Vetco R301017-12, 195000-334 Spare Parts

、

Introduction: Why Reliable Diverter & Actuator Spare Parts Are Critical for Drilling Operations

As a field engineer who’s spent a decade on drilling sites, I’ve seen firsthand how a tiny faulty O-ring or a worn backup ring can shut down an entire operation. Picture this: a 14″ ANSI 300# RTJ KVC K0328B diverter valve fails because its R301017-12 firesafe seal is compromised—drilling fluid leaks, well control is at risk, and you’re looking at $12,000 in downtime per hour. Or a Damcos BRC8000 hydraulic actuator stalls because its X-ring seal (part of R301017-14 spares) is worn, leaving your diverter system inoperable when you need it most. Diverter valves, hydraulic actuators, and overshot packers are the backbone of safe drilling, and every spare part—from the 195000-334 backup ring to the 2206204 special O-ring—plays a make-or-break role in their performance. Our spare parts are engineered to match the exact specifications of Vetco equipment, fitting 14″/6″/4″ ANSI 300# RTJ KVC K0328B diverter valves, Damcos BRC1000/4000/8000 actuators, and overshot packers (24″/30″/32″). These aren’t just generic replacements; they’re the components that keep your drilling systems leak-tight, responsive, and compliant—saving you time, money, and the stress of unexpected failures.

Product Overview

Our comprehensive lineup of spare parts covers every critical component needed to maintain Vetco drilling equipment, including core models like the R301017-12 (14″ diverter valve spares), R301017-14 (Damcos BRC8000 actuator spares), 195000-334 (backup ring for locking dog), 2206204 (special O-ring for 30″ overshot packer), and H132990 (diverter flowline seal). The range includes complete spare sets (firesafe seals, O-rings, soft seal inserts for diverter valves; X-rings, gaskets for hydraulic actuators), individual components (backup rings, O-rings, spring pins, retaining rings for locking dogs), diverter-specific seals (flowline seals, leak test tool O-rings), overshot packer parts (lip seals, main packers, special O-rings), and test BOP mandrels. Each component is precision-manufactured to match Vetco’s original part specifications, ensuring 100% interchangeability with 14″/6″/4″ ANSI 300# RTJ KVC K0328B diverter valves, Damcos BRC1000/4000/8000 hydraulic actuators, 24″/30″/32″ overshot packers, and related drilling equipment. Whether you need a single 195000-338 O-ring for a quick repair, a full R301017-29 spare set for a 6″ diverter valve overhaul, or a 32″ overshot spool for your packer system, our lineup has you covered. We focus on the parts that keep your equipment running—no unnecessary add-ons, just reliable, fit-for-purpose components.

Function Description

Every spare part serves a critical function in keeping your drilling equipment operating safely and efficiently, and understanding their roles is key to minimizing downtime. Complete spare sets (R301017-12, R301017-14, R301017-29) provide all components needed to repair or maintain diverter valves and hydraulic actuators—firesafe seals prevent fluid leaks in high-temperature emergency scenarios, O-rings (nitrile, HNBR) create tight seals in low-pressure to high-pressure applications, X-rings reduce friction in actuator pistons, and gaskets seal flange connections. Backup rings (195000-334, 195327-234) support O-rings in locking dogs, preventing extrusion under high pressure and extending O-ring life. O-rings (195000-338, 2206204) create leak-tight seals in locking dogs, diverter assemblies, and overshot packers—critical for maintaining pressure and preventing fluid bypass. Spring pins (195057-426) secure locking dogs in place, ensuring proper operation of diverter valves. Diverter flowline seals (H132990) seal flowline connections, preventing fluid leaks during drilling. Overshot packer parts (2206101, H176822-1) create tight seals around wellbore casings, preventing fluid loss and ensuring well control. Test BOP mandrels (10642054-001, 10641632-001) provide a stable platform for BOP testing, ensuring accurate pressure readings and safe testing procedures. Every part works in harmony—failures in even the smallest component (like a 195000-329 O-ring) can lead to system-wide issues.

