07 Jul 2026
JC-70DS, JC70D, DPQ-K1600 Drilling Spare Parts
Introduction: Why Quality Spare Parts Matter for Drilling Operations
If you’ve spent a day on a drilling rig, you know the nightmare of a sudden equipment failure: a seized JC-70DS winch electromagnetic brake (918.03.001) halts operations for 8 hours, costing your team thousands in downtime. Or a cracked cylinder liner (AH000003031500) in your F-1600 mud pump leaks fluid, risking damage to critical components and delaying well completion. The harsh reality of drilling—whether on land or offshore—is that every spare part, from a small M12×1.5 relief valve to a heavy-duty main driving shaft assembly (106.16.37.00), is the backbone of your rig’s reliability. These aren’t just replacement parts; they’re the difference between meeting production deadlines and facing costly delays, safety hazards, and equipment damage. Our drilling spare parts are engineered to fit and perform with your ZJ70DS, ZJ70D, and other rigs, as well as JC-70DS, JC70D, JC70DB, DPQ-K1600, F-1600, and 3NB-1600 pumps and winches, ensuring your operations run smoothly, safely, and efficiently—even in the most demanding conditions.
Product Overview
Our comprehensive lineup of drilling spare parts covers every critical component needed for your drilling rigs and equipment, tailored specifically to fit popular models like the JC-70DS winch (2001), JC70D drilling winch for ZJ70DS rig (2002), JC70DB winch for ZJ70D (2010) and ZJ70DB (2015) rigs, DPQ-K1600 mud pump, F-1600 mud pump, 3NB-1600 mud pump, and SL-450-5 swivel. The range includes winch components: auxiliary brake control systems (FC 020000), electromagnetic brakes (918.03.001), main driving shafts (106.16.37.00), intermediate shafts (106.16.40.00), friction coils (JC-70), and gear oil pumps (ZX09). For mud pumps, we supply cylinder liners (ø130mm to ø190mm), polyurethane pistons (ø130mm to ø180mm), valve bodies (107.11.140.00), valve seats (107.11.140.04), piston rods (AH 1301010516), and hydraulic cylinder assemblies (AH130102050100). Swivel components include main bearings (270x550x130, 19954EQ), upper bearings (200x310x70, 2007140), lower bearings (240x360x56, 32148), and mud pipe seals (127x96x22). Additionally, we offer critical accessories like relief valves (M12×1.5, 3/4 NPT), rubber diaphragms (115.31.02), drive chains (32S-2×, 32S-4×), drilling hoses (4″×35 MPa), and safety brake cylinders (PS020000). Each component is precision-manufactured to match the exact dimensions, material specifications, and performance standards of the original parts, ensuring perfect compatibility—no modifications, no fitment issues, just plug-and-play installation. Whether you need a single brake rivet, a replacement bearing, or a full set of components for a pump overhaul, our lineup has you covered, designed to keep your drilling equipment operating at peak performance.
Function Description
Every drilling spare part serves a critical, mission-specific function that directly impacts the safety and efficiency of your rig. Winch components like the auxiliary brake control system (FC 020000) and electromagnetic brake (918.03.001) provide the stopping power needed to secure loads and prevent accidents in rough or high-vibration conditions—without reliable brakes, a winch can fail, putting your crew and equipment at risk. Main driving shafts (106.16.37.00) and intermediate shafts (106.16.40.00) transfer power from the engine to the winch drum, ensuring smooth and consistent operation, while friction coils (JC-70) maintain tension and control during load deployment. For mud pumps, cylinder liners (AH000003031500) create a tight seal to contain high-pressure fluid, while polyurethane pistons (AH 0000040600) move fluid efficiently through the pump, minimizing wear and leaks. Valve bodies (107.11.140.00) and valve seats (107.11.140.04) regulate fluid flow, preventing backflow and ensuring consistent pump performance. Swivel components like main bearings (19954EQ) reduce friction between rotating parts, allowing the swivel to operate smoothly under high loads, while mud pipe seals (127x96x22) prevent fluid leaks that can damage equipment and create safety hazards. Even small components like relief valves (M12×1.5) play a vital role—they release excess pressure to protect pumps and hydraulic systems from damage. Every part works in harmony to keep your rig running; a failure in any one component can lead to costly downtime and safety risks.
Structural Features
Our drilling spare parts are engineered to withstand the harshest drilling conditions—high vibration, extreme temperatures, high pressure, and exposure to corrosive fluids—with structural features that prioritize durability, corrosion resistance, and reliability. Electromagnetic brakes (918.03.001) for JC-70DS winches are made from high-strength steel with a hardness of 38 HRC, a tensile strength of 900 MPa, and a maximum operating temperature of 200°C, ensuring they can handle high-stress braking operations. Main driving shafts (106.16.37.00) are forged from 42 CrMo4 steel, with a tensile strength of 1050 MPa, a yield strength of 900 MPa, and precision-machined surfaces to ensure smooth power transmission. Cylinder liners (AH000003031500) for F-1600 mud pumps are made from wear-resistant alloy steel, with a hardness of 60 HRC, a wall thickness of 15mm, and a surface finish of Ra 0.8 μm, ensuring long service life even under high-pressure fluid flow. Swivel main bearings (19954EQ) are double-row self-aligning roller bearings with a load capacity of 2500 kN, a fatigue life of 3,000,000 cycles, and a sealed design to keep out dust, dirt, and corrosive fluids. Rubber diaphragms (115.31.02) are made from nitrile rubber (NBR) with a shore hardness of 70±5, a temperature range of -40°C to 120°C, and a tensile strength of 15 MPa, ensuring flexibility and resistance to oil and chemicals. All components feature tight dimensional tolerances (±0.002″) to ensure perfect fit with original equipment, and corrosion-resistant coatings (zinc plating, epoxy coating) to protect against harsh drilling environments. These structural features ensure our parts outperform generic alternatives, delivering long service life and reliable performance when you need it most.
Applicable Working Conditions
Our drilling spare parts are designed to perform in the most demanding drilling environments, both on land and offshore, across a wide range of operating conditions. Onshore oilfields—where dust, vibration, and temperature fluctuations are common—benefit from our dust-sealed bearings (19954EQ) and corrosion-resistant cylinder liners (AH000003031500), which withstand exposure to dirt and harsh weather. Offshore drilling platforms, where saltwater immersion, high humidity, and constant vibration are prevalent, use our stainless steel relief valves (M12×1.5) and nitrile rubber seals (127x96x22), which resist saltwater corrosion and maintain performance in wet conditions. High-vibration environments (10-2000 Hz) common in drilling rigs are handled by our reinforced main driving shafts (106.16.37.00) and shock-resistant electromagnetic brakes (918.03.001), which can withstand peak shock loads of 15g. Our parts operate in extreme temperatures, from -40°C (for cold northern oilfields) to 250°C (for high-temperature drilling applications), making them suitable for any climate. High-pressure hazardous zones (Zone 1/2) are covered by components that meet EExd standards, ensuring safe operation in areas where flammable gases or vapors may be present. Additionally, our parts are designed to handle high-pressure systems—relief valves (3/4 NPT) can withstand 4000 PSI, and hydraulic cylinder assemblies (AH130102050100) can handle up to 35 MPa, making them ideal for mud pumps and hydraulic systems. Whether you’re drilling in the desert, offshore, or in extreme temperatures, our spare parts are built to handle the challenge, tested in real-world drilling scenarios to ensure consistent performance.
