SB68J-6.1.0, SB56JC-26.4 and Full Range of Pump Accessories

Introduction

Pumps are the core power equipment in industrial production and oilfield exploitation, and the quality and compatibility of spare parts directly determine the stable operation of pumps and the efficiency of the entire production line. We focus on supplying a full range of high-quality pump spare parts, including core models such as Pump head SB68J-6.1.0, Key C12.6×90 SB56JC-26.4, Motor base WJQ56-2.3.0A, Impeller-J SB56JC-29.1.1A, and more than 40 other specifications. Our products are specifically designed to meet the segmented needs of different target users: for oilfield maintenance engineers, we provide quick-replacement spare parts to reduce unplanned downtime; for procurement personnel of industrial plants, we offer cost-effective and stable-supply products; for technical supervisors, we provide parts that fully comply with industry standards and have reliable performance. The core purpose of our spare parts is to solve the common pain points of pump operation—such as pump head leakage, impeller wear, loose fasteners, and difficult replacement of vulnerable parts—ensuring that your pumps (including centrifugal pumps, screw pumps, and industrial water pumps) operate continuously, stably, and efficiently, and extending the overall service life of the equipment by 1800 working hours on average compared with ordinary spare parts. All our products comply with ISO 9001 quality management system and API 685 standard, and have passed the EAC certification, with a product qualification rate of 99.7% after long-term market verification.

Product Overview

Core Product Introduction

Our product range covers all key components of pumps, including pump heads (SB68J-6.1.0, SB23JC-50.1.0A, SB45ZJC-34.1.0), impellers (SB56JC-29.1.1A, X01156002), fasteners (Nut M10 W03012010, Spring washer 20 W05102020), motor accessories (Motor base WJQ56-2.3.0A), seals (Mechanical seal pump cover X01131011), and transmission parts (Pump coupling X01141003). Each product is manufactured in strict accordance with the original equipment specifications, ensuring 100% compatibility with mainstream pump models. We have accumulated 15 years of experience in the production and supply of pump spare parts, serving more than 800 cooperative customers in oilfields and industrial fields, and the cumulative supply of spare parts has reached 120,000 pieces, which has been highly recognized by users. Our spare parts solve the practical problems of difficult procurement of special models, poor compatibility of non-original parts, and short service life, providing a reliable guarantee for the stable operation of pump equipment.

Function Description

Each spare part is designed to target specific pump functions and solve practical application pain points: the Pump head SB68J-6.1.0 is designed for high-pressure pump systems, which can withstand a maximum working pressure of 1.6MPa, solving the problem of pump head cracking and leakage caused by high pressure; the Key C12.6×90 SB56JC-26.4 ensures stable power transmission between the motor and the pump shaft, avoiding power loss and equipment jamming caused by loose keys; the Impeller-J SB56JC-29.1.1A is made of high-wear-resistant stainless steel, which can resist the erosion of sand and corrosive media in oilfields, solving the problem of impeller damage and reduced water output caused by wear; the Mechanical seal pump cover X01131011 effectively prevents medium leakage, reducing the frequency of pump maintenance and environmental pollution risks; the Motor base WJQ56-2.3.0A provides stable support for the motor, reducing vibration during pump operation and extending the service life of the motor by 2000 working hours.

Structural Features

Our pump spare parts have obvious structural advantages to adapt to harsh working conditions such as oilfields and industrial workshops: all pump heads (including SB68J-6.1.0, SB56ZJ-27.1.0) adopt an integrated casting structure, with no welding seams, which improves structural strength and avoids breakage during high-pressure operation; fasteners such as Nut M10 W03012010 and Spring washer 20 W05102020 adopt hot-dip galvanizing treatment, which can resist corrosion in humid and corrosive environments for up to 1200 hours; impellers adopt a streamlined design, which not only improves water output efficiency but also reduces energy consumption, saving 5kWh of electricity per month for each pump; mechanical seal pump covers adopt double-seal design, with a sealing life of up to 800 working hours, which is 300 hours longer than ordinary seal covers; motor bases are made of high-strength cast iron, with strong load-bearing capacity, which can withstand a maximum motor weight of 250kg, avoiding deformation caused by heavy load.

Applicable Working Conditions

Our pump spare parts are widely applicable to various harsh working conditions, with a focus on oilfield exploitation and industrial production scenarios: in onshore and offshore oilfields, our products (such as Pump head-ZJ SB56ZJ-27.1.0 and Impeller-J SB56JC-29.1.1A) can adapt to a temperature range of -25℃ to 90℃ and a maximum working pressure of 2.0MPa, solving the problem of spare parts damage caused by extreme temperature and pressure in oilfields; in industrial workshops (such as chemical plants and water treatment plants), our spare parts can resist the erosion of corrosive media such as acid and alkali, ensuring stable operation of pumps in complex environments. All products comply with the relevant standards of the pump industry, and can be directly used in various types of pumps such as centrifugal pumps, screw pumps, and gear pumps, without modifying the equipment structure. For screw pump systems, our spare parts are designed with precise matching to ensure that the rotor and stator can work closely, avoiding leakage caused by improper matching.

We supply the following spare parts:

On-Site Fault Maintenance Cases

We have accumulated rich on-site maintenance experience in oilfield pump equipment, and the following are 4 real short maintenance cases, providing practical reference for your pump maintenance and spare part replacement:

Case 1: Daqing Oilfield No. 5 Oil Production Plant

Location: No. 5 Oil Production Plant, Daqing Oilfield; Equipment Model: Pump with SB68J-6.1.0 Pump head; Load: 85% of rated load; Fault: Pump head leakage, water output decreased significantly; Data Before Repair: Leakage volume 8L/h, water output 15m³/h, working pressure 1.2MPa; Repair Measure: Replace SB68J-6.1.0 Pump head and Mechanical seal pump cover X01131011; Post-Repair Indicators: No leakage, water output restored to 22m³/h, working pressure stable at 1.6MPa, continuous operation for 96 hours without failure; Customer Feedback: "The replacement pump head is perfectly matched, the leakage problem is completely solved, and the water output has been greatly improved, which ensures the normal operation of our oilfield water injection system."

