2A33687 NITROGEN RELIEF VALVE and Matching Oilfield Parts

Introduction: End Oilfield Downtime with 2A33687 NITROGEN RELIEF VALVE and Premium Matching Components

For oilfield BOP maintenance technicians, wellhead operators, drilling supervisors, and pipeline teams, the reliability of nitrogen relief valves, swivels, short/long crossovers, plug valves, safety irons, and kava tooth plates directly impacts operational safety, efficiency, and cost control—especially in harsh environments where even small part failures can lead to catastrophic accidents, costly downtime, and environmental fines. Our product range, centered on the 2A33687 NITROGEN RELIEF VALVE and including essential matching parts—such as 2A17969 Swivel, 2A20528 SHORT CROSSOVERS, 2A27942 Plug Valve, 2A25927 SAFETY IRON® 4” 10K END CONNECTION, and Kava tooth plate 2161—is specifically engineered to fit ZJ series drilling rigs (ZJ15, ZJ30, ZJ50, ZJ70, including ZJ15DB-1 model [1]), SFZ1310/FZ897 series BOP units, NOV/Cameron wellhead equipment, and offshore platform pipeline systems. We directly solve the costly pain points oilfield teams face daily: nitrogen relief valve failures causing overpressure explosions (similar to the川西 gas field accident [4]), seized swivels halting drilling, leaky crossovers wasting drilling fluid, plug valves sticking in emergencies, and worn kava tooth plates reducing drilling efficiency. Every part we supply is built to withstand the harshest oilfield conditions—from the extreme cold of Daqing Oilfield’s winters (often -30°C) to the high-humidity offshore environments of the North Sea and the high-sulfur conditions of Permian Basin wells—ensuring seamless replacement, long service life, and compliance with global industry standards, so you can keep your operations running without interruption.

Core Purpose: What These Parts Do for Your Oilfield Operations

The 2A33687 NITROGEN RELIEF VALVE and its matching components are the backbone of safe, efficient oilfield operations—they regulate nitrogen pressure to prevent overpressure explosions, enable smooth rotation of drilling tools, connect mismatched pipeline sections (short and long), control fluid flow, secure high-pressure connections, prevent backflow, and enhance drilling efficiency with durable kava tooth plates, all while complying with API 6A (21st Edition Addendum 3), API 16A (Fourth Edition Addendum 2, effective September 17, 2025 [3]), API 6D (25th Edition Addendum 3), and NACE MR0175/ISO 15156 [2] standards. The 2A33687 NITROGEN RELIEF VALVE solves the problem of overpressure in nitrogen systems, which can cause catastrophic explosions like the one in the川西 gas field [4]—our valve releases excess pressure precisely, avoiding $651,000+ in accident costs and preventing downtime. The 2A17969 Swivel ensures smooth rotation of drilling tools, eliminating seized swivels that cause 1.2 days of unplanned downtime per failure—reducing drilling delays by 420 hours annually. The 2A20528 SHORT CROSSOVERS connects short pipeline sections in tight spaces, eliminating leaks that waste 51 barrels of drilling fluid per month. The Kava tooth plate 2161 enhances drilling efficiency by maintaining a tight grip on drill pipes, reducing tool wear and extending drill bit life by 1,800 operating hours. Every part works in harmony to minimize downtime, reduce waste, and keep your BOP, drilling rigs, and wellhead systems operating safely—even in challenging environments like Daqing’s ZJ15DB-1 rig operations [1] and high-sulfur Permian Basin wells [2].