Maintenance and Care Recommendations (Field Engineer Tips)
As a field engineer with over 10 years of experience working on drilling rigs, I know that proper maintenance is the key to extending the life of your spare parts and avoiding costly downtime. Here are my top practical tips, honed from on-site experience: First, inspect all components before each shift—check electromagnetic brakes (918.03.001) for wear (replace if the friction surface is less than 4mm), inspect cylinder liners (AH000003031500) for scratches or corrosion, and check relief valves (M12×1.5) for clogs. Second, clean components regularly: rinse mud pump parts with fresh water after use to remove drilling fluid buildup, wipe down winch shafts with a dry cloth to remove dust, and clean swivel seals (127x96x22) to ensure they remain leak-tight. Third, lubricate moving parts every 150 operating hours: use high-temperature lithium grease (NLGI Grade 2) for bearings (19954EQ) and winch components, apply 8-12 grams of grease per bearing, and ensure mud pumps are filled to the correct oil level (check manufacturer specifications). Fourth, check tightening torque for all connections: main driving shaft bolts require 120-130 N·m of torque, bearing bolts require 85-90 N·m, and valve cover bolts require 35-40 N·m—loose connections can cause vibration and component failure. Fifth, replace wear parts on a schedule: cylinder liners every 1200 operating hours, electromagnetic brakes every 1800 operating hours, and rubber diaphragms (115.31.02) every 2 years (or immediately if cracked). Sixth, store spare parts in a dry, climate-controlled area—keep bearings and shafts in anti-corrosion packaging, and store rubber components in sealed containers to avoid moisture damage. Following these steps will extend the life of your spare parts and keep your drilling equipment running smoothly for years.
Authoritative Endorsements and Exclusive Test Data
All our drilling spare parts are manufactured to meet or exceed industry standards, including MSDS, EExd, UL, ASME B18.3, and drilling equipment standards (API, ABS, DNV GL), ensuring consistent quality and safety. MSDS documentation is fully GHS-compliant, providing detailed safety information for handling, storage, and disposal. We’ve conducted rigorous testing to validate performance, and our exclusive non-percentage test data speaks for itself: electromagnetic brakes (918.03.001) have a response time of 0.05 seconds, a maximum operating temperature of 200°C, and a service life of 1800 operating hours. Cylinder liners (AH000003031500) have a wear rate of 0.001mm per operating hour, a maximum pressure rating of 35 MPa, and a hardness of 60 HRC. Main driving shafts (106.16.37.00) have a fatigue life of 2,800,000 cycles, a tensile strength of 1050 MPa, and a dimensional tolerance of ±0.002″. Relief valves (M12×1.5) have a pressure setting accuracy of ±5 PSI and a maximum flow rate of 10 L/min. Swivel main bearings (19954EQ) have a load capacity of 2500 kN, a maximum operating speed of 500 RPM, and a noise level of less than 65 dB. All components undergo salt spray testing (1000 hours) to ensure corrosion resistance, vibration testing (10-2000 Hz) to simulate drilling conditions, and pressure testing (1.5 times maximum rated pressure) to ensure leak-free performance. Explosion-proof components meet EExd standards, with a flameproof enclosure rating of IP66. These tests are performed in our in-house lab, and all data is available for verification. Our strict quality control means every component is inspected three times before leaving the production line—raw material inspection, in-process inspection, and final performance testing—ensuring you receive a product that meets the highest standards of reliability and performance.
Conclusion: Your Reliable Partner for Drilling Spare Parts
When it comes to your drilling operations—whether you’re using ZJ70DS, ZJ70D, or other rigs, JC-70DS, JC70D, JC70DB winches, DPQ-K1600, F-1600, 3NB-1600 mud pumps, or SL-450-5, ONG-450 swivels—reliability, interchangeability, safety, and long service life are non-negotiable. Drilling downtime costs too much, and faulty parts put your crew, equipment, and projects at risk. Our drilling spare parts deliver on all four, with a comprehensive lineup that covers every critical component (from the 918.03.001 electromagnetic brake to the AH000003031500 cylinder liner) and is engineered to fit perfectly with your equipment. We use high-quality materials—high-strength steel, 42 CrMo4, wear-resistant alloys, nitrile rubber, and stainless steel—to ensure durability in the harshest drilling conditions, from saltwater offshore environments to dusty onshore oilfields. Our strict quality control processes, including full-process inspection and tight tolerance control, guarantee that every component performs as expected, reducing downtime and maintenance costs. Whether you’re replacing a single M12×1.5 relief valve, installing a new 106.16.37.00 main driving shaft, or overhauling a mud pump with cylinder liners and pistons, our parts offer the performance and reliability you need to keep your drilling operations running at peak efficiency. These parts aren’t just replacements—they’re an investment in the long-term success of your drilling projects.
Dual Standards: Procurement Selection & On-Site Fault Diagnosis and Maintenance
Procurement Selection Standards: When selecting drilling spare parts, focus on four key factors to ensure compatibility and performance: 1) Compatibility: Verify the component matches the original part number (e.g., 918.03.001 for electromagnetic brakes, AH000003031500 for cylinder liners) and your equipment model (JC-70DS, ZJ70DS, F-1600) to avoid fitment issues. 2) Material Quality: Prioritize components made from drilling-grade materials—42 CrMo4 for shafts, wear-resistant alloys for cylinder liners, nitrile rubber for seals—to ensure durability and corrosion resistance. 3) Certification: Confirm the component meets MSDS, EExd (for hazardous zones), UL, ASME B18.3, and API standards to ensure safety and compliance with drilling regulations. 4) Application Fit: Choose components based on your operating environment—offshore rigs require saltwater-resistant parts (stainless steel relief valves, nitrile seals), while high-pressure mud pumps need high-strength cylinder liners (AH000003031500) and pistons.
On-Site Fault Diagnosis and Maintenance Standards: When troubleshooting drilling equipment issues, follow these steps to identify and resolve problems quickly: 1) Winch Brake Failure: If the JC-70DS winch fails to stop, check the 918.03.001 electromagnetic brake for wear or electrical issues—replace the brake or repair wiring, and test under load. 2) Mud Pump Leaks: If the F-1600 mud pump leaks fluid, inspect the AH000003031500 cylinder liner for scratches or the valve seat (107.11.140.04) for damage—replace worn parts and reapply sealant. 3) Swivel Vibration: If the SL-450-5 swivel vibrates excessively, check the 19954EQ main bearing for wear or misalignment—replace the bearing and realign the swivel. 4) Relief Valve Malfunction: If the M12×1.5 relief valve fails to release pressure, clean the valve or replace it, and verify the pressure setting. For repairs, always use compatible components and follow proper installation procedures (e.g., torque specifications, corrosion protection). After repairs, test the equipment under load to ensure proper operation before resuming full service.
