Canrig TDS Series Top Drive OEM Spare Parts (H03-1051-010, AY11701, M16-1000-01A)

1. Core Product Overview & Target Application Value

1.1 Exact Equipment Matching & User Core Demand

This full-spectrum OEM spare parts lineup is exclusively calibrated for Canrig TDS series top drive systems, including mainstream models like TDS-8SA, TDS-9SA, TDS-10SA, and TDS-11SA. It covers hydraulic directional valves, hex nuts, compression springs, O-ring kits, disc brake assemblies, seal kits, torque boost components, RTD sensors, pinion gears, and electrical modules. Tailored for onshore deep-well contractors, offshore platform maintenance teams, and rig overhaul specialists, these parts resolve persistent field pain points: hydraulic flow deviation, brake torque attenuation, electrical signal drift, seal degradation, and gear wear under 24-hour heavy cyclic loads. All products comply with API 7K drilling machinery standards and ISO 9001 quality certification, ensuring full dimensional and functional interchangeability with original Canrig components.

1.2 Authoritative Verified Performance & Exclusive Field Data

Validated through 7200 hours of continuous bench testing and harsh oilfield deployment, these parts deliver industry-leading durability. The H03-1051-010 directional valve maintains pressure fluctuation below 0.2MPa under 35MPa peak load. AY11701 O-ring kits achieve zero leakage after 1300 high-pressure cycles. M16-1000-01A disc brakes retain 98% original torque output after 900 hours of heavy braking. Electrical modules sustain error-free operation under 8.5kV electromagnetic interference, outperforming generic alternatives in stability.

2. Core Product Introduction & Functional Description

2.1 Product Introduction

This integrated portfolio covers hydraulic, mechanical, electrical, and sealing subsystems for Canrig TDS top drives. Key products include: hydraulic directional/reducing valves, precision hex nuts, compression springs, O-ring/seal kits, disc brake assemblies, torque boost parts, RTD sensors, pinion gears, proximity sensors, terminal bases, and electrical relays. Each component adheres to Canrig’s OEM machining tolerances, supporting routine maintenance, seasonal overhaul, and emergency repair.

2.2 Core Functional Features

Hydraulic valves regulate flow direction and pressure balance, eliminating surge during pipe tripping. Disc brakes and torque boost assemblies deliver consistent stopping power and torque amplification for heavy loads. Electrical modules ensure accurate temperature sensing (RTDs) and reliable circuit protection. Sealing kits prevent fluid leakage in high-pressure cylinders and valves. Mechanical parts like gears and springs maintain structural stability under vibration.

2.3 Structural Characteristics

All parts adopt modular OEM design with standardized interfaces for plug-and-play replacement. Hydraulic valves use precision lapped sealing surfaces. Seals employ FKM/FFKM materials for corrosion resistance. Electrical components feature dustproof, anti-interference encapsulation. Disc brakes use high-friction composite pads for consistent performance.

3. Applicable Working Conditions & Maintenance Advice

3.1 Applicable Scenarios

Designed for onshore deep wells, offshore platforms, and high-pressure workovers, these parts support 150–1000 ton rig loads. They operate reliably in -30℃ to 65℃ temperatures, resisting salt fog, dust, and H2S corrosion.

3.2 Engineer Practical Maintenance

Replace hydraulic valves every 2000 hours to prevent flow deviation. Inspect disc brake pads every 500 hours. Renew O-ring kits every 2800 hours. Calibrate RTD sensors quarterly. Avoid non-standard parts to prevent system mismatch.

We supply the following spare parts:

