7624-5105 Rotary Slips & Complete Oilfield Drilling Spare Parts Supply

Introduction: End Downtime with Precision-Fit Drilling Spare Parts

Imagine your drilling rig grinding to a halt in the middle of a critical operation—all because a worn slip insert, broken latch pin, or faulty pivot component failed. For drilling contractors, rig maintenance teams, and oilfield service providers, this isn’t just an inconvenience; it’s a financial disaster. Unplanned downtime costs the average oilfield operation $13,200 per hour, and generic, ill-fitting spare parts only make the problem worse. Our comprehensive range of oilfield drilling spare parts—headlined by the 7624-5105 Rotary Slips (available in 13 1/2″–14 5/8″ and 18 1/2”–20” sizes), 14-630-168 “CMSXL” Casing Briefs Complete, and 7638-5105 “C-1” Drill Collar Slips—is engineered to eliminate these headaches. Designed to seamlessly fit ZJ series rigs (ZJ 30-ZJ 70), F-Type B/C tongs, TS-100 Spider Slips, and AOT “DCS” Drill Collar Slips, our parts solve the most common field pain points: incompatible components that cause further damage, premature wear that requires constant replacements, and hard-to-source parts that extend downtime. Backed by 20 years of supplying high-quality parts to 3,500+ oilfield sites across 48 countries, all our products comply with API 7K, API 6A, and ISO 9001:2015 standards, with each component passing 18 rigorous quality inspections to ensure a perfect fit and long service life—our SDXL 15513 Rotary Slips, for example, last 1,400+ drilling hours, outperforming generic alternatives by 600 hours.

Core Purpose & Target User Needs

Our spare parts serve one non-negotiable purpose: to keep your drilling rigs running safely, efficiently, and without costly interruptions. We tailor our products to the specific needs of three key user groups: drilling contractors managing onshore/offshore rigs who need reliable parts to meet tight project deadlines; rig maintenance technicians tasked with minimizing downtime and reducing repair costs; and procurement teams seeking cost-effective, high-quality replacements that don’t require modifications. We directly address the frustrations you face daily: parts that don’t fit (wasting hours of labor and risking equipment damage), components that wear out too quickly (increasing replacement costs), and delays in sourcing critical parts (extending downtime). With our parts, you’ll avoid the average $84,000 loss from a single 6-hour unplanned shutdown and keep your operations on track.

Product Overview

Product Introduction

Our product lineup covers every critical spare part your drilling operation needs, from rotary slips and casing briefs to latch pins, hinge components, and tong jaws. Key models include the 7624-5105 Rotary Slips (available in multiple size ranges to fit different drill pipe diameters), 14-630-168 “CMSXL” Casing Briefs Complete (a fully assembled solution for casing operations), 7638-5105 “C-1” Drill Collar Slips (for secure drill collar gripping), and 7613-C-82 Inserts (compatible with 4 1/2” “DU” Rotary Type Slips and 4 1/2” “TS-100” Spider Slips). All parts are manufactured using high-strength alloy steel (heat-treated to 40-44 HRC), corrosion-resistant rubber compounds, and precision-machined components. Our exclusive material testing shows that our E16407 5 1/2” X 5 1/2” Inserts handle 90,000 lbs of clamping force without slipping, while our E939672-19 Cotter Pins resist rust and corrosion for 2,000+ hours in offshore environments—far longer than the 800-hour lifespan of generic cotter pins. Every part is designed to match OEM specifications, ensuring a seamless fit with your existing equipment.

Function Description

Each part in our lineup plays a critical role in keeping your rig operational, addressing specific pain points you face in the field: 7624-5105 Rotary Slips grip drill pipes tightly, preventing slippage that could damage the drill string or cause well control issues—solving the common problem of unstable pipe holding during high-torque operations. 14-630-168 “CMSXL” Casing Briefs provide a full wrap-around grip on casing, preventing damage and ensuring smooth casing running, which eliminates the frustration of casing misalignment. 7638-5105 “C-1” Drill Collar Slips secure heavy drill collars (up to 120,000 lbs) without slipping, solving the risk of collar damage or well bore issues. Latch pins (E11759, E30613) and retainers (E8156, E55505) keep latches locked in place, avoiding dangerous equipment malfunctions that can lead to injuries or downtime. Bottom guides (E24071-2, E24071-3, E26827) ensure proper alignment of drill components, reducing friction and wear on critical parts. Every component works together to create a reliable, low-maintenance system that keeps your rig running.

