7704-A-35 “UC-3” Casing Slips, SDML 15569-1 SD Type Rotary Slips

Introduction: Eliminate Drilling Downtime with Precision-Crafted Oil Drilling Accessories

For drilling operators, maintenance technicians, and well service teams working in onshore shale gas fields, offshore platforms, and conventional oilfields, the reliability of casing slips, rotary slips, and their supporting components is non-negotiable. A single faulty latch, worn insert, or bent hinge pin can trigger unplanned downtime—costing an average of $9,800 per hour for onshore rigs and $38,000 per hour for offshore operations, based on field data from global oil and gas projects. This risk is even more critical in shale gas fields, where over 30% of horizontal wells experience casing deformation during hydraulic fracturing, leading to reduced production and shortened well life. Our comprehensive range of oil drilling accessories, including the 12 3/4” O.D. 10/7704-A-35 “UC-3” Casing Slips, 5” O.D. SDML 15569-1 “SD” Type Rotary Slips (Less Inserts), 14-631-444 “CMS-3” Taper Casing Slips, and over 45 other critical components, is engineered to solve these pain points. All products fully comply with API Spec 7K:2015, NACE MR0175/ISO 15156, and ISO 9001:2015 standards, with each component undergoing 14 rigorous quality checks—including material composition testing, load-bearing trials, and corrosion resistance assessments—before leaving the factory. Our core purpose is to provide perfectly compatible, durable accessories that fit specific equipment models (such as HT-100 & HT-65 tongs, “C-1” drill collar slip systems, and DU/TS-100 slip assemblies), addressing the细分 needs of drillers who require reliable parts to maintain operational continuity, reduce maintenance costs, and avoid costly downtime. Whether you need replacement inserts, hinge pins, or complete slip assemblies, our products are designed to match original equipment specifications, ensuring seamless integration and long-lasting performance in even the most challenging drilling environments.

Product Overview & Core Functions

Key Product Models & Compatibility

Each accessory in our lineup is precision-engineered to fit specific drilling equipment, solving common operational pain points that disrupt rig efficiency:

• 7704-A-35 “UC-3” Casing Slips: This 12 3/4” O.D. casing slip is designed for heavy-duty casing running operations, compatible with 10-inch casing and supporting loads up to 520 tons. It eliminates the risk of casing slippage and deformation—critical in shale gas fields where hydraulic fracturing-induced fault slip often causes casing damage. It works seamlessly with renewable liners (7638-116) to extend service life.

• SDML 15569-1 “SD” Type Rotary Slips: These 5” O.D. rotary slips (Less Inserts) are compatible with most standard rotary tables, supporting drill pipe sizes from 2 7/8” to 5”. They replace worn slips that cause pipe rotation during drilling, reducing the risk of wellbore damage and tool loss, and pair perfectly with 34-209 4 1/2” X 4 1/2” inserts and 34-205 3 1/2” X 3 1/2” inserts.

• 14-631-444 “CMS-3” Taper Casing Slips: A 28-inch model with a 3”/ft taper, these casing slips are ideal for mid-to-large size wells, supporting loads up to 480 tons. They feature a multi-segment design that distributes pressure evenly, preventing casing deformation—a common issue in high-stress shale gas environments.

• Other Critical Components: 7638-5108 “C-1” Drill Collar Slips (8 1/2” – 10”), Hinge Pin 707-000-0100, E940308-1 Grease Fitting, 21-109-DSET Inserts, and T200668-SH Set Back Hanger (for HT-100 & HT-65 Tongs) complete the system, ensuring every part works in harmony to avoid single-point failures.

Structural Features & Advantageous Design

Every accessory is built with field usability and durability in mind, addressing the most frustrating pain points drillers face daily—especially in high-stress shale gas operations:

• High-Strength Alloy Steel Construction: All slip segments, hinge pins, and shafts are made of AISI 4140 heat-treated alloy steel, with a hardness rating of 30-34 HRC. This material withstands 170,000+ cycles of use without deformation, compared to the industry average of 90,000 cycles—meaning fewer replacements and less downtime, even in high-stress fracturing environments.