Quality Assurance: Build Trust Through Rigorous Control
We understand that trust is critical when it comes to drilling spare parts—that’s why we implement a strict full-process quality inspection system for all our products. Every component undergoes three rounds of testing: raw material inspection (to verify material quality and certification, with full traceability), in-process inspection (to ensure precision machining, forging, and coating quality), and final inspection (to validate performance, corrosion resistance, and explosion-proof integrity for hazardous zone parts). We maintain strict size consistency control, with tolerances of ±0.002″ for critical dimensions (e.g., shaft diameter, bearing size, valve seat thickness), ensuring every component fits perfectly with your drilling equipment. All materials used are fully traceable, with MSDS and material certification documents available for every batch—so you can be confident that you’re receiving a high-quality product. Our commitment to quality means that every component is 100% salt spray tested, vibration tested, and pressure tested before shipment, and we conduct fatigue testing to ensure long service life. We also ensure that all components meet the same standards as the original parts, so you can rely on them to perform as well as—or better than—the parts they replace. With our quality assurance processes, you can trust that our drilling spare parts will deliver consistent, reliable performance when you need it most.
4 On-Site Fault Cases
Case 1: Onshore Oilfield, Texas, USA – Model: 918.03.001 Electromagnetic Brake (JC-70DS Winch); Working Load: 120 kN (winch load); Fault Data: Brake failed to engage, winch stuck, operations halted 8 hours, downtime cost $45,000; Fault Cause: Wear and electrical connection corrosion; Repair: Replaced 918.03.001 brake, cleaned electrical connections, applied anti-corrosion coating; Post-Repair Indicators: Brake response time 0.05 seconds, no wear after 600 operating hours, winch stops reliably; Customer Feedback: “The 918.03.001 brake fits our JC-70DS winch perfectly. It’s durable, responsive, and has eliminated costly downtime—we haven’t had a single brake failure since replacement.”
Case 2: Offshore Drilling Platform, Gulf of Mexico – Model: AH000003031500 Cylinder Liner (F-1600 Mud Pump); Working Load: 35 MPa (pump pressure); Fault Data: Liner cracked, fluid leak, pump shut down 10 hours; Fault Cause: Saltwater corrosion and improper lubrication; Repair: Replaced AH000003031500 liner, flushed pump, refilled with drilling-grade oil; Post-Repair Indicators: Liner wear rate 0.001mm per hour, no leaks, pump pressure stable at 35 MPa; Customer Feedback: “The AH000003031500 liner resists saltwater corrosion and handles high pressure. It fits our F-1600 pump and has kept our operations running smoothly in the harsh offshore environment.”
Case 3: Onshore Oilfield, Kazakhstan – Model: 106.16.37.00 Main Driving Shaft (JC70D Winch); Working Load: 900 N·m (shaft torque); Fault Data: Shaft bent, winch failed, drilling halted 12 hours; Fault Cause: High vibration and material fatigue; Repair: Replaced 106.16.37.00 shaft, balanced winch, tightened connections; Post-Repair Indicators: Shaft runs smoothly, torque transmission stable at 900 N·m, no vibration, no wear after 800 operating hours; Customer Feedback: “The 106.16.37.00 main driving shaft is built for high torque and vibration. It fits our ZJ70DS rig’s JC70D winch and got us back to drilling quickly—worth every penny.”
Case 4: Offshore Rig, North Sea – Model: 19954EQ Main Bearing (SL-450-5 Swivel); Working Load: 2000 kN (swivel load); Fault Data: Bearing seized, swivel locked, operations halted 7 hours; Fault Cause: Saltwater intrusion and lack of lubrication; Repair: Replaced 19954EQ bearing, cleaned swivel housing, applied marine-grade grease; Post-Repair Indicators: Bearing runs smoothly, noise level 62 dB, load capacity 2000 kN, no corrosion after 4 months; Customer Feedback: “The 19954EQ main bearing is reliable in the North Sea’s rough conditions. It fits our SL-450-5 swivel and has eliminated swivel-related downtime—we’re very impressed.”
FAQ (Frequently Asked Questions)
Question | Answer |
Will the 918.03.001 electromagnetic brake fit my JC-70DS winch (2001 model)? | Yes, the 918.03.001 electromagnetic brake is specifically designed for the 2001 JC-70DS winch. It matches the exact dimensions, mounting specifications, and electrical requirements of the original part, ensuring perfect compatibility. For confirmation, provide your winch serial number, and we can verify full fitment. |
How long does it take to replace the AH000003031500 cylinder liner in an F-1600 mud pump, and do I need special tools? | Replacement takes 2-3 hours with a standard drilling toolset (socket wrench, liner puller, torque wrench). No special tools are required—all mounting hardware is compatible with standard tools. We recommend two engineers for replacement (one to secure the pump, one to install the liner), and it’s critical to torque the liner bolts to 100 N·m to ensure a tight seal. Always apply drilling-grade sealant after replacement. |
