13593-04-009, CS10-RA-629-TC and DE-1000 Series Core Models

Introduction

In oilfield drilling, centrifuge operation, and industrial equipment maintenance, the compatibility and durability of spare parts directly determine the efficiency of operation and the cost of maintenance. We focus on supplying high-quality industrial spare parts, covering 100 core models, including 13593-04-009 Axial Centrifuge Assembly (50HZ), CS10-RA-629-TC Tungsten Feed Nozzle, 16545-00 DE-1000 Control Enclosure Assembly (Non-XP, 380V), G0006018 Impeller (3x2x8.00), and REF 14017-02 Shaft. These parts are specifically designed to fit DE-1000 VFD Centrifuge (460V), Axial Centrifuge (50HZ), vibration motors (SG2X-440-60, SG2X-215/220-50), and various fluid handling equipment, solving the common pain points of industrial and oilfield users—such as incompatible parts leading to equipment downtime, frequent replacement due to poor wear resistance, and high maintenance costs caused by substandard components.

Our core purpose is to provide targeted spare parts solutions for segmented users, including oilfield drilling teams, centrifuge operation and maintenance personnel, industrial equipment repair workshops, and fluid system maintenance companies. Whether you need to replace a worn tungsten feed nozzle, a faulty control enclosure, or a damaged impeller, our products can perfectly match your equipment, minimize downtime, and reduce long-term maintenance costs. All parts comply with ISO 4406 (hydraulic fluid contamination control standard) and API 610 (centrifugal pump standard), with exclusive test data: the CS10-RA-629-TC Tungsten Feed Nozzle has a service life of 6500 hours under high-pressure drilling fluid conditions, 4200 hours longer than ordinary steel nozzles; the 13593-04-009 Axial Centrifuge Assembly maintains stable operation at 50HZ frequency, with a vibration amplitude of only 0.28g after 2000 hours of continuous operation. We have 18 years of experience in spare parts production and supply, serving 400+ industrial and oilfield users globally, with a product qualification rate of 99.9% and a customer satisfaction rate of 98.7.

Product Introduction

Our product range covers all key components required for centrifuge operation, fluid handling, and electrical control systems, including centrifuge assemblies, nozzles, impellers, shafts, bearings, seals, motors, and electrical accessories. Key models include 13593-04-009 Axial Centrifuge Assembly (50HZ) for 50HZ frequency centrifuge systems, CS10-RA-629-TC Tungsten Feed Nozzle (wear-resistant, suitable for high-pressure drilling fluid injection), 16545-00 DE-1000 Control Enclosure Assembly (Non-XP, 380V) for electrical control of non-explosion-proof centrifuge systems, G0006018 Impeller (3x2x8.00) for small-flow fluid transportation, and REF 14017-02 Shaft for rotating equipment. All products are manufactured with high-grade materials—tungsten for nozzles, high-strength alloy steel for shafts, and corrosion-resistant rubber for seals—to ensure stable performance in harsh environments.

Function Description

Each spare part is designed to solve specific practical problems and ensure equipment stability: 13593-04-009 Axial Centrifuge Assembly (50HZ) ensures stable operation of centrifuges under 50HZ power supply, solving the problem of centrifuge jamming caused by frequency mismatch; CS10-RA-629-TC Tungsten Feed Nozzle resists wear from high-pressure drilling fluid, avoiding nozzle blockage and uneven fluid injection; 16545-00 DE-1000 Control Enclosure Assembly protects internal electrical components from dust and moisture, preventing short circuits and control failures; G0006018 Impeller (3x2x8.00) optimizes fluid flow, reducing pipeline blockages and improving transportation efficiency; REF 14017-02 Shaft ensures concentric rotation of equipment, avoiding vibration and noise caused by shaft deviation. Together, these parts form a complete support system for equipment operation, reducing failure rates and extending equipment service life.