Canrig HYD VLV DIR\H03-1051-010\CANRIG\TD
Canrig HEX NUT\HN-0375NC-GR8\CANRIG\TOP DRIVE
Canrig SPRING,COMPRESSION\M14-1011-010\TD
Canrig KIT O-RING TOP DRIVE\AY11701\CANRIG\TDS
Canrig DISC BRAKE\M16-1000-01A\4017AC-122
Canrig SEAL KIT\H18-2513-04A\4017AC-122
Canrig SEAL KIT TORQUE BOOST\S08-1031-010
Canrig bbbbb, RTD,8PT,FLEX I\O\N10007\CANRIG\TD
Canrig O-RING\S01-1259-01N\CANRIG\TD\6027AC-939
Canrig PLUG SOC HEX\H15-090109B-08\TD
Canrig OUTPUT,DIGITAL\N12-3004-010\CANRIG\TD
Canrig INNER BEARING RACE\964-10-0\CANRIG\TD
Canrig SEAL\CANRIG\S05-1009-010\TORQUE BOOST
Canrig RTD\E11088\CANRIG\TOP DRIVE\6027AC-939
Canrig GEAR,PINION,16T\587-16-0\CANRIG\TD
Canrig SHIM,DISC BRAKE\DT13531-125\CANRIG\TD
Canrig KIT SEAL GRIPPER\CANRIG\S08-1003-010
Canrig CYLINDER,bbbb TILT\DT12643\CANRIG\TD
Canrig CIRCUIT BKR\E17-1021-010\CANRIG\TD
Canrig POLYPAK\S03-1009-010\CANRIG\TOP DRIVE
Canrig PROX SENSOR\N02-1006-020\TOP DRIVE
Canrig O-RING\587-97-0\CANRIG\TOP DRIVE\6027AC
Canrig CAPSCR\SH-1000NC-0175-W\CANRIG\TOP DRIVE
Canrig PIN,DIE RETAINER\588-26-0\CANRIG\TD
Canrig O-RING\S01-1452-01N\CANRIG\TD\6027AC-939
Canrig BREATHER\P08-1000-010\CANRIG\TOP DRIVE
Canrig LEVER\CANRIG\E10812
Canrig RETNG RING EXT\M11-1002-010\CANRIG\TD
Canrig QUICK PRESS NIP\H15-1027-010\CANRIG\TD
Canrig SPLINED SHAFT\602-14\CANRIG\TOP DRIVE
Canrig SWITCH,LEVEL\N10100\CANRIG\TD\6027AC-939
Canrig HYD MOTOR\H02-1004-010\CANRIG\TOP DRIVE
Canrig RELAY\E10880\CANRIG\TOP DRIVE\6027AC-939
Canrig TERMINAL BASE 52\N21-1001-010\CANRIG\TD
Canrig KIT W JOR\CANRIG\R10098\TD\6027AC-939
Canrig STUD KIT C\W NUTS\H13-1003010\4017AC-122
Canrig PLATE,COVER TORQUE BOOST\DT12149\CANRIG
Canrig RETNG RING INT\M11-1020-010\CANRIG\TD
Canrig O-RING\CANRIG\S01-1159-01N\6027AC-939
https://www.amlppmfg.com/
Canrig HYD VLV DIR\H03-1052-010\CANRIG\TD
Canrig bbbbb,DIGITAL\N21-3000-010\CANRIG\TD
Canrig O-RING\S01-1254-01N\CANRIG\TD\6027AC-939
Canrig LEVER\CANRIG\E10813
Canrig GUIDE PLATE\588-45-0\CANRIG\TOP DRIVE
Canrig ADAPTER\N21-1000-010\CANRIG\TOP DRIVE
Canrig PRESSURE RELIEF HYD VLV\H06-1007-010\TD
Canrig CALIPER,BRAKE\M16-1000-010\CANRIG\TD
Canrig REDUCING HYD VLV\H05-1001-020\CANRIG\TD
Canrig CAPSCR\SH-1000NC-0550-W\CANRIG\TD
Canrig OUTPUT,DIGITAL\N12-3001-010\CANRIG\TD
Canrig XFMR\E11458\200VA,380\120V,50\60HZ\TD
Canrig SEAL KIT DISC BRAKE\M16-1000-01B\CANRIG

4. On-Site Fault Repair Cases

Case 1: Daqing Onshore Oilfield, TDS-9SA

Load: 3600kN continuous drilling
Fault: Hydraulic direction instability
Repair: Replace H03-1051-010 valve
Result: Pressure stabilized at 21MPa, no surge
Feedback: Hydraulic system reliability improved.

Case 2: Bohai Offshore Platform, TDS-10SA

Load: 4100kN cyclic load
Fault: Disc brake torque loss
Repair: Install M16-1000-01A brake assembly
Result: Torque restored to rated value
Feedback: Braking safety enhanced.

Case 3: Tarim Desert, TDS-11SA

Load: 3900kN high-temperature load
Fault: Torque boost seal leakage
Repair: Replace S08-1031-010 seal kit
Result: Zero leakage at 34MPa
Feedback: Well control safety ensured.

Case 4: Sichuan H2S Well, TDS-8SA

Load: 3500kN corrosive load
Fault: RTD signal drift
Repair: Replace E11088 sensor
Result: Temperature error <0.5℃
Feedback: Drilling precision improved.

5. FAQ

6. Procurement Guidance

This Canrig TDS spare parts range provides standardized production specs and fault-solving references for global drilling teams. Each batch undergoes strict dimensional, hydraulic, and electrical testing. Users can select parts by model, load, and environment to maintain long-term TDS efficiency.

Need assistance with bulk part matching or technical specifications? Reach out anytime.