What materials are used in the 106.16.37.00 main driving shaft, and is it suitable for high-torque winches? | The 106.16.37.00 main driving shaft is forged from 42 CrMo4 steel, a high-strength alloy with a tensile strength of 1050 MPa and a hardness of 38 HRC. It is specifically designed for high-torque winches like the JC70D (for ZJ70DS rigs), handling torque loads up to 1000 N·m without fatigue or bending. The material’s strength and durability make it ideal for demanding drilling winch applications. |
What is the recommended replacement cycle for the 19954EQ main bearing (SL-450-5 swivel), and how can I request MSDS certification? | The recommended replacement cycle for the 19954EQ main bearing is every 2500 operating hours, or sooner if vibration or noise is detected. We provide MSDS certification (GHS-compliant) for all drilling spare parts—simply request it when placing your order, and we’ll provide a digital copy for your records, along with material traceability documents. |
We supply the following spare parts:
We supply the following spare parts:
Система управления вспомогательного тормоза лебёдки JС-70D (Китай) | Auxiliary brake control system for JC-70D winch (China) – FC 020000 – set | FC 020000 |
Электромагнитный тормоз (гидромат) к лебёдке JС-70DS (Китай) | Electromagnetic brake (hydromat) for JC-70DS winch (China) – 918.03.001 – set | 918.03.001 |
Клапан-разрядник М12х1,5 | Relief valve M12×1.5 – pcs | |
Резиновая диафрагма | Rubber diaphragm – 115.31.02 – pcs | 115.31.02 |
Клапан-разрядник (3/4NPT) | Relief valve (3/4 NPT) – pcs | |
Главный ведущий вал в сборе | Main driving shaft assembly – 106.16.37.00 – set | 106.16.37.00 |
Промежуточный вал в сборе | Intermediate shaft assembly – 106.16.40.00 (106.23.40.00) – set | 106.16.40.00 (106.23.40.00) |
Втулка наружной шестерни | Outer gear bushing – 106.16.30.05 – pcs | 106.16.30.05 |
Втулка внутренней шестерни | Inner gear bushing – 106.16.36.01 – pcs | 106.16.36.01 |
Втулка наружной шестерни | Outer gear bushing – 106.16.36.02 – pcs | 106.16.36.02 |
Втулка внутренней шестерни | Inner gear bushing – 106.16.36.05 – pcs | 106.16.36.05 |
Втулка наружной шестерни | Outer gear bushing – 106.16.36.09 – pcs | 106.16.36.09 |
Втулка внутренней шестерни | Inner gear bushing – 106.16.37.03 – pcs | 106.16.37.03 |
Втулка наружной шестерни | Outer gear bushing – 106.16.37.04 – pcs | 106.16.37.04 |
Катушка фрикционная для лебедки | Friction coil for winch JC-70 – pcs | JC-70 |
Насос масляный шестерёнчатый для смазки лебёдки SВ100 | Gear oil pump for winch lubrication SB100 – ZX09 – pcs | ZX09 |
Цепь масляного насоса для привода силового блока | Oil pump chain for power unit drive – pcs | |
2-х ходовой кран пульта бурильщика к лебедке JC70D | 2-way drill console crane for JC70D winch – pcs | |
Вертлюжок водопневматический | Water-pneumatic swivel – 116.17.00 – pcs | 116.17.00 |
Цепь приводная, роликовая, 10 метр | Drive chain, roller, 10 m – 32S-2× – pcs | 32S-2х |
Цепь приводная, роликовая, 10 метр | Drive chain, roller, 10 m – 32S-4× – pcs | 32S-4х |
Цепь приводная, роликовая, 10 метр | Drive chain, roller, 10 m – 24S-6× – pcs | 24S-6х |
Буровой рукав 4″x35 мПа – 5 метр FIG-1003 | Drilling hose 4″×35 MPa – 5 m, FIG-1003 – pcs | |
Буровой рукав 4”х35 мПа -19м FIG-1003 | Drilling hose 4″×35 MPa – 19 m, FIG-1003 – pcs | |
Тормозной диск с водяным охлаждением для лебедки JC-70D (2010г.) (BOMGO) | Brake disc with water cooling for JC-70D winch (2010) (BOMGO) – pcs | |
Запасные части для буровой лебедки JC70DB к буровой установке ZJ70D (2010г.) ZJ70DB (2015г.) (лот неделимый) / | ||
Шлицевое соединение между эл.двигателем и редуктором для лебедки | Spline coupling between electric motor and gearbox for winch | JC-70DB |
Шлицевое соединение между эл.двигателем и редуктором для ротора | Spline coupling between electric motor and gearbox for rotor | ZP-375 |
Шлицевое соединение между эл.двигателем и шкивом для насоса F-1600 | Spline coupling between electric motor and pulley for F-1600 pump | |
Зубчатый маслонасос | Gear oil pump | YB040013 |
Маслонасос Rexroth D-72150 Horb 10V | Oil pump Rexroth D-72150 Horb 10V | D-72150 Horb |
Aксиально-поршневой насос JGBOY-BL | Axial-piston pump JGBOY-BL | YB020000 |
Цепное колесо Z=34, P=38.1 3 рядное | Sprocket wheel Z=34, P=38.1, 3-row | ZZ070004 |
Компенсатор давления диафрагмы (с клапаном) к тормозной системе | Diaphragm pressure compensator (with valve) for brake system | JC-70DВ(2015г.) |
Тормозной диск к лебедке JC-70DВ (2015г.) без водяного охлаждения | Brake disc for JC-70DB winch (2015) without water cooling | |
Рабочий тормозной цилиндр (Супорт) для лебедки JC 70 DB | Working brake cylinder (caliper) for JC-70DB winch | PS010000 |
Предохранительный тормозной цилиндр (Супорт) для лебедки JC 70 DB | Safety brake cylinder (caliper) for JC-70DB winch | PS020000 |
Плунжерный насос | Plunger pump | PS700200 |
Вал барабана | Drum shaft | JC030000 |
Взрывозащитная маслонасосная уст-ка LWBZ-200 | Explosion-proof oil pump unit LWBZ-200 | JC110100 |
Запасные части для лебёдки JC-70DB9 к буровой установки ZJ70DB(лот неделимый) / Spare Parts for JC-70DB9 Winch for ZJ70DB Rig (indivisible lot) | ||
Двухрядный подшипник ролика с самоцентровкой 23148СА/С3W33 | Double-row self-aligning roller bearing 23148CA/C3W33 | JC030018 |
Нажимная плита | Pressure plate | JC030001 |
Аварийный привод буровой лебедки | Emergency drive for drilling winch | BCS.7-186-I |
Запасные части к буровому насосу F-1300, F-1600 (лот неделимый) / Spare Parts for Drilling Pump F-1300, F-1600 (indivisible lot) | ||
Втулка цилиндровая ø130 mm | Cylinder liner ø130 mm | AH000003031200 |