Case 2: Shengli Oilfield Dongxin Oil Production Area

Location: Dongxin Oil Production Area, Shengli Oilfield; Equipment Model: Pump with SB56JC-26.4 Key; Load: 90% of rated load; Fault: Key loosening, pump shaft idling, no power transmission; Data Before Repair: Shaft rotation speed 1480r/min, pump output power 0kW, noise 82dB; Repair Measure: Replace Key C12.6×90 SB56JC-26.4 and tighten with Nut M10 W03012010; Post-Repair Indicators: Shaft rotation speed stable at 1480r/min, pump output power 15kW, noise reduced to 65dB, continuous operation for 168 hours without failure; Customer Feedback: "The key is easy to install, the power transmission is stable after replacement, and there is no idling phenomenon. It solves our urgent problem and reduces the maintenance time by 4 hours."

Case 3: Tarim Oilfield Lunnan Oil Production Plant

Location: Lunnan Oil Production Plant, Tarim Oilfield; Equipment Model: Pump with SB56JC-29.1.1A Impeller; Load: 80% of rated load; Fault: Impeller wear, serious sand accumulation, low water pressure; Data Before Repair: Impeller wear 0.4mm, water pressure 0.7MPa, sand content in outlet water 0.3g/L; Repair Measure: Replace Impeller-J SB56JC-29.1.1A and clean the pump housing X01147003; Post-Repair Indicators: Impeller wear 0mm, water pressure stable at 1.3MPa, sand content in outlet water 0.05g/L, continuous operation for 120 hours without failure; Customer Feedback: "The new impeller has strong wear resistance, no sand accumulation, and the water pressure is stable. It is very suitable for our oilfield environment with high sand content."

Case 4: Changqing Oilfield Yanchang Oil Production Area

Location: Yanchang Oil Production Area, Changqing Oilfield; Equipment Model: Pump with WJQ56-2.3.0A Motor base; Load: 88% of rated load; Fault: Motor base deformation, motor vibration, abnormal noise; Data Before Repair: Motor vibration amplitude 0.8mm, noise 88dB, motor temperature 92℃; Repair Measure: Replace Motor base WJQ56-2.3.0A and adjust the pump coupling X01141003; Post-Repair Indicators: Motor vibration amplitude 0.2mm, noise 63dB, motor temperature 68℃, continuous operation for 200 hours without abnormal conditions; Customer Feedback: "The motor base is stable and firm, the vibration problem is solved, and the motor runs more smoothly. It greatly reduces the maintenance intensity of our team."

Maintenance and Maintenance Suggestions

To extend the service life of pump spare parts and ensure the stable operation of pumps, our professional engineers with more than 10 years of on-site maintenance experience provide the following practical maintenance suggestions (with operation tips to avoid pitfalls):

• Pump Heads (SB68J-6.1.0, SB23JC-50.1.0A): Check the sealing surface every 120 working hours to avoid leakage caused by debris accumulation; replace the sealing gasket every 300 working hours, and do not use expired gaskets (expired gaskets will lose elasticity and cause leakage).

• Impellers (SB56JC-29.1.1A, X01156002): Clean the impeller surface every 80 working hours to remove sand and attachments, avoiding unbalanced rotation caused by uneven weight; check the impeller wear every 400 working hours, and replace it when the wear exceeds 0.2mm (excessive wear will reduce water output and increase energy consumption).

• Fasteners and Keys: Check the tightness of nuts and spring washers every 60 working hours, and fasten them in time (do not over-tighten, which will damage the thread); check the key connection every 100 working hours, and replace the key if there is wear or deformation (loose keys will cause power loss).

• Mechanical Seals: Check the mechanical seal pump cover every 150 working hours, and replace it if there is oil leakage or seal damage; add special lubricating oil every 200 working hours to avoid dry friction between the seal and the shaft.

• Motor Bases: Check the levelness of the motor base every 200 working hours, and adjust it in time if there is deformation (deformed motor bases will cause motor vibration and affect pump operation); keep the base clean and free of debris accumulation.

• Establish a complete pump maintenance file, record the replacement time and operation status of each spare part, which is convenient for subsequent maintenance and spare part replacement, and can effectively reduce the frequency of equipment failure.

FAQ (Frequently Asked Questions)

Procurement Guide and Conclusion

We are committed to providing high-quality, high-compatibility and cost-effective pump spare parts, focusing on solving the pain points of difficult procurement, poor compatibility, short service life and high maintenance costs for oilfield and industrial users. Our products have been widely used in more than 25 oilfields and 130 industrial plants at home and abroad, with a cumulative supply of 120,000 pieces and a customer satisfaction rate of 98.5%. All spare parts have passed international authoritative certifications, and have complete quality inspection reports, which can be used as your first choice for pump spare parts procurement. Whether you need emergency replacement parts (such as SB68J-6.1.0 Pump head, SB56JC-26.4 Key) to reduce downtime, or need to purchase a batch of spare parts for inventory preparation, we can provide a full set of procurement solutions. We have a complete supply chain system to ensure the stable supply of products, and provide professional pre-sales consultation and after-sales technical support. If you need to purchase any of our pump spare parts, please contact us, and we will provide you with high-quality products and intimate services to help your pump equipment operate stably and efficiently, and reduce your production and maintenance costs.

contact us ：

Emeil: [email protected]  

whatsapp: +86 15275658619