• Precision Dimensional Accuracy: Each component is machined to a tolerance of ±0.003 inches, ensuring a perfect fit with original equipment. The 7704-A-35 “UC-3” Casing Slips, for example, have a surface finish of Ra 0.6 μm, reducing friction between the slip and casing by 40% and minimizing the risk of casing damage during high-pressure fracturing.

• Corrosion & Wear Resistance: All exposed components feature a zinc-nickel coating (14-17 μm thick) and are treated with high-temperature, anti-corrosion grease, complying with NACE MR0175/ISO 15156 standards for use in sour gas wells (H₂S content up to 20,000 ppm) and offshore environments. This coating prevents corrosion caused by salt spray and high-humidity shale gas field conditions.

• Easy Installation & Maintenance: Components like the 3769 Handle Pin (w/ Washer & Cotter) and 7624-A-4 Insert (w/ Cotter) are designed for quick, tool-free replacement, saving 18 minutes per maintenance task. The E940308-1 Grease Fitting is strategically placed for easy lubrication, even in tight spaces.

Applicable Working Conditions

Our accessories are engineered to perform reliably in the toughest oil and gas drilling scenarios, including high-stress shale gas environments where casing deformation is a common challenge:

• Onshore shale gas fields (such as the Changning-Weiyuan National Shale Gas Demonstration Zone) with high-pressure hydraulic fracturing operations, where components must withstand extreme pressure (up to 17 MPa pore pressure disturbance) and constant vibration.

• Offshore drilling platforms, where high humidity, salt spray, and constant vibration can corrode and damage standard components—our zinc-nickel coating and anti-corrosion treatment prevent this.

• Sour gas and high-pressure wells (up to 17,000 psi), complying with API Spec 7K:2015 and NACE MR0175/ISO 15156 standards to ensure safety and performance in hazardous environments.

• Conventional onshore oilfields (desert, grassland, and mountainous regions) with extreme temperature fluctuations (-48°C to 95°C), where components must withstand thermal expansion and contraction without failure.

We supply the following spare parts:

Field Fault Repair Cases (4 Real Scenarios)

Case 1: Changning-Weiyuan Shale Gas Field, Sichuan, China

Equipment Model: 7704-A-35 “UC-3” Casing Slips | Load: 490 tons | Fault: Casing slips worn, causing casing deformation during hydraulic fracturing (pore pressure disturbance of 17 MPa), leading to 3 hours of unplanned downtime. Repair: Replaced 7704-A-35 “UC-3” Casing Slips and 7638-116 Renewable Liner, adjusted slip alignment. Post-Repair Indicators: Casing grip force increased to 520 tons, no deformation in 40 days of continuous fracturing operations. Customer Feedback: “The new UC-3 slips solved our casing deformation issue—we’ve reduced downtime by 70% and extended well life by an estimated 5 years.”

Case 2: Eagle Ford Shale, Texas, USA

Equipment Model: SDML 15569-1 “SD” Type Rotary Slips (Less Inserts) | Load: 100 tons | Fault: Insert retainer ring (E30214) broken, causing inserts to dislodge and pipe rotation during drilling.Repair: Replaced E30214 Insert Ret. Ring and 34-209 4 1/2” X 4 1/2” Inserts (Set of 4), lubricated with E940308-1 Grease Fitting. Post-Repair Indicators: Pipe rotation reduced to zero, insert retention rate 100% in 38 days. Customer Feedback: “The retainer ring and inserts fit perfectly—we haven’t had a single dislodgment issue, and our drilling efficiency has improved by 15%.”

Case 3: North Sea Offshore Platform, UK

Equipment Model: 14-631-444 “CMS-3” Taper Casing Slips | Load: 450 tons | Fault: Hinge Pin 707-000-0100 corroded and bent, causing slip segment misalignment. Repair: Replaced Hinge Pin 707-000-0100 and E55504 Hinge Pin Retainer, coated with anti-corrosion grease. Post-Repair Indicators: Slip segment alignment error ≤0.007 inches, load-bearing capacity restored to 480 tons. Customer Feedback: “The corrosion-resistant hinge pin has held up in the salt spray for 3 months—no issues, which is a huge improvement over our previous supplier’s parts.”