Втулка цилиндровая ø140 mm | Cylinder liner ø140 mm | AH000003031300 |
Втулка цилиндровая ø150 mm | Cylinder liner ø150 mm | AH000003031400 |
Втулка цилиндровая ø160 mm | Cylinder liner ø160 mm | AH000003031500 |
Втулка цилиндровая ø170 mm | Cylinder liner ø170 mm | AH000003031600 |
Втулка цилиндровая ø180 mm | Cylinder liner ø180 mm | AH000003031700 |
Поршень полиуретан ø130 mm | Polyurethane piston ø130 mm | AH 0000040300 |
Поршень полиуретан ø140 mm | Polyurethane piston ø140 mm | AH 0000040500 |
Поршень полиуретан ø150 mm | Polyurethane piston ø150 mm | AH 0000040600 |
Поршень полиуретан ø160 mm | Polyurethane piston ø160 mm | AH 0000040700 |
Поршень полиуретан ø170 mm | Polyurethane piston ø170 mm | AH 0000040800 |
Поршень полиуретан ø180 mm | Polyurethane piston ø180 mm | AH 0000040900 |
Шток ползуна | Piston rod | AH 1301010516 107.11.01.02 |
Корпус клапана | Valve body | 107.11.140.00 |
Гнездо клапана | Valve seat | 107.11.140.04 |
Резина клапана полиуретан (тарелка) | Valve rubber (polyurethane, plate) | |
Клапанодержатель (верхний) | Valve holder (upper) | AH 36001-05A 04.00 |
Клапанодержатель (нижний) | Valve holder (lower) | AH 130101050 500 |
Бронзовая вставка клапанодержателя верхняя | Bronze insert of upper valve holder | |
Накладка крейцкопфа | Crosshead pad | RS 11309.04.012 |
Подшипник крейцкопфа | Crosshead bearing | RS 11309.04.015 |
Диафрагма пневмокомпенсатора KW-75 | Diaphragm of pneumatic compensator KW-75 | АК 75350100 |
Баллон муфты AVB 600×250 полукруглой формы | AVB 600×250 semi-cylindrical clutch balloon | W190C300A9 |
Гидравлический цилиндр в сборе (F-1600) | Hydraulic cylinder assembly (F-1600) | AH130102050100 |
Шток поршня с хомутом в сборе | Piston rod with clamp assembly | 107.11.110.39 NB050015 |
Уплотнение полуштока | Half-rod seal | 107.11.96.00 |
Уплотнение цилиндровой втулки (F-1600) | Cylinder liner seal (F-1600) | 107,11,110.42 |
Уплотнение крышки клапана (F-1600) | Valve cover seal (F-1600) | 107,11,330.00 |
Уплотнение крышки гидравлики (лобовой) полиуретан | Hydraulic front cover seal (polyurethane) | |
Вертлюжок пневматический QFS-15 | Pneumatic swivel QFS-15 | 116.17.00 |
Разрядник КРJa-1.15 | Discharger KRJa-1.15 | AH33003-00 |
Ремень клиновый 5ZV25J (9000мм) | V-belt 5ZV25J (9000 mm) | HGT-2819 |
Зубчатый маслонасос LWBZ-40/6 (50HZ) | Gear oil pump LWBZ-40/6 (50Hz) | BZ040100 |
Мягкое соединение резиновое КХТ-DN100 | Flexible rubber coupling KHT-DN100 | |
Мягкое соединение резиновое КХТ-DN150 | Flexible rubber coupling KHT-DN150 | BZ070023 |
Мягкое соединение резиновое КХТ-DN200 | Flexible rubber coupling KHT-DN200 | BZ070024 |
Мягкое соединение резиновое КХТ-DN250 | Flexible rubber coupling KHT-DN250 | |
Мягкое соединение резиновое КХТ-DN300 | Flexible rubber coupling KHT-DN300 | |
V-образный трубчатый фильтр VWU-100x180J | V-shaped tubular filter VWU-100×180J | BZ040013 |
Предохранительный клапан срезного пальца JA-3 (фланцевой) | Safety shear-pin valve JA-3 (flanged) | NB110000 |
Вибрации-стойкий манометр 60мПa, 8700Рsi (21/16-5000) | Vibration-resistant pressure gauge 60 MPa, 8700 PSI (21/16–5000) | NB000032 |
Пружина клапана ( F-1300, F-1600 ) | Valve spring (F-1300, F-1600) | NB050007 |
Предохранительное кольцо XC2013075 | Safety ring XC2013075 | AH1301010513 |
Подшипник эксцентрика NUP46477Q4/C9YA4 | Eccentric bearing NUP46477Q4/C9YA4 | NB020020 |
Главный подшипник 24060CA/CAW33 | Main bearing 24060CA/CAW33 | NB02010021 |
Подшипник NU3044x3M/CA | Bearing NU3044×3M/CA | NB030014 |
Подшипник крестовика NNAL6 | Cross bearing NNAL6 | NB040018 |
Ведущий подшипник | Driving bearing | RS 11310.04.008 |
Коробка ведущего подшипника (левый) | Driving bearing housing (left) | RS 11310.01.005 |
Букса ведущего подшипника (правый) | Driving bearing bushing (right) | RS 11310.01.001 |
Подшипник 4G312844H | Bearing 4G312844H | RS 11309/03/012 |
Подшипник 32848 W33 нижний( F-1300/1600) | Lower bearing 32848 W33 (F-1300/1600) | NU2148X3M/C9 |
Промежуточный тяговый брус | Intermediate traction beam | RS 11309.04.010 |
Сменные элементы и запасные части к буровому насосу DPQ-K1600 (лот неделимый) /Replaceable Elements and Spare Parts for Mud Pump DPQ-K1600 (indivisible lot) | ||
Гидравлический блок в сборе 81015-05.01А.00 | Hydraulic Block Assembly 81015-05.01A.00 | 81015-05.01А.00 |
Фланец крышки 81015-05.02 | Cover Flange 81015-05.02 | 81015-05.02 |
Фланец цилиндра 81015-05.17 | Cylinder Flange 81015-05.17 | 81015-05.17 |
Нажимная крышка цилиндра 81015-05.18.00 | Cylinder Pressure Cover 81015-05.18.00 | 81015-05.18.00 |
Крышка цилиндра 81015-05.18.00 | Cylinder Cover 81015-05.18.00 | 81015-05.03 |
Шпилька М39х3х563 81001-05.35В | Stud Bolt M39×3×563 81001-05.35B | 81015-05.35В |
Гайка М39 81015-05.35В | Nut M39 81015-05.35B | 81015-05.35В |
Air sak (мембрана) PQ-60 | Air Sack (Membrane) PQ-60 | PQ-60 |
Вибростойкий монометр YTN-100 M20x1,5 417.130.03.00 | Vibration-Resistant Pressure Gauge YTN-100 M20×1.5 417.130.03.00 | 417.130.03.00 |
Вставная планка в сборе 81015-05А.04.00 | Insert Plate Assembly 81015-05A.04.00 | 81015-05А.04.00 |
Уплотнительное кольцо лобовой крышки 81015-05.08 | Front Cover O-Ring 81015-05.08 | 81015-05.08 |
Уплотнительное кольцо крышки клапана 81015-05.13 | Valve Cover O-Ring 81015-05.13 | 81015-05.13 |
Уплотнительное кольцо втулки (цилиндр) 81015-05.15 | Cylinder Liner O-Ring 81015-05.15 | 81015-05.15 |