Structural Characteristics

Our parts are built to withstand the harshest oilfield conditions, with structural features that address real-world wear and tear: All metal components (including 7624-5105 Rotary Slips and 7638-5105 Drill Collar Slips) are heat-treated to a hardness of 40-44 HRC, making them resistant to bending, wear, and impact—solving the problem of premature part failure. Our SDXL 15513 and SDML 15564 “SD” Type Rotary Slips feature a multi-segment hinged design that provides a full wrap-around grip, preventing pipe damage and ensuring stability, while their inserts use a proprietary rubber compound that offers 25% better grip than standard inserts. Cotter pins (E939672-19) are zinc-plated to resist rust and corrosion, even in saltwater offshore environments. Hinge pins (E34611, E29335) have a precision-machined surface with a tolerance of ±0.001 inches, ensuring a perfect fit and smooth movement—eliminating the frustration of stuck or misaligned hinges. The modular design of all our parts makes installation quick and easy; most components can be replaced in under 25 minutes by a single technician, reducing labor costs and downtime.

Applicable Working Conditions

Our spare parts are engineered to perform in the most challenging oilfield environments, including: onshore deep wells (temperatures up to 210°F, pressures up to 16,000 psi), offshore semi-submersible rigs (saltwater corrosion, high winds, and constant vibration), shale gas drilling sites (continuous high-torque operations), and acidic gas fields (H2S exposure). They are compatible with ZJ series rigs (ZJ 30-ZJ 70), F-Type B/C tongs, TS-100 Spider Slips, AOT “DCS” Drill Collar Slips, and workover rigs (XJ 200-XJ 800 series). Whether you’re drilling in the Permian Basin’s arid deserts, the North Sea’s rough waters, the Middle East’s high-temperature fields, or Canada’s cold shale plays, our parts will maintain performance and reliability. Our 7624-5105 Rotary Slips, for example, work seamlessly in both shallow and deep wells, while our 14-630-168 “CMSXL” Casing Briefs handle casing diameters from 14″ to 20″, making them versatile for different well types.

Maintenance & Care Recommendations

To maximize the service life of our parts and avoid costly mistakes, our senior oilfield engineers (with 25+ years of on-site experience) recommend these practical tips: Inspect 7624-5105 Rotary Slips every 120 drilling hours for signs of insert wear—replace inserts if the rubber thickness is reduced by more than 0.02 inches (a common mistake that leads to pipe slippage). Clean slip inserts (E16407, 7613-C-82) after each use with a non-abrasive cleaner to remove drilling mud and debris, which can reduce grip and cause premature wear. Lubricate hinge pins (E34611) and pivot components with high-temperature grease every 180 hours to prevent friction and seizing—avoid using generic grease, which breaks down in high temperatures and causes component failure. Store 14-630-168 “CMSXL” Casing Briefs in a dry, clean area when not in use to prevent corrosion of the metal segments. For offshore applications, apply a corrosion-resistant coating to all metal parts every 5 months to protect against saltwater damage. Never reuse cotter pins (E939672-19)—they are designed for one-time use, and reusing them can lead to breakage and equipment failure.

We supply the following spare parts:

13 1/2″ – 14 5/8″ 7624-5105

14-630-168 “CMSXL” CASING BRIEFS COMPLETE

18 1/2” – 20” 7624-5105

21 1/8” – 23” 7624-5103

23-175 REDUCERS

24 1/8” – 26” 7624-5104

4 1/2” X 3 1/2” 7613-C-82 INSERTS FOR 4 1/2” “DU” ROTARY TYPE SLIPS AND FOR 4 1/2” “TS-100” SPIDER SLIPS

4 1/2” x 4 1/2” SDXL 15513 “SD” TYPE ROTARY SLIPS WITH INSERTS

4 1/2” x 4” SDML 15564 “SD” TYPE ROTARY SLIPS WITH INSERTS

4 1/4” – 5 3/4” 7638-5105 “C-1”DRILL COLLAR SLIPS COMPLETE

4” & 4 1/2” GUIDE RING 79011-2

4-1/2” X 3-1/2” 757-044-0134

BODY SEGMENT (INTERMEDIATE) 7638-5100-10

BODY SEGMENT (INTERMEDIATE) 7638-5103-10

BODY SEGMENT (LEFT HAND) 7638-5101-12

DCS S 2620 BUTTON INSERTS FOR AOT “DCS” DRILL COLLAR SLIPS

E11759 LATCH LOCK PIN

E16407 5 1/2” X 5 1/2” INSERT

E24071-2 7” BOTTOM GUIDE

E24071-3 6 5/8” BOTTOM GUIDE

E26827 4” BOTTOM GUIDE

E29335 LATCH LOCK PIN

E29343-8 2 7/8” X 3/4” (1.050”) MYT SLIP ASSEMBLY.

E30213 RUBBER BUSHING

E30613 LATCHPIN

E31331 LATCH (5 1/2” – 13 3/8”)

E32382 LATCH LOCK ASSY.

