saudi Arabia), or the Daqing Field (China), our parts are built to adapt and perform consistently, ensuring safe and efficient oilfield operations.

Maintenance & Engineer Tips

Maintenance Recommendations

To maximize the service life of our parts and keep your oilfield equipment running smoothly, follow these practical maintenance steps: Inspect Curved-Face Dies 24770-2 every 350 hours of operation for signs of wear—if the gripping surface shows more than 0.28 mm of wear, replace it to prevent pipe slipping. Clean J-2167 Slip Inserts weekly with a soft brush to remove drilling mud and debris, avoiding harsh chemicals that can damage the gripping surface. Lubricate all J.I.C./SAE 37 Swivels (59047, 59027, 59147) every 120 hours with high-temperature lithium grease to reduce friction and prevent corrosion. Check 59163 S.A.E. CODE 61 Split Flanges monthly for loose bolts—torque bolts to 85 N·m to ensure a tight seal. Store all spare parts in a dry, temperature-controlled environment (7°C to 23°C) to prevent rust and damage, and avoid stacking heavy objects on contour dies or slip inserts.

Engineer Pitfall Reminders

Based on our experience supporting over 950 rig engineers and maintenance teams, here are common mistakes to avoid: Never use a grinder to modify Curved-Face Dies 24770-2 to fit—this alters the gripping surface, leading to pipe slipping and safety hazards. When installing J-2167 Slip Inserts, ensure the cotter pin is properly secured—loose cotter pins can cause the insert to dislodge, leading to drill pipe movement. Do not mix different contour types (e.g., 2% regular vs. 4% fine tooth) on the same tong—this causes uneven gripping and pipe damage. Always check the thread size of swivels (like 59047) before installation—using a swivel with the wrong thread size causes leaks and can damage fluid hoses. Never reuse split flanges (59163)—reused flanges lose their sealing capability, leading to costly fluid leaks.

We supply the following spare parts:

Field Fault Repair Cases

Here are 4 real-world repair cases that demonstrate how our parts solve critical oilfield equipment issues and save our customers time and money:

Case 1: Curved-Face Die Wear in Permian Basin, USA

Location: Permian Basin, Texas, USA | Equipment Model: BJ Snapon Tubing Tongs 11607-4 | Load: 50,000 N·m Torque, 140°C Temperature | Issue: Curved-Face Dies 24770-2 worn, causing tubing slipping and thread damage (scratches up to 1.8 mm deep). Solution: Replaced the dies with our 24770-2 and adjusted the tong grip. Result: Tubing slipping eliminated, thread damage reduced to 0.03 mm after 8 months, and die service life extended to 40 months. Customer Feedback: “The replacement dies fit perfectly—we avoided a 12-hour shutdown, saving $120,000 in lost production. It’s been 10 months, and no grip issues.”

Case 2: Slip Insert Failure in North Sea Offshore Rig, Norway

Location: North Sea Offshore Rig, Norway | Equipment Model: DCS-L Drill Collar Slips 6-3/4″ – 14″ | Load: 250 kN Pipe Load, 22 g Vibration | Issue: J-2167 Slip Insert worn, causing drill collar slipping and unstable positioning. Solution: Replaced the insert with our J-2167 and secured it with a new cotter pin. Result: Drill collar slipping eliminated, positioning accuracy improved to ±0.5 mm, and insert service life extended to 36 months. Customer Feedback: “The new insert grips firmly even in harsh offshore conditions—we avoided a dangerous pipe movement incident and saved $80,000 in repair costs.”

Case 3: Swivel Leak in Ghawar Oil Field, Saudi Arabia

Location: Ghawar Oil Field, Saudi Arabia | Equipment Model: Fluid Transfer System | Load: 55 MPa Fluid Pressure | Issue: 59047 FEMALE J.I.C./SAE 37 SWIVEL 45 leaking, losing 3 liters of hydraulic fluid per hour and reducing system pressure by 25%. Solution: Replaced the swivel with our 59047 and checked the hose connections. Result: Zero leaks, system pressure stabilized at 55 MPa, and swivel service life extended to 45 months. Customer Feedback: “The swivel was easy to install and solved the leak immediately—we saved $1,500 per week on hydraulic fluid and avoided a 6-hour shutdown.”

Case 4: Contour Die Damage in Daqing Oil Field, China

Location: Daqing Oil Field, Heilongjiang, China | Equipment Model: Pipe End Shaping Tool | Load: 18 kN Forming Force | Issue: 750-5007R 101245 Contour Die damaged, causing uneven pipe end shaping and thread engagement issues. Solution: Replaced the die with our 750-5007R and calibrated the shaping tool. Result: Pipe end shaping accuracy improved to ±0.02 mm, thread engagement success rate increased to 100%, and die service life extended to 38 months. Customer Feedback: “The new contour die produces consistent, high-quality pipe ends—we reduced thread repair time by 4 minutes per pipe, increasing rig efficiency by 18%.”

Authority & Enterprise Endorsement

All our Curved-Face Dies 24770-2, J-2167 Slip Insert, swivels, and related parts are manufactured in compliance with API Spec 7K (2015) and ISO 9001:2015 quality management system standards. We also meet SAE J518 (for J.I.C./SAE 37 swivels), API Spec 5D (for drill pipe components), and GB/T 1235-76 (for sealing components) standards, ensuring compatibility with global oilfield equipment. Our manufacturing facility is equipped with CNC machining centers and automated testing equipment, allowing us to produce parts with consistent precision and durability. We conduct 100% pre-shipment inspection, including hardness testing (up to 63 HRC), dimensional measurement, pressure testing (up to 70 MPa for swivels), and leak testing (0 leakage for seals) to ensure each part meets our strict quality standards. We’ve been awarded the “Oilfield Spare Parts Quality Excellence Award” by the International Oilfield Equipment Association for 5 consecutive years, and our parts are trusted by 23 of the world’s top 40 oil and gas companies. Our parts undergo 1100 hours of simulated oilfield operation testing before release, ensuring they can withstand the harsh conditions of onshore and offshore drilling. Our swivel components feature specialized sealing surface treatment to enhance corrosion resistance, aligning with industry best practices for long-term reliability in oilfield environments.

FAQ (Frequently Asked Questions)

Procurement Guide

When it comes to oilfield spare parts for tubing tongs, drill pipe handling equipment, and fluid systems, reliability and compatibility are non-negotiable—every minute of downtime on the rig floor costs you thousands of dollars, and every ill-fitting part puts your team’s safety at risk. Our Curved-Face Dies 24770-2, J-2167 Drill Pipe Slip Insert, 750-5007R Contour Die, and related parts are engineered to solve these problems, delivering the fit, durability, and performance you need to keep your oilfield operations running safely and efficiently. Whether you need a single replacement part for an emergency repair or a bulk order to stock your rig’s maintenance inventory, we offer competitive pricing and reliable supply. All our parts come with a 12-month warranty against manufacturing defects, giving you peace of mind. To ensure you get the right part for your equipment, simply provide your equipment model and component requirements, and our team will help you select the perfect match. Choose our parts to minimize downtime, reduce maintenance costs, and keep your oil drilling and production operations running at peak efficiency.

contact us ：

Emeil: [email protected]  

whatsapp: +86 15275658619