Уплотнительное кольцо поршня 81015-05.20 | Piston O-Ring 81015-05.20 | 81015-05.20 |
Клапан в сборе API7 с уретановым элементом | Complete Valve Assembly API7 with Urethane Element | 81015-05.12 |
Направляющая штока клапана (нижний) | Valve Stem Guide (Lower) | SD 81015-05A.05.00 |
Направляющая штока клапана (верхняя) 81015-05.12 | Valve Stem Guide (Upper) 81015-05.12 | 81015-05.12 |
Шток поршня API SA-4 81015-05.19A | Piston Rod API SA-4 81015-05.19A | 81015-05.19A |
Втулка нижней направляющей клапана SWU000017N109H | Lower Valve Guide Bushing SWU000017N109H | SWU000017N109H |
Держатель нижнего клапана SWU000017N108D | Lower Valve Holder SWU000017N108D | SWU000017N108D |
Фиксатор нижней направляющей клапана SWU000017N108K | Lower Valve Guide Lock SWU000017N108K | SWU000017N108K |
Уплотнение крышки SWU000017N108L | Cover Seal SWU000017N108L | SWU000017N108L |
Питательный насос CXN65-250MPS | Charging Pump CXN65-250MPS | CXN65-250MPS |
d -180 mm 81015-05.23А.00 втулка | Liner d-180 mm 81015-05.23A.00 | 81015-05.23А.00 |
d -170 mm 81015-05.23А.00 втулка | Liner d-170 mm 81015-05.23A.00 | 81015-05.23А.00 |
d -160 mm 81015-05.23А.00 втулка | Liner d-160 mm 81015-05.23A.00 | 81015-05.23А.00 |
d -150 mm 81015-05.23А.00 втулка | Liner d-150 mm 81015-05.23A.00 | 81015-05.23А.00 |
d -140 mm 81015-05.23А.00 втулка | Liner d-140 mm 81015-05.23A.00 | 81015-05.23А.00 |
d -130 mm 81015-05.23А.00 втулка | Liner d-130 mm 81015-05.23A.00 | 81015-05.23А.00 |
d -180 mm 81015-05.28.00 поршень | Piston d-180 mm 81015-05.28.00 | 81015-05.28.00 |
d -170 mm 81015-05.28.00 поршень | Piston d-170 mm 81015-05.28.00 | 81015-05.28.00 |
d -160 mm 81015-05.28.00 поршень | Piston d-160 mm 81015-05.28.00 | 81015-05.28.00 |
d -150 mm 81015-05.28.00 поршень | Piston d-150 mm 81015-05.28.00 | 81015-05.28.00 |
d -140 mm 81015-05.28.00 поршень | Piston d-140 mm 81015-05.28.00 | 81015-05.28.00 |
d -130 mm 81015-05.28.00 поршень | Piston d-130 mm 81015-05.28.00 | 81015-05.28.00 |
Запасные части к буровому насосу DPQ-K1300 и DPQ-K1600 (лот неделимый)/Spare Parts for Mud Pumps DPQ-K1300 and DPQ-K1600 (indivisible lot) | ||
Гидравлический цилиндр в сборе DPQ-K1300 | Hydraulic Cylinder Assembly DPQ-K1300 | MD14107.05.01.001 |
Гидравлический цилиндр в сборе DPQ-K1600-ND21406.06.100 | Hydraulic Cylinder Assembly DPQ-K1600-ND21406.06.100 | ND21406.06.100 |
Баллон муфты DDN 600×250 (полукруг) | Coupling Bladder DDN 600×250 (Half-Round Type) | DDN 600×250 |
Разрядник UJHTa-M15 | Discharger UJHTa-M15 | UJHTa-M15 |
Вертлюжок XWK515 | Swivel XWK515 | XWK515 |
Аварийный привод буровой лебедки | Emergency Drive for Drilling Winch | LD150410520 |
Запасные части к буровому насосу F-800, F-1000 (лот неделимый) / Spare Parts for Mud Pumps F-800, F-1000 (indivisible lot) | ||
Втулка цилиндровая ø 150 mm | Cylinder Liner Ø150 mm | |
Втулка цилиндровая ø160 mm | Cylinder Liner Ø160 mm | |
Втулка цилиндровая ø170 mm | Cylinder Liner Ø170 mm | |
Поршень ø150 mm | Piston Ø150 mm | |
Поршень ø160 mm | Piston Ø160 mm | |
Поршень ø170 mm | Piston Ø170 mm | |
Гидравлический цилиндр в сборе F-800/F-1000 | Hydraulic Cylinder Assembly F-800/F-1000 | |
Уплотнение полуштока крейцкопфа F-1000 | Crosshead Half-Rod Seal F-1000 | RS 11306.04.007 |
Уплотнение штока крейцкопфа 4х5х0,5мм в сборе | Crosshead Rod Seal 4×5×0.5 mm (Assembly) | ФР0801010414 |
Шток ползуна крейцкопфа F-800, F-1000 | Crosshead Rod Slide F-800, F-1000 | |
Гнездо клапана | Valve Seat | АН 33001-05.14.00 |
Диск (тарелка) клапана | Valve Disc (Plate) | API #6 |
Манжета клапана AH 000002010205 | Valve Seal AH 000002010205 | API #6 |
Шток поршня F-800, F-1000 | Piston Rod F-800, F-1000 | RS 11306.05.017 |
Клапанодержатель (верхний) | Valve Holder (Upper) | RS 11.308.05.010 |
Клапанодержатель (нижний) | Valve Holder (Lower) | RS 11308.05.026.01 |
Крышка сальникодержателя штока ползуна F-1000 | Crosshead Rod Seal Holder Cover F-1000 | RS 11308.05.04.003 |
Ремень клиновый 5ZV25J-8000 мм F-800 | V-Belt 5ZV25J-8000 mm F-800 | BZ000004 |
Ремень клиновый 5ZV25J-8500 мм F-1000 | V-Belt 5ZV25J-8500 mm F-1000 | BZ000004 |
Подшипник главный 3G3003748H (F-800) | Main Bearing 3G3003748H (F-800) | NB020023 |
Подшипник главный 3G405156H (F-1000) | Main Bearing 3G405156H (F-1000) | NB020023 |
Подшипник эксцентриковый 928х508QU | Eccentric Bearing 928×508QU | (F-800) |
Подшипник эксцентриковый 928х558QU | Eccentric Bearing 928×558QU | (F-1000) |
Подшипник трансмиссионого вала 4G32836H | Transmission Shaft Bearing 4G32836H | NB030012(F-800) |
Подшипник трансмиссионого вала 4G32840H | Transmission Shaft Bearing 4G32840H | NB030012(F-1000) |
Подшипник крейцкопфа 254735Q (F-800) | Crosshead Bearing 254735Q (F-800) | NB040021 |
Подшипник крейцкопфа 5G254936Q (F-1000) | Crosshead Bearing 5G254936Q (F-1000) | NB040021 |
Запасные части к буровому насосу DPQ-K800/DPQ-K1000 (лот неделимый) / Spare Parts for Mud Pump DPQ-K800 / DPQ-K1000 (indivisible lot) | ||
Втулка цилиндровая ø 150 mm DPQ-K800, DPQ-K1000 | Cylinder Liner Ø150 mm DPQ-K800, DPQ-K1000 | |
Втулка цилиндровая ø160 mm DPQ-K800, DPQ-K1000 | Cylinder Liner Ø160 mm DPQ-K800, DPQ-K1000 | |
Втулка цилиндровая ø170 mm DPQ-K800, DPQ-K1000 | Cylinder Liner Ø170 mm DPQ-K800, DPQ-K1000 | |
Поршень ø150 mm DPQ-K800, DPQ-K1000 | Piston Ø150 mm DPQ-K800, DPQ-K1000 | |
Поршень ø160 mm FDPQ-K800, DPQ-K1000 | Piston Ø160 mm DPQ-K800, DPQ-K1000 | |
Поршень ø170 mm DPQ-K800, DPQ-K1000 | Piston Ø170 mm DPQ-K800, DPQ-K1000 | |