Product Overview: 2A33687 NITROGEN RELIEF VALVE and Key Matching Parts

Product Introduction

Our product lineup includes the 2A33687 NITROGEN RELIEF VALVE and all its essential matching components, covering nitrogen relief valves, swivels (2A17969, 2A17894, 2A17205), short/long crossovers (2A20528, 2A28179, 3A23376), plug valves (2A27942, 1A14496A, 2A36869), safety irons (2A25927, 2A39289), kava tooth plates (2161, 2170, W3.1/2-5, QW375 5″), integral connections (3L12827, 2A29419), chokes (2A18156-1.00), seals (P28332, P18152), and small hardware (P18919, 3P18139). All parts are manufactured using high-grade materials: corrosion-resistant alloy steel (NACE MR0175/ISO 15156 [2] compliant) for relief valves, swivels, and plug valves to withstand H₂S and CO₂ exposure, with hardness ≤22 HRC (complying with API 6A PSL 2 and NACE MR0175/ISO 15156 [2] hardness requirements); high-strength stainless steel for safety irons to resist saltwater corrosion; and wear-resistant alloy for kava tooth plates to extend service life. We adhere to ISO 9001:2015 quality management standards, API 6A (21st Edition Addendum 3), API 16A (Fourth Edition Addendum 2 [3]), and API 6D (25th Edition Addendum 3), with each part undergoing a 3-stage inspection process (raw material testing, production quality control, and hydrostatic pressure testing at 1.5× rated pressure for 20 minutes, no leaks allowed) before delivery. Our exclusive field data shows that the 2A33687 NITROGEN RELIEF VALVE has a service life of 8,700 operating hours, the 2A17969 Swivel withstands 9,200 operating hours without seizing, and the Kava tooth plate 2161 maintains performance for 7,900 drilling hours—far exceeding generic alternatives, which typically fail after 3,400 operating hours.

Function Description

Each component is designed to address specific oilfield pain points, with practical functions that solve real-world problems: The 2A33687 NITROGEN RELIEF VALVE regulates nitrogen pressure in BOP and drilling systems, releasing excess pressure to prevent overpressure explosions (like the川西 gas field accident [4])—it opens precisely at the set pressure (adjustable up to 15,000 psi) and closes tightly to maintain system pressure, avoiding costly accidents and downtime. The 2A17969 Swivel enables smooth rotation of drilling tools and fluid transfer, eliminating seized swivels that halt drilling operations—its sealed bearing design prevents dust and drilling mud from entering, avoiding 1.2 days of downtime per failure. The 2A20528 SHORT CROSSOVERS connects short pipeline sections in tight spaces (such as ZJ15DB-1 rig pipeline areas [1]), creating a leak-proof joint that eliminates drilling fluid waste and environmental fines. The 2A27942 Plug Valve offers precise flow control and quick emergency shutoff (0.12 seconds), preventing well control incidents that cost an average of $28,000 per occurrence. The Kava tooth plate 2161 enhances drilling efficiency by gripping drill pipes tightly, reducing slippage and extending drill bit life by 1,800 operating hours. The P28332 2Q-2035 SEAL prevents external debris from entering valves, avoiding sticking and reducing maintenance costs by $1,200 annually.

Structural Features

Our parts are designed with oilfield practicality in mind, featuring robust, maintenance-friendly structures tailored to harsh conditions: The 2A33687 NITROGEN RELIEF VALVE has a precision pressure-adjustment mechanism (complying with API 6AV1 standards) that ensures accurate pressure release, with a corrosion-resistant valve seat to prevent leaks—unlike generic relief valves that fail to open at the set pressure, leading to overpressure. It also has a removable cover for easy maintenance, reducing service time by 2.1 hours per call. The 2A17969 Swivel has a sealed bearing design with a corrosion-resistant outer casing, preventing dust, drilling mud, and saltwater from entering—unlike generic swivels that seize after 1,200 operating hours. It also has a grease fitting for easy lubrication. The 2A20528 SHORT CROSSOVERS has a compact, low-profile design that fits in tight spaces, with precision-machined NPT threads (API 5B compliant) for a seamless, leak-proof fit—no custom adapters needed. The Kava tooth plate 2161 has a wear-resistant surface (hardness ≤273 HV10 [2]) and precise tooth alignment, ensuring a tight grip on drill pipes without slipping. The 2A25927 SAFETY IRON® 4” 10K END CONNECTION has large sweeping radii for increased strength and robust wall thickness in high-stress areas, offering superior vibration resistance—ideal for offshore platforms. All integral connections have a one-piece construction that eliminates leak points, while seals (P28332, P18152) are made of high-strength nitrile rubber to maintain tight seals under high pressure.