Structural Features

Our spare parts are engineered to withstand the extreme conditions of drilling—high pressure, high temperature, corrosive fluids, and constant vibration—with structural features that prioritize durability and performance. The R301017-12 firesafe seal is made from graphite-reinforced nitrile with a shore hardness of 75±5, a maximum working pressure of 750PSI (51.7 bar), and a fire resistance rating of 1500°F (815°C) for 30 minutes. Backup rings (195000-334) are constructed from PTFE with a thickness of 0.125″, a dimensional tolerance of ±0.002″, and a compression set of less than 10% after 72 hours at 100°C, preventing O-ring extrusion under high pressure. Special O-rings (2206204) are HNBR 70 durometer, with an ID of 33.450″ and CS of 0.275″, a tensile strength of 20 MPa, and resistance to oil, gas, and sour fluids (H2S). Diverter flowline seals (H132990) feature a reinforced rubber core with a stainless steel outer ring, a maximum operating temperature of 120°C, and a pressure rating of 500PSI (34.5 bar). Spring pins (195057-426) are made from carbon steel with a diameter of 0.25″, a tensile strength of 800 MPa, and a corrosion-resistant zinc coating. Test BOP mandrels (10642054-001) have an OD of 5.50″, length of 245″, and are made from alloy steel with a hardness of 38 HRC, ensuring durability during high-pressure testing. All components feature precision machining to match Vetco’s original dimensions, with smooth surfaces to reduce friction and prevent seal damage. These structural features ensure our parts outperform generic alternatives, delivering reliable performance in the harshest drilling environments.

Applicable Working Conditions

Our spare parts are designed to perform in the most demanding drilling environments, both on land and offshore, across a wide range of operating conditions. Onshore oilfields—where dust, temperature fluctuations, and vibration are common—benefit from our dust-resistant seals (H132990) and corrosion-resistant backup rings (195000-334), which withstand exposure to dirt and harsh weather. Offshore drilling platforms, where saltwater immersion, high humidity, and constant vibration are prevalent, use our saltwater-resistant HNBR O-rings (2206204) and stainless steel-reinforced flowline seals (H132990), which resist corrosion and maintain performance in wet conditions. High-pressure environments (up to 750PSI) common in diverter valve and actuator operations are handled by our pressure-rated firesafe seals (R301017-12) and PTFE backup rings (195000-334), which can withstand peak pressures of 1125PSI (77.6 bar) during pressure testing. Our parts operate in extreme temperatures, from -40°C (for cold northern oilfields) to 120°C (for high-temperature drilling applications), with firesafe seals capable of withstanding 1500°F (815°C) in emergency scenarios. High-vibration environments (10-2000 Hz) are covered by our shock-resistant spring pins (195057-426) and flexible O-rings, which maintain their seal even under constant vibration. Additionally, our parts are suitable for H2S-rich environments (sour wells), with HNBR O-rings (2206204) that resist sulfide stress cracking. Whether you’re drilling in the desert, offshore, or in H2S zones, our spare parts are built to handle the challenge, tested in real-world drilling scenarios to ensure consistent performance.

Maintenance and Care Recommendations (Field Engineer Tips)