Case 4: Permian Basin, New Mexico, USA

Equipment Model: 7638-5108 “C-1” Drill Collar Slips (8 1/2” – 10”) | Load: 130 tons | Fault: Latch spring (E29338) broken, causing slips to disengage during drill collar running. Repair: Replaced E29338 Latch Spring and T24526 Latch Spring Plunger, inspected E11581 Latch Cam for wear. Post-Repair Indicators: Latch engagement firm, no disengagement in 25 drill collar runs, maintenance time reduced by 22 minutes per session. Customer Feedback: “The new latch spring is much more durable—we’re replacing springs half as often, and our drill collar operations are now seamless.”

Maintenance & Engineer’s Practical Advice

Maintenance Recommendations

• Lubricate all hinge pins (707-000-0100, 707-000-3000) and grease points (E940308-1) every 5 hours of operation with NLGI Grade 2 high-temperature grease—this prevents dry friction and extends component life by 60,000 cycles, critical in high-stress fracturing environments.

• Inspect 21-109-D, 21-107-D, and 34-209 inserts daily for wear; replace when tooth height drops below 3.2mm to avoid pipe slippage and casing damage, especially in shale gas fields where casing deformation is a high risk.

• Check retainer rings (32-017, E30214) and cotter pins weekly for bending or corrosion; replace immediately if any damage is found—loose retainer rings are the #1 cause of insert dislodgment in field operations.

• Store unused components in a dry, climate-controlled area, wrapped in anti-corrosion film, to prevent rust. Components stored this way retain their performance for up to 2.8 years, compared to 1.2 years for improperly stored parts.

Engineer’s Pitfall Reminders

Based on 20+ years of field experience—including work in shale gas fields prone to casing deformation—our senior drilling engineers share key tips to avoid common, costly mistakes:

• Never mix components from different suppliers—our 7704-A-35 “UC-3” Casing Slips are precision-machined to fit only 7638-116 Renewable Liners; mixing parts can cause misalignment and casing deformation, as we’ve seen in 35% of field failure cases in shale gas fields.

• Do not overload casing slips beyond their rated capacity—7704-A-35 slips are rated for 520 tons; exceeding this can bend slip segments and damage casing, costing up to $15,000 in repairs and 5+ hours of downtime.

• Avoid using low-quality grease in sour gas or shale gas wells—only use NACE MR0175/ISO 15156-approved grease to prevent corrosion and component seizure, especially in environments with high H₂S content or pore pressure disturbance.

• Always inspect components before installation—even new parts can have minor burrs or dimensional errors (we find 1-2 faulty parts per 1000 units); a 5-minute inspection can save 10+ hours of downtime, critical in time-sensitive fracturing operations.

FAQ (Frequently Asked Questions)

Procurement Guide & Conclusion

When procuring oil drilling accessories—especially for high-stress shale gas operations where casing deformation and downtime are major risks—choosing parts that are compatible, durable, and compliant with industry standards is the key to reducing costs and ensuring operational continuity. Our product lineup, including the 7704-A-35 “UC-3” Casing Slips, SDML 15569-1 “SD” Type Rotary Slips, 14-631-444 “CMS-3” Taper Casing Slips, and other critical parts, is backed by exclusive data, rigorous testing, and industry certifications. We have supplied accessories to 42 major oilfields and shale gas projects across 14 countries, with a 99.5% customer satisfaction rate and over 1.8 million components in active use—including extensive deployment in the Changning-Weiyuan Shale Gas Field. All products come with detailed technical specifications, maintenance guides, and compliance certificates, providing you with both clear procurement reference standards and practical technical support to solve on-site problems, such as casing deformation and component failure. Whether you need a single Hinge Pin 707-000-0100, a set of 21-109-DSET Inserts, or a full range of accessories for your rig, we can meet your needs. Our components are designed to fit perfectly, last longer, and reduce maintenance time—helping you keep your drilling operations running safely and efficiently, even in the toughest shale gas and offshore environments. Contact us today to select the right components for your equipment; our team of technical experts will help you choose the best solution to meet your specific operational needs.

contact us ：

Emeil: [email protected]  

whatsapp: +86 15275658619