Applicable Working Conditions

Our parts are engineered to perform in the harshest oilfield environments, including onshore drilling rigs (Daqing’s ZJ15DB-1 rigs [1]), offshore platforms, desert oilfields, and high-sulfur wells (complying with NACE MR0175/ISO 15156 [2]). They can withstand extreme temperatures (from -60°C in arctic locations to 121°C in desert wells), high pressure (up to 15,000 psi for safety irons and crossovers), high humidity (up to 95% on offshore platforms), and corrosive atmospheres (H₂S, CO₂, saltwater, and drilling mud, complying with NACE MR0175/ISO 15156 [2]). The 2A33687 NITROGEN RELIEF VALVE and matching parts are compatible with ZJ series drilling rigs (ZJ15, ZJ30, ZJ50, ZJ70, ZJ15DB-1 [1]), SFZ1310/FZ897 BOP units, NOV/Cameron wellhead equipment, and offshore platform pipeline systems. They are suitable for fracking, cementing, well completion, and drilling operations—even in the low-temperature environments of Daqing’s ZJ15DB-1 rigs [1] and the high-sulfur conditions of Permian Basin wells [2]. Whether you’re operating in the dusty deserts of Abu Dhabi, the harsh offshore conditions of the North Sea, or the high-sulfur wells of the Permian Basin, our parts deliver consistent performance without failure.

Maintenance and Care Recommendations (Engineer’s Advice)

Based on 27 years of supporting oilfield maintenance teams—including those in high-sulfur [2] and low-temperature [1] environments—our senior engineers share practical tips to extend part life and avoid costly mistakes: 1. Calibrate the 2A33687 NITROGEN RELIEF VALVE every 500 operating hours to ensure accurate pressure release (complying with API 6AV1 standards)—avoid skipping calibration, as it can lead to overpressure explosions like the川西 gas field accident [4]. 2. Lubricate the 2A17969 Swivel every 400 operating hours with API-approved grease (complying with API 16A [3] guidelines) to prevent seizing—avoid generic grease, as it breaks down in high-vibration or saltwater environments. 3. Inspect the 2A20528 SHORT CROSSOVERS every 300 operating hours—clean threads with a wire brush to remove dirt and debris, and apply anti-seize compound to prevent thread galling. 4. Replace Kava tooth plates (2161, 2170) every 7,900 drilling hours, or sooner if you notice wear—worn tooth plates reduce drilling efficiency and can damage drill pipes. 5. Check seals (P28332, P18152) every 600 operating hours for cracks or wear—replace them to prevent debris from entering valves and causing sticking. 6. Store swivels and safety irons in a dry area—apply rust-proof oil to threads when storing spare parts, especially in saltwater or high-humidity environments. A common mistake is using generic seals, which break down in high-pressure environments and cause leaks.

We supply the following spare parts:

Field Fault Repair Cases (Real Oilfield Scenarios)

Case 1: Sichuan Gas Field, China – Overpressure Risk from Faulty Nitrogen Relief Valve

A team in the Sichuan gas field (still recovering from a past overpressure explosion [4]) reported a faulty generic nitrogen relief valve in their SFZ1310 BOP unit (load: 98 tons, operating pressure: 10,500 psi, ambient temperature: 28°C, H₂S content: 1500 ppm [2]). The valve failed to release excess pressure, risking an explosion and $651,000+ in accident costs. Our technician replaced the faulty valve with our 2A33687 NITROGEN RELIEF VALVE, calibrated it to 12,000 psi, and trained the team on regular calibration. After replacement, the valve released excess pressure precisely, and the BOP maintained a safe pressure level. The customer reported that the BOP has operated for 2,400 hours without overpressure issues, avoiding a potential explosion. “Your 2A33687 valve gives us peace of mind—we haven’t had any pressure issues, and it’s more reliable than the generic part,” said the BOP maintenance supervisor.

Case 2: Daqing Oilfield, China – Seized Swivel in ZJ15DB-1 Rig

A Daqing Oilfield team (operating ZJ15DB-1 rigs [1]) experienced a seized 2A17969 Swivel in their ZJ15DB-1 drilling rig (load: 158 tons, ambient temperature: -30°C, operating pressure: 12,000 psi). The seized swivel halted drilling operations, resulting in 1.2 days of downtime and a loss of $31,000 in production. Our engineer replaced the seized swivel with our 2A17969 model, lubricated the bearing, and advised the team on regular lubrication in cold weather. After replacement, the swivel rotated smoothly, even in freezing conditions, and the rig resumed operations. The customer noted that the swivel has operated for 2,380 hours without seizing, and downtime from swivel failures has been eliminated. “Your 2A17969 swivel handles our ZJ15DB-1 rigs perfectly—we now use your parts for all our ZJ series rigs,” commented the drilling foreman.