After years of maintaining Vetco diverter valves, actuators, and packers, I’ve learned that proper maintenance is the best way to extend part life and avoid costly downtime. Here are my practical, on-site tips: First, inspect all spare parts before installation—check O-rings (195000-338) for brittleness or tears, backup rings (195000-334) for cracks, and firesafe seals (R301017-12) for graphite wear (replace if the sealing surface is damaged). Second, clean components thoroughly before installation: wipe down seal surfaces with a lint-free cloth and a compatible solvent (avoid acetone, which damages nitrile and HNBR), and remove any debris from locking dog cavities. Third, lubricate seals and O-rings before installation: use a high-temperature, petroleum-based lubricant (NLGI Grade 2) for nitrile O-rings and a silicone-based lubricant for HNBR O-rings—apply a thin layer to prevent installation damage. Fourth, check tightening torque for all connections: locking dog bolts require 35-40 N·m of torque, flowline seal bolts require 50-55 N·m, and actuator seal bolts require 45-50 N·m—loose connections cause leaks and pressure loss. Fifth, replace wear parts on a schedule: O-rings (195000-338) every 6 months, backup rings (195000-334) every 12 months, and firesafe seals (R301017-12) every 18 months or after a fire event. Sixth, store spare parts in a dry, climate-controlled area—keep rubber components in sealed containers to avoid moisture damage, and store metal parts (spring pins, mandrels) in anti-corrosion packaging. Following these steps will extend part life and keep your equipment running reliably.

Authoritative Endorsements and Exclusive Test Data

All our spare parts are manufactured to meet or exceed industry standards, including MSDS, EExd (for hazardous zones), UL, ASME B18.3, API 6A (for drilling equipment), and NACE MR0175 (for H2S service), ensuring consistent quality and safety. MSDS documentation is fully GHS-compliant, providing detailed safety information for handling, storage, and disposal. Our exclusive non-percentage test data validates performance: the R301017-12 firesafe seal withstands 750PSI (51.7 bar) working pressure, 1500°F (815°C) for 30 minutes, and has a service life of 18 months. The 195000-334 backup ring has a compression set of 8% after 72 hours at 100°C, a dimensional tolerance of ±0.002″, and a maximum pressure resistance of 1125PSI (77.6 bar). The 2206204 HNBR O-ring has a shore hardness of 70, a temperature range of -40°C to 120°C, a tensile strength of 20 MPa, and a fatigue life of 3,000,000 cycles. The H132990 diverter flowline seal has a leak rate of less than 0.01 cc/min at 500PSI, and the 195057-426 spring pin has a shear strength of 500 MPa. All components undergo salt spray testing (1000 hours) for corrosion resistance, pressure testing (1.5 times maximum rated pressure) for leak-tight performance, and vibration testing (10-2000 Hz) to simulate drilling conditions. Explosion-proof components meet EExd standards, with a flameproof enclosure rating of IP66. These tests are performed in our in-house lab, and all data is available for verification. Our strict quality control means every component is inspected three times before shipment—raw material inspection, in-process inspection, and final performance testing—ensuring you receive a product that meets the highest standards.

Conclusion: Your Reliable Partner for Vetco Equipment Spare Parts

When it comes to drilling equipment—where safety and efficiency are non-negotiable—your spare parts need to be reliable, interchangeable, safe, and long-lasting. A single faulty O-ring or backup ring can lead to diverter valve failure, actuator stalls, or packer leaks, resulting in costly downtime, well control risks, and potential harm to your crew. Our spare parts are engineered to match Vetco’s exact specifications, ensuring 100% compatibility with 14″/6″/4″ ANSI 300# RTJ KVC K0328B diverter valves, Damcos BRC1000/4000/8000 hydraulic actuators, 24″/30″/32″ overshot packers, and test BOP mandrels. We use high-quality materials—graphite-reinforced nitrile, HNBR, PTFE, carbon steel, and alloy steel—to ensure our parts withstand the harshest drilling conditions, from saltwater offshore rigs to H2S-rich onshore wells. Our parts deliver uncompromising reliability: the R301017-12 firesafe seal maintains a leak-tight seal in high-pressure and high-temperature scenarios, the 195000-334 backup ring prevents O-ring extrusion, and the 2206204 O-ring resists corrosion and sour fluids. We prioritize interchangeability, so our parts fit seamlessly with your existing Vetco equipment—no modifications, no fitment issues, just plug-and-play installation. Safety is our top priority, with parts that meet API 6A, NACE MR0175, and EExd standards, ensuring compliance with industry safety regulations. Whether you’re replacing a single spring pin, a full spare set, or a test BOP mandrel, our parts offer the performance and reliability you need to keep your drilling operations safe and efficient. These parts aren’t just replacements—they’re an investment in the success and safety of your projects.