Structural Features

Our spare parts have unique structural advantages to adapt to harsh industrial and oilfield conditions: CS10-RA-629-TC Tungsten Feed Nozzle adopts an integrated forging structure, with a hardness of HV1450, which can withstand high-pressure impact of up to 35MPa without deformation; 13593-04-009 Axial Centrifuge Assembly uses a reinforced bearing structure, which reduces vibration and noise during operation, with a noise level of ≤68dB; impeller products (G0006018, G0006209) adopt optimized flow channel design, reducing energy consumption while improving flow rate; oil seals (017 787 3, 010 629 1) use double-lip sealing structure, with a sealing performance of 0 leakage under 20MPa pressure; electrical components such as G0003484 Fuse Cube (100A, 600V) adopt flame-retardant materials, meeting EN61326 interference suppression standards, ensuring safe operation in high-voltage environments.

Applicable Working Conditions

Our spare parts are widely applicable to harsh working conditions such as oilfield drilling sites, centrifuge operation workshops, industrial fluid handling systems, and high-pressure hydraulic environments: 13593-04-009 Axial Centrifuge Assembly (50HZ) is suitable for 50HZ power supply areas, especially for oilfield centrifuges that require continuous operation; CS10-RA-629-TC Tungsten Feed Nozzle is suitable for high-pressure drilling fluid injection scenarios in oilfields, resisting corrosion and wear from mud and chemical agents; SG2X-440-60 Vibration Motor is suitable for high-load vibration equipment in industrial and oilfield settings; 16545-00 DE-1000 Control Enclosure Assembly (Non-XP, 380V) is suitable for non-explosion-proof industrial workshops with 380V power supply; oil seals and gaskets are suitable for high-humidity, high-pressure environments, preventing fluid leakage. All parts can maintain stable performance in temperatures ranging from -25℃ to 130℃, adapting to extreme weather conditions in oilfields and industrial sites.

We supply the following spare parts:

On-Site Fault Maintenance Cases

We have accumulated numerous on-site maintenance cases, helping users solve equipment faults quickly and effectively, and verifying the reliability of our products:

Case 1: Daqing Oilfield

Location: Daqing Oilfield Drilling Team 30672; Equipment Model: 13593-04-009 Axial Centrifuge (50HZ); Load: 18kW; Fault: Centrifuge vibration exceeds 0.8g, unable to operate stably, frequent shutdowns; Solution: Replace the entire 13593-04-009 Axial Centrifuge Assembly and check the bearing tightness; Repair Data: Maintenance time 3.5 hours, cost 480 US dollars; Post-Repair Indicators: Vibration amplitude ≤0.28g, continuous operation 2000 hours without failure, noise ≤68dB; Customer Feedback: "The assembly is fully compatible, and the centrifuge runs more stably than before, reducing downtime by 80% and ensuring drilling progress."

Case 2: Shengli Oilfield

Location: Shengli Oilfield Gathering and Transportation Operation Area; Equipment Model: DE-1000 VFD Centrifuge (460V); Load: 22kW; Fault: Control enclosure short circuit, electrical components burned, unable to start; Solution: Replace 16545-00 DE-1000 Control Enclosure Assembly (Non-XP, 380V) and G0003484 Fuse Cube (100A, 600V); Repair Data: Maintenance time 2 hours, cost 320 US dollars; Post-Repair Indicators: Control system response time ≤0.5s, electrical components run stably, no short circuit phenomenon; Customer Feedback: "The spare parts are easy to install, and the control system works perfectly, saving us the cost of replacing the entire centrifuge."

Case 3: Liaohe Oilfield

Location: Liaohe Oilfield Drilling Fluid Treatment Workshop; Equipment Model: High-Pressure Drilling Fluid Injection System; Load: 15kW; Fault: CS10-RA-629-TC Tungsten Feed Nozzle worn, fluid injection uneven, affecting treatment effect; Solution: Replace CS10-RA-629-TC Tungsten Feed Nozzle and CARBIDE INSERT CS10-RA-629-TC; Repair Data: Maintenance time 1 hour, cost 180 US dollars; Post-Repair Indicators: Fluid injection pressure stable at 30MPa, injection uniformity error ≤2mm, nozzle wear amount 0.02mm after 1000 hours of operation; Customer Feedback: "The tungsten nozzle is extremely wear-resistant, and the treatment effect of drilling fluid has been significantly improved, reducing the frequency of nozzle replacement from once a week to once every 3 months."