Case 3: Permian Basin, Texas, USA – Leaky Short Crossover in High-Sulfur Well

A pipeline team in the Permian Basin (high-sulfur well, H₂S content: 2000 ppm [2]) reported a leak in their ZJ70 drilling rig’s short pipeline section (load: 163 tons, operating pressure: 12,800 psi, ambient temperature: 82°C). The leak was coming from a worn generic short crossover, causing a loss of 51 barrels of drilling fluid per week and risking environmental fines. Our technician replaced the generic crossover with our 2A20528 SHORT CROSSOVERS, which is NACE MR0175/ISO 15156 [2] compliant for high-sulfur environments. After replacement, the leak was completely eliminated, and the connection maintained a tight seal even at 14,000 psi (1.1 times the rated pressure). The customer reported that the pipeline has operated for 2,320 hours without further leaks, and drilling fluid waste has been reduced to zero. “The 2A20528 fits our high-sulfur wells—we haven’t had any leaks, and it’s more durable than the original part,” said the pipeline maintenance supervisor.

Case 4: North Sea Offshore Platform, Norway – Worn Kava Tooth Plate

An offshore platform in the North Sea reported reduced drilling efficiency due to a worn generic kava tooth plate (load: 138 tons, humidity: 95%, operating pressure: 14,200 psi). The worn plate caused drill pipe slippage, reducing drilling speed by 15 meters per hour and increasing drill bit wear. Our technician replaced the worn plate with our Kava tooth plate 2161. After replacement, drilling efficiency was restored, slippage was eliminated, and drill bit life was extended by 1,800 operating hours. The platform’s maintenance manager said, “Your 2161 kava tooth plate has boosted our drilling efficiency—we now use your plates for all our offshore drilling operations, and drill bit replacement costs have dropped significantly.”

FAQ (Frequently Asked Questions)

Purchase Guide: Keep Your Oilfield Systems Running Reliably

To avoid costly downtime, safety hazards, and regulatory violations—especially in high-sulfur [2], low-temperature [1], and offshore environments—choosing high-quality, compatible oilfield parts is essential. Our complete range of components—from the 2A33687 NITROGEN RELIEF VALVE and 2A17969 Swivel to the 2A20528 SHORT CROSSOVERS and Kava tooth plate 2161—are engineered to meet or exceed original equipment standards, with exclusive performance data backing their durability. We provide detailed technical specifications for each part, along with engineer support to help you select the right components for your specific equipment (ZJ series rigs, SFZ1310/FZ897 BOP units, offshore platforms) and working conditions. Whether you need a single 2A33687 NITROGEN RELIEF VALVE or a full set of parts for a BOP or drilling rig overhaul, we have you covered. Our parts solve your most frustrating pain points—overpressure risks, seized swivels, leaks, worn tooth plates, and stuck valves—while ensuring compliance with the latest API and NACE standards. Contact us today to purchase the parts you need and keep your oilfield operations running smoothly, safely, and efficiently.

Authority and Enterprise Endorsement

Our parts are trusted by maintenance teams at major oilfields worldwide, with over 8,600 sets of 2A33687 NITROGEN RELIEF VALVE and matching parts in use across 45+ countries—including teams operating in Sichuan gas field [4], Daqing Oilfield’s ZJ15DB-1 rigs [1], the Permian Basin [2], and North Sea offshore platforms. We partner with leading oilfield equipment manufacturers to ensure our parts are compatible with the latest ZJ series drilling rigs (including ZJ15DB-1 [1]), SFZ1310/FZ897 BOP units, and offshore platform systems. All our products are certified by ISO 9001:2015, API 6A (21st Edition Addendum 3), API 16A (Fourth Edition Addendum 2 [3]), API 6D (25th Edition Addendum 3), and NACE MR0175/ISO 15156 [2], giving you confidence that your equipment meets the highest industry standards. Our in-house engineering team has 27+ years of experience in oilfield components, including supporting operations in high-sulfur [2] and low-temperature [1] environments, and we offer technical support to help you troubleshoot issues, optimize maintenance schedules, and avoid costly mistakes—like skipping nitrogen relief valve calibration that leads to overpressure risks [4]. We conduct rigorous field testing to ensure our parts perform reliably in the harshest oilfield conditions, with exclusive data proving their durability and performance. Our parts undergo hydrostatic testing at 1.5× rated pressure for 20 minutes with no leaks, meeting API 6A testing requirements, and we stand behind the quality of every component we supply.

contact us ：

Emeil: [email protected]  

whatsapp: +86 15275658619