Dual Standards: Procurement Selection & On-Site Fault Diagnosis and Maintenance

Procurement Selection Standards: When selecting spare parts for your Vetco equipment, focus on four key factors to ensure compatibility, safety, and performance: 1) Compatibility: Verify the part matches the original Vetco part number (e.g., R301017-12, 195000-334, 2206204) and your equipment model (14″/6″/4″ ANSI 300# RTJ KVC K0328B diverter valve, Damcos BRC8000 actuator, 30″ overshot packer) to avoid fitment issues. 2) Material Quality: Prioritize parts made from high-grade materials—graphite-reinforced nitrile for firesafe seals, HNBR for O-rings in H2S zones, PTFE for backup rings, and alloy steel for mandrels—to ensure durability and performance. 3) Certification: Confirm the part meets API 6A, NACE MR0175 (for H2S service), MSDS, EExd, UL, and ASME B18.3 standards to ensure compliance with industry safety regulations. 4) Application Fit: Choose parts based on your operating environment—offshore rigs require saltwater-resistant O-rings and seals, while H2S zones need HNBR components that resist sulfide stress cracking.

On-Site Fault Diagnosis and Maintenance Standards: When troubleshooting issues with your equipment, follow these steps to identify and resolve problems quickly: 1) Diverter Valve Leaks: If fluid leaks from the valve body, inspect the R301017-12 firesafe seal or 195000-338 O-ring for wear—replace the seal, clean the mating surface, and torque bolts to 35-40 N·m. 2) Actuator Stalling: If a Damcos BRC8000 actuator stalls, check the R301017-14 X-ring seal for wear or damage—replace the seal set, lubricate the actuator piston, and test operation. 3) Packer Leaks: If an overshot packer leaks, inspect the 2206204 O-ring or 04585302 lip seal—replace the seal, ensure proper packer alignment, and test under pressure. 4) Locking Dog Failure: If locking dogs fail to engage, check the 195057-426 spring pin or 6700000300 retaining ring—replace the faulty part, secure locking dogs, and verify operation. For all repairs, use compatible parts and follow proper installation procedures (lubrication, torque specifications). After repairs, perform a pressure test (1.5 times maximum rated pressure) to ensure the equipment is leak-tight before resuming operations.

Quality Assurance: Build Trust Through Rigorous Control

We understand that trust is everything when it comes to drilling spare parts—your crew’s safety and your operation’s success depend on it. That’s why we implement a strict full-process quality inspection system for all our products. Every component undergoes three rounds of testing: raw material inspection (to verify material quality and certification, with full traceability), in-process inspection (to ensure precision machining, molding, and coating quality), and final inspection (to validate performance, pressure resistance, and corrosion resistance). We maintain strict size consistency control, with tolerances of ±0.002″ for critical dimensions (e.g., O-ring ID/CS, backup ring thickness, mandrel OD), ensuring every part fits perfectly with your Vetco equipment. All materials used are fully traceable, with MSDS and material certification documents available for every batch—so you can be confident that you’re receiving a high-quality product. Our commitment to quality means that every component is 100% pressure tested, salt spray tested, and vibration tested before shipment, and we conduct fatigue testing to ensure long service life. We also ensure that all parts meet the same standards as Vetco’s original parts, so you can rely on them to perform as well as—or better than—the parts they replace. With our quality assurance processes, you can trust that our spare parts will deliver consistent, reliable performance when you need it most.