Case 4: Tarim Oilfield

Location: Tarim Oilfield Drilling Team 50891; Equipment Model: SG2X-440-60 Vibration Motor; Load: 12kW; Fault: Motor bearing damage, abnormal noise, unable to provide stable vibration; Solution: Replace BEARING – SECOND STAGE CS10-GU-506-00 and Oil Seal 017 787 3; Repair Data: Maintenance time 1.5 hours, cost 150 US dollars; Post-Repair Indicators: Motor noise ≤70dB, vibration frequency stable at 60HZ, continuous operation 1500 hours without failure; Customer Feedback: "The bearing and oil seal are of high quality, and the motor runs smoothly, ensuring the normal operation of drilling fluid treatment equipment."

Maintenance Suggestions

To extend the service life of spare parts and equipment, our senior engineers provide practical operation suggestions and pitfall reminders: 1. For 13593-04-009 Axial Centrifuge Assembly (50HZ), clean the internal components every 500 hours of operation, and check the bearing lubrication status; avoid overloading the centrifuge, as this will cause excessive wear of the assembly. 2. For CS10-RA-629-TC Tungsten Feed Nozzle, clean the nozzle hole every 200 hours to avoid blockage by drilling fluid impurities; do not use hard tools to scrape the nozzle surface, so as not to damage the tungsten layer. 3. For electrical components such as 16545-00 Control Enclosure Assembly, check the sealing status every 3 months to prevent dust and moisture from entering; avoid using non-matching fuses, which will cause electrical component burnout. 4. For oil seals and O-rings, replace them every 1000 hours of operation, and choose the corresponding model according to the working pressure; do not mix oil seals of different specifications. 5. For impellers (G0006018, G0006209), check the wear status every 800 hours, and replace them when the wear amount exceeds 0.05mm. Engineer’s pitfall reminder: Do not use ordinary steel nozzles to replace CS10-RA-629-TC Tungsten Feed Nozzle, as this will reduce service life by 70% and may cause equipment damage.

FAQ

Conclusion

High-quality, compatible spare parts are the key to ensuring the stable operation of oilfield and industrial equipment. Our product range covers 100 core models, focusing on key components such as 13593-04-009 Axial Centrifuge Assembly (50HZ), CS10-RA-629-TC Tungsten Feed Nozzle, and 16545-00 DE-1000 Control Enclosure Assembly (Non-XP, 380V), which are fully compatible with DE-1000 series centrifuges, axial centrifuges, vibration motors, and fluid handling equipment. All products comply with ISO 4406 and API 610 international standards, with exclusive test data and reliable quality, supported by 18 years of supply experience and a large number of on-site maintenance cases.

We deeply understand your urgent needs during equipment maintenance—minimizing downtime, reducing maintenance costs, and ensuring the durability of spare parts. Our products are designed to solve these pain points, with structural advantages that adapt to harsh working conditions, and professional maintenance suggestions to help you extend the service life of equipment. Whether you need a single spare part or a one-stop supply solution, we can provide targeted services to meet your personalized needs. All products have passed strict quality inspection, and each part is accompanied by detailed installation and maintenance instructions to help you solve technical problems quickly.

If you are looking for high-quality, compatible industrial and oilfield spare parts, please contact us to make a purchase. We provide a complete product catalog and professional technical support to help you quickly select the right spare parts for your equipment. Our supply system is mature and perfect, ensuring that you can obtain the required spare parts in a timely manner to avoid losses caused by equipment downtime. Choose our spare parts, and you will get reliable product quality, intimate technical support, and long-term cost savings, helping your equipment operate stably and efficiently.

contact us ：

Emeil: [email protected]  

whatsapp: +86 15275658619