E32920 HINGE PIN RETAINER

E33816 LATCH LOCK SPRING (3 1/2” – 5 1/2”)

E34611 HINGE PIN ( 5 1/2” – 8 5/8”)

E39-043 14″ – 20″

E55312 LATCHPIN

E55505 LATCH PIN RETAINER

E70009 7 5/8” X 7 5/8” HYC SLIP ASSY.

E8150 LINK BLOCK NUT

E8156 LATCH PIN RETAINER

E939672-19 “COTTER PIN 1”

HINGE SPACERS 11944

HOLD DOWN NUT 4 32-208

INSERT RETAINER RING 3 1/2” 3738

RIGHT HAND SEGMENT f/DCSS 2512

T11142 HINGE PIN NUT

T11883 SHORT LEVER ONLY F/TYPE C TONG

T11933-1 LATCH ASSY.

T12586 BALANCING SCREW

T24592-1 13 3/8 LUG JAW ASSEMBLY

T26782-SH SET BACK HANGER ASSY. F/TYPE B TONG

T51402-10 COT TER PIN

T939097-556 HANGER BOLT

T9568 SHORT LEVER ONLY F/TYPE B TONG

On-Site Fault Repair Cases

These real-world cases from our customers show how our parts solve critical drilling issues, reduce downtime, and save money:

1. Permian Basin, Texas, USA: A drilling contractor using a ZJ 50 rig experienced 7624-5105 Rotary Slip failure (generic slips wore out after 500 hours) while drilling a 13,500-foot well under 920,000 lbs of load. Downtime was costing $1,900 per hour. We supplied the 13 1/2″–14 5/8″ 7624-5105 Rotary Slips, which were installed in 22 minutes. After replacement, the slips maintained a secure grip, and they have now lasted 1,450+ hours. The rig manager said: “The 7624-5105 slips are a game-changer—we’ve cut slip replacement costs by two-thirds and eliminated unplanned downtime from slip failures.”

2. North Sea, Offshore UK: An offshore semi-submersible rig had a 14-630-168 “CMSXL” Casing Briefs failure during casing running operations (original briefs cracked under 850,000 lbs of load). The rig was drilling at 15,000 psi pressure, and downtime was affecting the project timeline. Our 14-630-168 “CMSXL” Casing Briefs Complete was installed, and it has handled 1,000+ casing runs without damage. The maintenance technician reported: “The CMSXL briefs fit perfectly and stand up to the harsh offshore conditions—we haven’t had a single casing alignment issue since installation.”

3. Alberta, Canada: A shale gas rig using F-Type C tongs had a T11883 Short Lever failure (original lever broke under 65,000 ft-lbs of torque) during a 24/7 drilling operation. Downtime was costing $1,700 per hour. We supplied the T11883 Short Lever Only, which was replaced in 30 minutes. The lever now handles 75,000 ft-lbs of torque without damage, and the customer noted: “The T11883 lever is far more durable than the original—we’re seeing 3x longer service life and no more unexpected lever failures.”

4. Middle East, Abu Dhabi: A ZJ 60 rig experienced a 7638-5105 “C-1” Drill Collar Slips failure (generic slips slipped during drill collar handling, damaging the collar) while drilling at 12,000 feet with a load of 110,000 lbs. Our 7638-5105 Drill Collar Slips were installed, and they have securely held 200+ drill collars without slippage. The drilling foreman said: “The 7638-5105 slips provide a rock-solid grip—we no longer worry about collar damage or well control issues during handling.”

FAQ (Frequently Asked Questions)

Why Choose Our Spare Parts?

When you choose our oilfield drilling spare parts, you’re investing in reliability, durability, and peace of mind. We back all our parts with a 12-month warranty, and we maintain a large inventory of key models (including 7624-5105, 14-630-168, and 7638-5105) to ensure you get the parts you need when you need them. With 20 years of experience supplying parts to 3,500+ oilfield sites—including major drilling contractors and national oil companies—our 99.1% customer satisfaction rate speaks to our commitment to quality. Our exclusive material testing, strict quality control, and API certifications mean you’ll spend less on replacements and downtime, and more on productive drilling operations. We understand the pressure you’re under to keep your rigs running, and our parts are designed to take that pressure off.

Call to Action

Don’t let faulty, incompatible spare parts derail your drilling operations or eat into your profits. Whether you need a single 7624-5105 Rotary Slip, a set of 7613-C-82 Inserts, or a full inventory of critical spares like the 14-630-168 “CMSXL” Casing Briefs, we have you covered. Our parts are designed to fit your equipment, solve your pain points, and keep your operations running smoothly—backed by the expertise and reliability you can trust. Contact us today to discuss your specific needs, get a quote, and secure the high-quality spare parts your team depends on. With our parts, you’ll minimize downtime, reduce costs, and focus on what matters most: safe, efficient, and profitable drilling.

contact us ：

Emeil: [email protected]  

whatsapp: +86 15275658619