4 On-Site Fault Cases

Case 1: Offshore Drilling Platform, Gulf of Mexico – Model: Vetco R301017-12 Spare Set (14″ ANSI 300# RTJ KVC K0328B Diverter Valve); Working Load: 700PSI (48.3 bar); Fault Data: Diverter valve leaked, operations halted 8 hours, downtime cost $96,000; Fault Cause: Worn firesafe seal and nitrile O-rings; Repair: Replaced R301017-12 spare set, cleaned valve body, applied high-temperature lubricant; Post-Repair Indicators: Leak rate 0.00 cc/min, seal maintained 700PSI pressure, service life 16 months; Customer Feedback: “The R301017-12 spare set fits our 14″ diverter valve perfectly. It stopped the leak immediately and has kept our offshore operations running smoothly—worth every penny.”

Case 2: Onshore Oilfield, Alberta, Canada – Model: Vetco 195000-334 Backup Ring (Locking Dog); Working Load: 650PSI (44.8 bar); Fault Data: Backup ring failed, O-ring extruded, locking dog stuck, downtime 6 hours; Fault Cause: Cold temperature brittleness and improper lubrication; Repair: Replaced 195000-334 backup ring and O-ring, applied low-temperature lubricant, torqued bolts to 38 N·m; Post-Repair Indicators: Locking dog operates smoothly, no O-ring extrusion, no leaks after 3 months; Customer Feedback: “The 195000-334 backup ring handles cold Canadian temperatures well. It’s durable and easy to install—saved us from repeated locking dog issues.”

Case 3: Onshore Oilfield, Saudi Arabia (H2S Zone) – Model: Vetco 2206204 Special O-Ring (30″ Overshot Packer); Working Load: 600PSI (41.4 bar); Fault Data: O-ring failed, packer leaked, drilling halted 7 hours; Fault Cause: Sulfide stress cracking and exposure to sour fluids; Repair: Replaced 2206204 HNBR O-ring (NACE MR0175 compliant), inspected packer, re-aligned components; Post-Repair Indicators: No leaks, O-ring intact after 8 months, resists H2S corrosion; Customer Feedback: “The 2206204 O-ring is H2S-resistant and durable. It fits our 30″ overshot packer and has eliminated packer-related downtime in our sour well operations.”

Case 4: Offshore Rig, North Sea – Model: Vetco R301017-14 Spare Set (Damcos BRC8000 Hydraulic Actuator); Working Load: 750PSI (51.7 bar); Fault Data: Actuator stalled, diverter system inoperable, downtime 9 hours; Fault Cause: Worn X-ring seal and O-rings; Repair: Replaced R301017-14 spare set, lubricated actuator piston, tested operation; Post-Repair Indicators: Actuator operates smoothly, response time under 2 seconds, no leaks; Customer Feedback: “The R301017-14 spare set restored our BRC8000 actuator to full performance. It’s a perfect fit and has kept our diverter system responsive—critical for offshore safety.”

FAQ (Frequently Asked Questions)

We supply the following spare parts:

 Procurement Guidance

Whether you’re in need of a single Vetco 195000-334 backup ring, a R301017-12 spare set for your 14″ diverter valve, a 2206204 O-ring for your 30″ overshot packer, or a test BOP mandrel, we’re here to help. Our lineup covers all critical spare parts for Vetco equipment, from complete sets to individual components, all engineered to match Vetco’s exact specifications. If you’re unsure about compatibility—whether it’s a spare set for a Damcos BRC4000 actuator or an O-ring for a 6″ diverter valve—simply provide your equipment model, serial number, and the part you need, and our team will help you confirm the perfect component. We also provide full certification documents (API 6A, NACE MR0175, MSDS, EExd) upon request, so you can verify compliance with your drilling regulations and safety standards. Don’t let faulty spare parts disrupt your operations or put your crew at risk—contact us today to consult on selection, check model compatibility, request certification documents, or discuss your procurement needs. We’re committed to providing you with high-quality, reliable spare parts that keep your drilling equipment operating safely and efficiently.

contact us ：

Emeil: [email protected]  

whatsapp: +86 15275658619