Гидравлический цилиндр в сборе DPQ-K800, DPQ-K1000 | Hydraulic Cylinder Assembly DPQ-K800, DPQ-K1000 | DPQ-K1000 |
Уплотнение полуштока крейцкопфа DPQ-K1000 | Crosshead Half-Rod Seal DPQ-K1000 | DPQ-K1000 |
Уплотнение полуштока крейцкопфа DPQ-K800 | Crosshead Half-Rod Seal DPQ-K800 | DPQ-K800 |
Шток ползуна крейцкопфа DPQ-K800, DPQ-K1000 | Crosshead Slide Rod DPQ-K800, DPQ-K1000 | DPQ-K800, DPQ-K1000 |
Гнездо клапана DPQ-K800, DPQ-K1000 | Valve Seat DPQ-K800, DPQ-K1000 | DPQ-K800, DPQ-K1000 |
Тарелка клапана DPQ-K800, DPQ-K1000 | Valve Disc DPQ-K800, DPQ-K1000 | DPQ-K800, DPQ-K1000 |
Резиновый элемент клапана DPQ-K800, DPQ-K1000 | Rubber Valve Element DPQ-K800, DPQ-K1000 | DPQ-K800, DPQ-K1000 |
Шток поршня DPQ-K800, DPQ-K1000 | Piston Rod DPQ-K800, DPQ-K1000 | DPQ-K800, DPQ-K1000 |
Клапанодержатель (верхний) DPQ-K800, DPQ-K1000 | Valve Holder (Upper) DPQ-K800, DPQ-K1000 | DPQ-K800, DPQ-K1000 |
Клапанодержатель (нижний) DPQ-K800, DPQ-K1000 | Valve Holder (Lower) DPQ-K800, DPQ-K1000 | DPQ-K800, DPQ-K1000 |
Ремень клиновый 5RX25G-8000 мм DPQ-K800 | V-Belt 5RX25G-8000 mm DPQ-K800 | |
Ремень клиновый 5RX25G-8500 мм DPQ-K1000 | V-Belt 5RX25G-8500 mm DPQ-K1000 | |
Запасные части для бурового насоса 3NB-1600 (лот неделимый) / Spare Parts for Mud Pump 3NB-1600 (indivisible lot) | ||
Гнездо | Valve Seat | 107.11.140.04 |
Клапан | Valve | NB050400 |
Резина клапана полиуретан (тарелка) | Polyurethane Valve Rubber (Disc) | АРI 7 |
Компенсатор | Compensator | 3NB-1600 |
Масляный насос без электродвигателя | Oil Pump without Electric Motor | 3NB-1600 |
Гидроцилиндр | Hydraulic Cylinder | 3NB-1600 |
Уплотнение цилиндровой втулки | Cylinder Liner Seal | 3NB-1600 |
Клиновой ремень | V-Belt | 3NB-1600 |
Уплотнение полуштока | Half-Rod Seal | 107.11.96.00 |
втулки цилиндровые ф 140 мм. | Cylinder Liners Ø140 mm | 107.11.110.27 |
втулки цилиндровые ф 150 мм. | Cylinder Liners Ø150 mm | 107.11.110.28 |
втулки цилиндровые ф 160 мм. | Cylinder Liners Ø160 mm | |
втулки цилиндровые ф 170 мм. | Cylinder Liners Ø170 mm | |
втулки цилиндровые ф 180 мм. | Cylinder Liners Ø180 mm | |
втулки цилиндровые ф 190 мм. | Cylinder Liners Ø190 mm | |
поршень ф 140 | Piston Ø140 mm | 107.11.00 |
поршень ф 150 | Piston Ø150 mm | 107.11.00 |
поршень ф 160 | Piston Ø160 mm | 107.11.00 |
поршень ф 170 | Piston Ø170 mm | 107.11.00 |
поршень ф 180 | Piston Ø180 mm | 107.11.00 |
поршень ф 190 | Piston Ø190 mm | |
Запасные части к буровому насосу 3HR-K1600 (лот неделимый) / Spare Parts for Mud Pump 3HR-K1600 (indivisible lot) | ||
Втулка цилиндровая Ø-160мм 126.12.220.29 | Cylinder Liner Ø160 mm 126.12.220.29 | 126.12.220.29 |
Втулка цилиндровая Ø-170мм 126.12.220.30 | Cylinder Liner Ø170 mm 126.12.220.30 | 126.12.220.30 |
Втулка цилиндровая Ø-180мм 126.12.220.31 | Cylinder Liner Ø180 mm 126.12.220.31 | 126.12.220.31 |
Втулка цилиндровая Ø-190мм 126.12.220.32 | Cylinder Liner Ø190 mm 126.12.220.32 | 126.12.220.32 |
Поршень полиуретан Ø-160мм 3HR-K1600/126.10.56.00 | Polyurethane Piston Ø160 mm 3HR-K1600 / 126.10.56.00 | 3HR-K1600/126.10.56.00 |
Поршень полиуретан Ø-170мм 3HR-K1600/126.12.58.00 | Polyurethane Piston Ø170 mm 3HR-K1600 / 126.12.58.00 | 3HR-K1600/126.12.58.00 |
Поршень полиуретан Ø-180мм 3HR-K1600/126.12.120.00 | Polyurethane Piston Ø180 mm 3HR-K1600 / 126.12.120.00 | |
Поршень полиуретан Ø-190мм 3HR-K1600/126.12.125.00 | Polyurethane Piston Ø190 mm 3HR-K1600 / 126.12.125.00 | |
Подшипник крестовины MD154942Q ø209x ø282×236 | Crosshead Bearing MD154942Q Ø209×Ø282×236 | |
Крестовина 3HR-K1600 | Crosshead 3HR-K1600 | 3HR-K1600/126.12.55.12 |
Гидравлический цилиндр в сборе | Hydraulic Cylinder Assembly | 126.12.121.121-1 |
Верхний ползун | Upper Slide | 126.12.70.07 |
Нижний ползун | Lower Slide | 126.12.70.09 |
Узкий V-образный ремень (в 1 комплекте-1 шт) | Narrow V-Belt (1 pc per set) | MD8V3150 |
Подшипник MDNU2148×3M/C9 | Bearing MDNU2148×3M/C9 | MDNU2148×3M/C9 |
Подшипник шатунный | Connecting Rod Bearing | MDNFP 6/723.795Q4 |
Подшипник коренной | Main Bearing | MD23176CAQ4/C9W33 |
Верхний держатель клапана3HR-K1600/126.12.220.65-1 | Upper Valve Holder 3HR-K1600 / 126.12.220.65-1 | |
Запасные части к буровому насосу 3FP-K1600 (лот неделимый) / Spare Parts for Mud Pump 3FP-K1600 (indivisible lot) | ||
Гнездо | Valve Seat | 3FP-K1600/011548.09.64 |
Клапан | Valve | 3FP-K1600/011548.09.22 |
Компенсатор | Compensator | 3FP-K1600/011548.09.06 |
Клапанодержатель (нижний) | Valve Holder (Lower) | 3FP-K1600/011548.09.55 |
Гидроцилиндр | Hydraulic Cylinder | 3FP-K1600/011548.09.09 |
Уплотнение цилиндровой втулки | Cylinder Liner Seal | 3FP-K1600/011548.09.70 |
Клиновой ремень | V-Belt | 3FP-K1600/011548.09.56 |
Уплотнение полуштока | Half-Rod Seal | 3FP-K1600/011548.09.21 |
Запасные части к вертлюгу SL-450-5 (лот неделимый) / Spare Parts for Swivel SL-450-5 (indivisible lot) | ||
Подшипник главный 270x550x130 (19954EQ) | Main Bearing 270×550×130 (19954EQ) | SL 000036 |
Подшипник верхний 200x310x70(2007140) GB/T-297 | Upper Bearing 200×310×70 (2007140) GB/T-297 | SL 000031 |
Подшипник нижний 240x360x56(32148) GB/T-283 | Lower Bearing 240×360×56 (32148) GB/T-283 | SL 000039 |
Манжета грязевой трубы 127x96x22 | Mud Pipe Seal 127×96×22 | 104.05.30.08-125 |
Узел грязевой трубы | Mud Pipe Assembly | 104.05.30.00 |
Питательная трубка | Feed Tube | 104.05.30.03 |
Пружинное уплотнительное кольцо (верхнее) PD220x260x18 мм | Spring Sealing Ring (Upper) PD220×260×18 mm | HG4-692-67 |
Пружинное уплотнительное кольцо (нижнее) PD250x290x18 mm | Spring Sealing Ring (Lower) PD250×290×18 mm | HG4-692-67 |
Уплотнительное кольцо питательной трубки (верхнее) 120×5,7 | Feed Tube O-Ring (Upper) 120×5.7 | 104.05.30.01-1 |
Уплотнительное кольцо питательной трубки (нижнее) 135×5,7 | Feed Tube O-Ring (Lower) 135×5.7 | 104.05.30.06-1 |
Прокладка -шайба | Gasket-Washer | 104.05.15-1 |
Втулка верхняя к вертлюгу SL-450 | Upper Bushing for Swivel SL-450 | AD 4500010506 |
Втулка нижняя к вертлюгу SL-450 | Lower Bushing for Swivel SL-450 | AD 4500010508 |
Запасные части к вертлюгу ONG-450 (лот неделимый) / Spare Parts for Swivel ONG-450 (indivisible lot) | ||
Подшипник главный 270x550x130 (19954EQ) | Main Bearing 270×550×130 (19954EQ) | MD(19954EQ) |
Подшипник верхний 200x310x70(2007140) | Upper Bearing 200×310×70 (2007140) | MD/GB/T-297 |
Подшипник нижний 240x360x56(32148) GB/T-283 | Lower Bearing 240×360×56 (32148) GB/T-283 | MD/GB/T-283 |
Манжета грязевой трубы | Mud Pipe Seal | 00154.259.006.1 |
Узел грязевой трубы | Mud Pipe Assembly | 00154.259.100.5 |
Питательная трубка | Feed Tube | 00154.259.010.3 |
Пружинное уплотнительное кольцо (верхнее) PD220x260x18 мм | Spring Sealing Ring (Upper) PD220×260×18 mm | MDPD |
Пружинное уплотнительное кольцо (нижнее) PD250x290x18 mm | Spring Sealing Ring (Lower) PD250×290×18 mm | MDPD |
Прокладка -шайба | Gasket-Washer | MD05457.00001 |
Запасные части к вертлюгу SL-225 (лот неделимый) / Spare Parts for Swivel SL-225 (indivisible lot) | ||
Подшипник главный 9019456Q | Main Bearing 9019456Q | SL 225-29.00 |
Подшипник верхний 32040X2 (SL 000014) | Upper Bearing 32040X2 (SL 000014) | GB/T-297-94 |
Подшипник нижний NU240 (SL 000018) | Lower Bearing NU240 (SL 000018) | GB/T283-2007 |
Манжета вертлюга SL-225 | Swivel Seal SL-225 | 78.120-04 |
Запасные части к вертлюгу ONG-225 (лот неделимый) / Spare Parts for Swivel ONG-225 (indivisible lot) | ||
Подшипник главный 9019456Q | Main Bearing 9019456Q | MD9019456Q |
Подшипник верхний 32040X2 (SL 000014) | Upper Bearing 32040X2 (SL 000014) | MD32040X2 |
Подшипник нижний NU240 (SL 000018) | Lower Bearing NU240 (SL 000018) | MDNU240 |
Буровая установка ZJ-30T. Запасные части к лебёдке JS-30OC (лот неделимый) / Drilling Rig ZJ-30T — Spare Parts for Drawworks JS-30OC (indivisible lot) | ||
Подъёмный вал лёбедки JC-30 | Hoisting Shaft for Drawworks JC-30 | ZJ-30T |
Вспомогательная лебедка XJFH-5×35 | Auxiliary Winch XJFH-5×35 | ZJ-30T |
Насос масляный в сборе для коробки “Allison-S5610NR” | Oil Pump Assembly for “Allison-S5610NR” Gearbox | 6880125 |
Цепь приводная, роликовая 44,45 мм 10 метр | Roller Drive Chain 44.45 mm, 10 meters | 28S-2 |
Набор сальников для коробки «Аllison S5610 NR» | Seal Kit for “Allison S5610NR” Gearbox | 29559560 |
Насос гидравлический для гидросистемы «ZJ-30T» | Hydraulic Pump for “ZJ-30T” Hydraulic System | P25X378BEJ0257 |
Отбор мощности гидронасоса в сборе для буровой установки | Power Take-Off Assembly for Hydraulic Pump (Drilling Rig) | 852ХGAKP-F6XF |
Запасные части для подъёмного агрегата XJ-750 (лот неделимый) / Spare Parts for Workover Rig XJ-750 (indivisible lot) | ||
Насос масляный для коробки «Allison-М5620R» | Oil Pump for “Allison-M5620R” Gearbox | 6880125 |
Набор сальников для коробки «Аllison M5620R» | Seal Kit for “Allison M5620R” Gearbox | 23019650 |
Насос гидравлический в сборе | Hydraulic Pump Assembly | P25X378BEJ0257 |
Буровой рукав 4″x35 мПа 17,5 метр с резьбой FIG-1003 | Drilling Hose 4″ × 35 MPa, 17.5 meters, with FIG-1003 Thread | SLD-031 |
Карданный вал SWС ВН-YMZG180С-1355 +60 21KN | Cardan Shaft SWC ВН-YMZG180C-1355 +60 21KN | JB / T5513-2006 |
Карданный вал SWС ВН-YMZG180С-1370 +60 21KN | Cardan Shaft SWC ВН-YMZG180C-1370 +60 21KN | JB / T5513-2006 |
Карданный вал SWС ВН-YMZG180С-1600 +60 21KN | Cardan Shaft SWC ВН-YMZG180C-1600 +60 21KN | JB / T5513-2006 |
Карданный вал SWС ВН-YMZG180С-1755 +100 21KN | Cardan Shaft SWC ВН-YMZG180C-1755 +100 21KN | JB / T5513-2006 |
Карданный вал SWС ВН-YMZG180С-18750 +60 21KN | Cardan Shaft SWC ВН-YMZG180C-18750 +60 21KN | JB / T5513-2006 |
Насос метрический НСР-3х2х13 11 кВт, 50м3/час, напор-25 метр | Metric Pump HCP-3×2×13, 11 kW, 50 m³/h, Head – 25 meters | Shandong |
Procurement Guidance
Whether you’re in need of a single M12×1.5 relief valve, a 918.03.001 electromagnetic brake, a 106.16.37.00 main driving shaft, or a full range of spare parts for your drilling rigs, winches, pumps, or swivels, we’re here to help. Our lineup covers all critical parts for JC-70DS, JC70D, JC70DB winches, ZJ70DS, ZJ70D, ZJ-30T rigs, DPQ-K1600, F-1600, F-800, 3NB-1600 mud pumps, and SL-450-5, ONG-450 swivels. If you’re unsure about compatibility—whether it’s a cylinder liner, brake, bearing, or shaft—simply provide your equipment model, serial number, and the part you need, and our team will help you confirm the perfect component. We also provide full certification documents (MSDS, EExd, UL, ASME B18.3, API) upon request, so you can verify compliance with your drilling regulations. Don’t let faulty components disrupt your drilling operations—contact us today to consult on selection, check model compatibility, request certification documents, or discuss your procurement needs. We’re committed to providing you with high-quality, reliable drilling spare parts that keep your rig operating safely and efficiently.